8 revision for dwg # 1PB-2ALFxLB-yyy 6 6 rev ch.no. - - date description original design 2 11/2/2007 revised by Philipp E. 1 3 28.90 mm [1.1 in] max. 6 mm [.25 in] 37 mm [1.5 in] 61 mm [2.4 in] 85 mm [3.4 in] 19.00 mm [.7 in] 4 7 5 * = Selector Switch is supplied with mounting bracket, bulb holder and LED (ITEM 1,2,3,4 and 5) ** = Switch Contacts must be ordered separatly Up to four switch contacts can be installed. ITEM DESCRIPTION max. 6 mm [.25 in] 37 mm [1.5 in] 50 mm [2.0 in] 74 mm [2.9 in] 012 024 048 110 230 230D 98 mm [3.9 in] For maintained action use Cat. No. 2PPM (ITEM 7) unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. yyy = Voltage = 12V AC/DC = 24V AC/DC = 48V AC/DC = 110V AC/DC = 230V AC = 230V DC titel CAT. NO. 2ALF1LB-yyy 2ALF3LB-yyy LED Illuminated Metal 2ALF4LB-yyy 1* Selector Switch (Flush, 2ALF5LB-yyy Momentary) 2ALF6LB-yyy 2ALF7LB-yyy 2ALF8LB-yyy 2* Mounting Bracket 2BRK 3* LED Bulb MCB9xyyy 4* Mounting Bracket Screws incl. in 2BRK 5* Blub Holder 2LHB 6 Panel 7 Maintained Action mechanisim 2PPM S1 S2 8** Switch Contacts S3 S4 COLOR MIN. QTY. MAX. QTY. White 1 1 Green 1 1 Red 1 1 Amber 1 1 Blue 1 1 Clear 1 1 Yellow 1 1 1 1 1 1 2 2 1 1 Black 1 1 Green 1 4 Red 1 4 Green/Black 1 4 Red/Black 1 4 22 mm LED Illuminated Metal Flush Momentary Operator 2ALFxLB-yyy (x=color, yyy=voltage) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/2/2007 drawing no.: rev.: 11/2/2007 1PB-2ALFxLB-yyy 11/2/2007 scale: - - sheet: 1 of: 1