MSP Vishay Dale Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile FEATURES • 0.195" [4.95mm] "A" or 0.350" [8.89mm] "C" maximum seated height • Highly stable thick film • Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C • Rugged, molded case construction • Reduces total assembly costs • Compatible with automatic insertion equipment and reduces PC board space • Wide resistance range • Available in tube pack or side-by-side pack STANDARD ELECTRICAL SPECIFICATIONS MODEL/ SCHEMATIC PROFILE RESISTOR POWER RATING Max. @ 70°C* W RESISTANCE RANGE Ω ±% MSP01 A C 0.20 0.25 10 - 2.2M 2 Standard (1, 5, 10, 20)** ± 100 ± 50ppm/°C 100 MSP03 A C 0.30 0.40 10 - 2.2M 2 Standard (1, 5, 10, 20)** ± 100 ± 50ppm/°C 100 10 - 2.2M ± 2 Standard (± 5%)** ± 100 ± 150ppm/°C 100 MSP05 A 0.20 C 0.25 * Tighter tracking available ** Tolerances in brackets available on request STANDARD TOLERANCE TEMPERATURE TCR COEFFICIENT TRACKING* (- 55°C to + 125°C) (- 55°C to + 125°C) ppm/°C ppm/°C OPERATING VOLTAGE Max. VDC TECHNICAL SPECIFICATIONS PARAMETER UNIT MSP SERIES Package Power Rating See Derating Curves (Maximum at + 25°C and + 70°C Voltage Coefficient of Resistance Veff < 50ppm typical VAC 200 Isolation Resistance (03 Schematic) Ω > 100M Operating Temperature Range °C - 55 to + 125 Storage Temperature Range °C - 55 to + 150 Dielectric Strength MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215. Solderability: Per MIL-STD-202, Method 208E, RMA flux. Body: Molded epoxy. Terminals: Copper alloy, tin-lead plated. Weight: MSP06A = 0.4 gram MSP08A = 0.5 gram MSP09A = .55 gram MSP10A = 0.6 gram www.vishay.com 38 MSP06C = 0.7 gram MSP08C = 0.9 gram MSP10C = 1.1 gram For Technical Questions, contact: [email protected] Document Number: 31510 Revision 25-Oct-00 MSP Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP DIMENSIONS in inches [millimeters] A Max. 0.090 [2.29] Max. PIN #1 0.015 [0.381] Min. 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative D Max. 0.016 ± 0.003 [0.406 ± 0.076] B C Equals Spaces 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254] 0.012 ± 0.003 [0.305 ± 0.076] MODEL A (Max.) B C MSP06 0.590 [14.99] 0.500 [12.70] 5 MSP08 0.790 [20.07] 0.700 [17.78] 7 MSP10 0.990 [25.15] 0.900 [22.86] 9 MSP09 0.890 [22.61] 0.800 [20.32] 8 D (Max.) MSPxxA = 0.195 [4.95] MSPxxC = 0.350 [8.89] 0.195 [4.95] ONLY ORDERING INFORMATION 01 Schematic MSP MODEL 08 NUMBER OF PINS A PACKAGE CODE 01 SCHEMATIC 101 RESISTANCE VALUE A =0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing C =0.350" [8.89mm] Height 0.100" [2.54mm] Lead Spacing First 2 digits (3 for "F" tolerance) are significant figures. Last digit specifies number of zeros to follow. G TOLERANCE F = ± 1% G= ± 2% J = ± 5% 03 Schematic MSP MODEL 06 NUMBER OF PINS A PACKAGE CODE 03 SCHEMATIC 102 RESISTANCE VALUE A =0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing C =0.350" [8.89mm] Height 0.100" [2.54mm] Lead Spacing G TOLERANCE First 2 digits (3 for "F" tolerance) are significant figures. Last digit specifies number of zeros to follow. F = ± 1% G= ± 2% J = ± 5% 331 RESISTANCE VALUE R2 G TOLERANCE 05 Schematic MSP MODEL 06 NUMBER OF PINS A PACKAGE CODE A =0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing C =0.350" [8.89mm] Height 0.100" [2.54mm] Lead Spacing EXAMPLE: MSP08A-01-101G = A molded single-inline thick film resistor network with 8 pins on 0.100" [2.54mm] centers, 0.195" [4.95mm] maximum seated height, 01 Schematic, resistance value of 100 ohm and a tolerance of ± 2%. Document Number: 31510 Revision 25-Oct-00 05 SCHEMATIC 221 RESISTANCE VALUE R1 First two digits are significant figures. Last digit specifies