OKI Semiconductor MR27T3202L 2MWord x 16Bit or 4MWord x 8Bit FEDR27T3202L-02-02 Issue Date: Jul. 11, 2005 P2ROM FEATURES ? 2,097,152-word 16-bit / 4,194,304-word 8-bit electrically switchable configuration ? Access time 2.7 V to 3.6 V power supply 90 ns MAX 3.0 V to 3.6 V power supply 80 ns MAX ? Operating current 20 mA MAX(5MHz) ? Standby current 10 킕 MAX ? Input/Output TTL compatible ? Three-state output PACKAGES ? MR27T3202L-xxxMA 44-pin plastic SOP (SOP44-P-600-1.27-K) ? MR27T3202L-xxxTN 48-pin plastic TSOP (TSOP I 48-P-1220-0.50-1K) PIN CONFIGURATION (TOP VIEW) NC 1 44 A20 A18 A17 2 43 A19 3 42 A8 A7 A6 4 41 A9 5 40 A10 A5 A4 6 39 A11 7 38 A12 A3 A2 8 37 A13 9 36 A14 A1 10 A0 11 35 A15 34 A16 CE# 12 VSS 13 33 BYTE# OE# 14 D0 15 31 D15/A1 32 VSS 30 D7 D8 16 D1 17 29 D14 D9 18 D2 19 27 D13 D10 20 D3 21 D11 22 25 D12 28 D6 26 D5 24 D4 23 VCC 44SOP P2ROM ADVANCED TECHNOLOGY P2ROM stands for Production Programmed ROM. This exclusive Oki technology utilizes factory test equipment for programming the customers code into the P2ROM prior to final production testing. Advancements in this technology allows production costs to be equivalent to MASKROM and has many advantages and added benefits over the other non-volatile technologies, which include the following; · Short lead time, since the P2ROM is programmed at the final stage of the production process, a large P2ROM inventory "bank system" of un-programmed packaged products are maintained to provide an aggressive lead-time and minimize liability as a custom product. · No mask charge, since P2ROMs do not utilize a custom mask for storing customer code, no mask charges apply. · No additional programming charge, unlike Flash and OTP that require additional programming and handling costs, the P2ROM already has the code loaded at the factory with minimal effect on the production throughput. The cost is included in the unit price. · Custom Marking is available at no additional charge. · Pin Compatible with Mask ROM and some FLASH products. A15 1 48 A16 A14 A13 2 47 BYTE# 3 46 VSS A12 A11 4 45 D15/A1 5 44 D7 A10 A9 6 43 D14 7 42 D6 A8 A19 8 41 D13 9 40 D5 A20 10 NC 11 NC 12 NC 13 NC 14 NC 15 A18 16 A17 17 A7 18 A6 19 A5 20 A4 21 A3 22 A2 23 A1 24 39 D12 38 D4 37 VCC 36 D11 35 D3 34 D10 33 D2 32 D9 31 D1 30 D8 29 D0 28 OE# 27 VSS 26 CE# 25 A0 48TSOP(Type-I) 1/10 FEDR27T3202L-02-02 OKI Semiconductor BLOCK DIAGRAM MR27T3202L / P2ROM A1 ? 8/? 16 Switch A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 CE# OE# CE OE BYTE# Memory Cell Matrix 4M ? 16-Bit or 8M ? 8-Bit Multiplexer Output Buffer D0 D2 D1 PIN DESCRIPTIONS Pin name D15 / A1 A0 to A20 D0 to D14 CE# OE# BYTE# VCC VSS NC D4 D3 D6 D5 D8 D7 D10 D9 D12 D11 D14 D13 D15 In 8-bit output mode, these pins are placed in a high-Z state and pin D15 functions as the A-1 address pin. Functions Data output / Address input Address inputs Data outputs Chip enable input Output enable input Word / Byte select input Power supply voltage Ground No connect 2/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM FUNCTION TABLE Mode Read (16-Bit) Read (8-Bit) CE# L L OE# L L Output disable L H Standby H BYTE# H L H L H L VCC 2.7 V to 3.6 V D0 to D7 DOUT D8 to D14 DOUT HiZ D15/A1 L/H HiZ HiZ : Dont Care (H or L) ABSOLUTE MAXIMUM RATINGS Parameter Operating temperature under bias Storage temperature Input voltage Output voltage Power supply voltage Power dissipation per package Output short circuit current Symbol Ta Tstg VI VO VCC PD IOS Condition relative to V SS Ta = 25캜 Value 0 to 70 55 to 125 0.5 to VCC+0.5 0.5 to V CC+0.5 0.5 to 5 1.0 10 Unit 캜 °C V V V W mA RECOMMENDED OPERATING CONDITIONS (Ta = 0 to 70캜 ) Parameter VCC power supply voltage Input H level Input L level Symbol VCC VIH VIL Condition VCC = 2.7 to 3.6 V Min. 2.7 2.2 0.5 Typ. Max. 3.6 VCC+0.5 