IS205X, IS206X IS205, IS206 NON-BASE LEAD OPTICALLY COUPLED ISOLATOR PHOTOTRANSISTOR OUTPUT APPROVALS z UL recognised, File No. E91231 Dimensions in mm 2.54 Package Code " GG " 7.0 6.0 'X' SPECIFICATIONAPPROVALS z VDE 0884 in 3 available lead form :- STD - G form 1 2 6 5 3 4 1.2 7.62 6.62 - SMD approved to CECC 00802 7.62 4.0 3.0 13° Max 0.5 DESCRIPTION The IS205, IS206 series of optically coupled isolators consist of an infrared light emitting diode and a NPN silicon photo transistor in a standard 6 pin dual in line plastic package with the base pin unconnected. FEATURES z Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. z High Current Transfer Ratio (50% min) z High Isolation Voltage (5.3kVRMS ,7.5kVPK ) z Base pin unconnected for improved noise immunity in high EMI environment APPLICATIONS z DC motor controllers z Industrial systems controllers z Signal transmission between systems of different potentials and impedances OPTION SM OPTION G SURFACE MOUNT 7.62 3.0 0.5 3.35 0.26 ABSOLUTEMAXIMUMRATINGS (25°C unless otherwise specified) Storage Temperature -55°C to + 150°C Operating Temperature -55°C to + 100°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUTDIODE Forward Current Reverse Voltage Power Dissipation 60mA 6V 105mW OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO Emitter-collector Voltage BVECO Collector Current Power Dissipation 30V 6V 50mA 160mW POWER DISSIPATION 0.6 0.1 10.46 9.86 1.25 0.75 Total Power Dissipation 200mW (derate linearly 2.67mW/°C above 25°C) 0.26 10.16 ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1UD Tel: (01429) 863609 Fax :(01429) 863581 17/7/08 DB92011 ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted ) PARAMETER Input MIN TYP MAX UNITS Forward Voltage (VF) 1.2 Reverse Current (IR) Output Coupled Collector-emitter Breakdown (BVCEO) ( Note 2 ) Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) Current Transfer Ratio (CTR) (Note 2) IS205 IS206 Input to Output Isolation Voltage VISO Note 1 Note 2 17/7/08 tr tf V IF = 10mA 10 μA VR = 6V V IC = 1mA V nA IE = 100μA VCE = 10V % % 10mA IF , 10V VCE 10mA IF , 10V VCE V 10mA IF , 0.5mA IC VRMS VPK See note 1 See note 1 Ω VIO = 500V (note 1) μs μs VCC = 5V, IF = 10mA, RL = 75Ω 6 50 100 50 0.4 5300 7500 Input-output Isolation Resistance RISO 5x1010 Output Rise Time Output Fall Time 1.5 30 Collector-emitter SaturationVoltageVCE (SAT) 2 2 TEST CONDITION Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. DB92011m-AAS/A2 Collector Power Dissipation vs. Ambient Temperature Collector Current vs. Collector-emitter Voltage 150 100 50 50 30 40 20 30 15 20 10 10 IF = 5mA 0 0 -30 0 25 50 75 100 0 125 6 8 Collector-emitter Saturation Voltage vs. Ambient Temperature 60 50 40 30 20 0 -30 0 25 50 75 100 125 Collector-emitter saturation voltage VCE(SAT) (V) Forward Current vs. Ambient Temperature 10 0.12 IF = 10mA IC = 0.5mA 0.10 0.08 0.06 0.04 0.02 0 -30 0 25 50 75 100 Ambient temperature TA ( °C ) Relative Current Transfer Ratio vs. Ambient Temperature Relative Current Transfer Ratio vs. Forward Current Relative current transfer ratio 1.5 10 0.14 Ambient temperature TA ( °C ) Relative current transfer ratio 4 Collector-emitter voltage VCE ( V ) 70 IF = 10mA VCE = 10V 1.0 0.5 1.4 1.2 1.0 0.8 0.6 0.4 VCE = 10V TA = 25°C 0.2 0 0 -30 17/7/08 2 Ambient temperature TA ( °C ) 80 Forward current IF (mA) TA = 25°C 50 Collector current IC (mA) Collector power dissipation PC (mW) 200 0 25 50 75 Ambient temperature TA ( °C ) 100 1 2 5 10 20 50 Forward current IF (mA) DB92011m-AAS/A2