the number of zeros to follow. EXAMPLE: MSP06A-03-102G = A molded single-inline thick film resistor network with 6 pins on 0.100" [2.54mm] centers, 0.195" [4.95mm] maximum seated height, 03 Schematic, resistance value of 1000 ohm and a tolerance of ± 2%. G= ± 2% J = ± 5% EXAMPLE: MSP06A-05-221/331G = A molded single-inline thick film resistor network with 6 pins on 0.100" [2.54mm] centers, 0.195" [4.95mm] maximum seated height, 05 Schematic with resistances of R1 = 220 ohm and R2 = 330 ohm and a tolerance ± 2%. For Technical Questions, contact: [email protected] www.vishay.com 39 MSP Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP CIRCUIT APPLICATIONS 5, 7, 8* or 9 resistors with one pin common 01 Schematic 1 The MSPxxx-01 circuit contains 5, 7, 8* or 9 nominally equal resistors, each connected between a common pin (Pin No. 1) and a discrete PC board pin. Commonly used in the following applications: • "Wired OR" Pull-up • MOS/ROM Pull-up/Pull-down • Power Gate Pull-up • Open Collector Pull-up • TTL Input Pull-down • TTL Unused Gate Pull-up 2 3 n-1 n * Available in "A" Profile only Standard E-24 resistance values stocked. Consult factory. 03 Schematic 3, 4 or 5 isolated resistors The MSPxxx-03 circuit contains 3, 4 or 5 resistors of nominally equal value in a compact package. Each resistor is connected to two discrete PC pins. 1 2 3 4 n-1 n Standard E-24 resistance values stocked. Consult factory. Pulse squaring and TTL dual-line terminators 05 Schematic The MSPxxx-05 circuits contain 4, 6, 7* or 8 series pair of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. R2 The 05 circuits are designed for TTL dual-line termination and pulse squaring. R1 * Available in "A" Profile only Many dual terminator resistance values stocked. Consult factory. 1 www.vishay.com 40 2 3 n-1 n For Technical Questions, contact: [email protected] Document Number: 31510 Revision 25-Oct-00 MSP Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP 3.00 1.50 1.15 "C" Profile Power Rating (Watts) Power Rating (Watts) "A" Profile MSP10A Package MSP08A Package 3.00 MSP10C Package 2.50 MSP08C Package 2.00 MSP06A Package MSP06C Package 1.50 .45 Single Resistor 03 .30 Single Resistor 03 .60 01 and 05 01 and 05 .38 - 50 Derating + 25 + 70 + 125 Ambient Temperature °C "A" PROFILE + 70°C PACKAGE RATINGS MSP10A 1.25 watts MSP09A 1.12 watts MSP08A 1.00 watts MSP06A 0.75 watts - 50 + 150 Derating + 25 + 70 + 125 + 150 Ambient Temperature °C "C" PROFILE + 70°C PACKAGE RATINGS MSP10C 1.60 watts MSP08C 1.30 watts MSP06C 1.00 watts Higher power ratings available. Contact factory. PERFORMANCE MAX. ∆R (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours ± 4 hours at + 25°C ambient temperature ± 0.50% ∆R Thermal Shock 5 cycles between - 65°C and + 125°C ± 0.50% ∆R Short Time Overload 2.5 x rated working voltage 5 seconds ± 0.25% ∆R Low Temperature Operation 45 minutes at full rated working voltage at - 65°C ± 0.25% ∆R Moisture Resistance 240 hours with humidity ranging from 80% RH to 98% RH ± 0.50% ∆R Resistance to Soldering Heat Leads immersed in + 260°C solder to within 1/16" of device body for 10 seconds ± 0.25% ∆R Shock Total of 18 shocks at 100 G's ± 0.25% ∆R Vibration 12 hours at maximum of 20 G's between 10 and 2,000 HZ ± 0.25% ∆R Load Life 1000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1,000 hour period. Derated according to the curve. ± 1.00% ∆R Terminal Strength 4.5 pound pull for 30 seconds ± 0.25% ∆R Insulation Resistance 10,000 Megohm (minimum) Dielectric Withstanding Voltage Document Number: 31510 Revision 25-Oct-00 — — For Technical Questions, contact: [email protected] www.vishay.com 41