0.6 Unit V V V Voltage is relative to VSS. : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. : -1.5V(Min.) when pulse width of undershoot is less than 10ns. PIN CAPACITANCE (VCC = 3.0 V, Ta = 25캜 , f = 1 MHz) Parameter Input BYTE# Output Symbol CIN1 CIN2 COUT Condition VI = 0 V VO = 0 V Min. Typ. Max. 10 200 10 Unit pF 3/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM ELECTRICAL CHARACTERISTICS DC Characteristics (VCC = 2.7 V to 3.6 V, Ta = 0 to 70캜 ) Parameter Input leakage current Output leakage current VCC power supply current (Standby) VCC power supply current (Read) Input H level Input L level Output H level Output L level Symbol ILI ILO ICCSC ICCST ICCA VIH VIL VOH VOL Condition VI = 0 to VCC VO = 0 to VCC CE# = VCC CE# = VIH CE# = VIL, OE# = VIH f=5MHz IOH = 1 mA IOL = 2 mA Min. Typ. Max. 10 10 10 1 Unit A A A mA 20 mA 2.2 0.5 2.4 VCC+0.5 0.6 0.4 V V V V Voltage is relative to VSS. : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. : -1.5V(Min.) when pulse width of undershoot is less than 10ns. 4/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM AC Characteristics (VCC = 2.7 V to 3.6 V, Ta = 0 to 70캜 ) Parameter Address cycle time Address access time CE# access time OE# access time Output disable time Output hold time Symbol tC tACC tCE tOE tCHZ tOHZ tOH Condition CE# = OE# = VIL OE# = VIL CE# = VIL OE# = VIL CE# = VIL CE# = OE# = VIL Min. 90 0 0 0 Symbol tC tACC tCE tOE tCHZ tOHZ tOH Condition CE# = OE# = VIL OE# = VIL CE# = VIL OE# = VIL CE# = VIL CE# = OE# = VIL Min. 80 0 0 0 Max. 90 90 30 30 25 Unit ns ns ns ns ns ns ns (VCC = 3.0 V to 3.6 V, Ta = 0 to 70캜 ) Parameter Address cycle time Address access time CE# access time OE# access time Output disable time Output hold time Measurement conditions Input signal level------------------------------------Input timing reference level ----------------------Output load ------------------------------------------Output timing reference level--------------------Output load Max. 80 80 30 20 20 Unit ns ns ns ns ns ns ns 0 V/3 V 1/2Vcc 50 pF 1/2Vcc Output 50 pF (Including scope and jig) 5/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM TIMING CHART (READ CYCLE) 16-Bit Read Mode (BYTE# = VIH) tC tC A0 to A20 tOH tACC tCE CE# tOE tCHZ tOH OE# tOHZ tACC D0 to D15 Valid Data Valid Data Hi-Z Hi-Z 8-Bit Read Mode (BYTE# = VIL) tC tC A-1 to A20 tACC tCE tOH CE# tOE tCHZ tOH OE# tOHZ tACC D0 to D7 Hi-Z Valid Data Valid Data Hi-Z 6/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM PACKAGE DIMENSIONS (Unit: mm) SOP44-P-600-1.27-K 5 Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised Epoxy resin 42 alloy Solder plating ( 5탆 ) 2.10 TYP. 4/Dec. 5, 1996 Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Okis responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 7/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM (Unit: mm) 5 Notes for Mounting the Surface Mount Type Package The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Okis responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 8/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM REVISION HISTORY Document No. Page Date Previous Edition Current Edition FEDR27T3202L-02-01 Mar. 1, 2005 FEDR27T3202L-02-02 Jul. 11, 2005 1 1, 7, 8 Description Final edition 1 Add MR27T3202L-xxxMA 9/10 FEDR27T3202L-02-02 OKI Semiconductor MR27T3202L / P2ROM NOTICE 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. 3. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. Neither indemnity against nor license of a third partys industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third partys right which may result from the use thereof. 6. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. 8. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Copyright 2005 Oki Electric Industry Co., Ltd. 10/10