Revised June 2003 NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer General Description Features The NC7SZ157 is a single, high performance, 2 to 1 CMOS non-inverting multiplexer from Fairchild’s Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range. ■ Space saving SC70-6 lead surface mount package ■ Ultra Small MicroPak leadless package ■ Ultra High Speed ■ Broad VCC operating range: 1.65V to 5.5V ■ Power down high impedance input/output ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number Package Number Package Top Mark NC7SZ157P6X MAA06A ZF7 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7SZ157L6X MAC06A B9 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Logic Symbol Supplied As Connection Diagram IEEE/IEC (Top View) Function Table Inputs Output Pin One Orientation Diagram Z = (I0)•(S)+(I1)•(S) S I1 I0 L X L L L X H H H L X L AAA = Product Code Top Mark - see ordering code H H X H Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). H = HIGH Logic Level L = LOW Logic Level Pad Assignments for MicroPak Pin Descriptions Pin Name Description I0, I1 Data Inputs S Control Input Z Output (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. © 2003 Fairchild Semiconductor Corporation DS500359 www.fairchildsemi.com NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer April 2000 NC7SZ157 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) −0.5V to +7.0V DC Input Voltage (VIN) −0.5V to +7.0V DC Output Voltage (VOUT) −0.5V to +7.0V Recommended Operating Conditions Supply Voltage Operating (VCC) DC Input Diode Current (IIK) @ VIN ≤ 0.5V DC VCC or Ground Current (ICC / IGND) ±50 mA Input Rise and Fall Time (tr, tf) −65°C to +150°C Storage Temperature Range (TSTG) 150°C Max Junction Temperature under Bias (TJ) 0V to VCC −40°C to +85°C Operating Temperature (TA) −50 mA ±50 mA 0V to 5.5V Output Voltage (VOUT) DC Output Diode Current (IOK) @ VIN ≤ −0.5V 1.5V to 5.5V Input Voltage (VIN) −50 mA DC Output Source/Sink Current (IOUT) 1.65V to 5.5V Supply Voltage Data Retention (VCC) VCC @ 1.8V ± 0.15V, 2.5V ± 0.2V 0 ns/V to 20 ns/V VCC @ 3.3V ± 0.3V 0 ns/V to 10 ns/V VCC @ 5.0V ± 0.5V 0 ns/V to 5 ns/V Thermal Resistance (θJA) Lead Temperature (TL) 350°C/W SC70-6 260°C (Soldering, 10 seconds) Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Power Dissipation (PD) @+85°C SC70-6 180 mW DC Electrical Characteristics Symbol Parameter (V) VIH HIGH Level Input Voltage VOH VOL LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com Min Typ TA = −40°C to +85°C Max 1.65-1.95 0.75 VCC 2.3−5.5 VIL TA = +25°C VCC Min 0.75 VCC 0.7VCC 1.65-1.95 0.25 VCC 0.25 VCC 2.3-5.5 0.3 VCC 0.3 VCC 1.55 1.65 1.55 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 3.0 2.4 2.80 2.4 3.0 2.3 3.68 2.3 4.5 3.9 4.20 Conditions V 0.7VCC 1.65 Units Max V V VIN = VIL or = VIH IOH = −100 µA IOH = −4 mA VIN = VIL V or = VIH IOH = −8 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA 3.8 1.65 0.0 0.10 0.10 2.3 0.0 0.10 0.10 3.0 0.0 0.10 0.10 4.5 0.0 0.10 0.10 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 3.0 0.15 0.4 0.4 3.0 0.22 0.55 0.55 4.5 0.22 V VIN = VIL or = VIH IOL = 100 µA IOL = 4 mA VIN = VIL V or = VIH IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 0.55 0.55 0−5.5 ±0.1 ±1 µA 0.0 1 10 µA VIN or VOUT = 5.5V 10 µA VIN = 5.5V, GND 1.65−5.5 2 VIN = 5.5V, GND Symbol tPLH Parameter Propagation Delay S to Z tPHL TA = +25°C VCC TA = −40°C to +85°C (V) Min Typ Max Min Max 1.8 ± 0.15 2.5 6.0 11.5 2.5 12 2.5 ± 0.2 1.2 3.5 6.1 1.2 6.5 3.3 ± 0.3 0.8 2.6 4.1 0.8 4.5 5.0 ± 0.5 0.5 1.9 3.2 0.5 3.5 tPLH Propagation Delay In to Z 1.8 ± 0.15 2.5 5.9 10 2.5 10.5 tPHL 5.0 ± 0.5 1.2 3.5 5.8 1.2 6.1 3.3 ± 0.3 0.8 2.6 3.9 0.8 4.2 tPLH Propagation Delay S to Z tPHL tPLH Propagation Delay In to Z tPHL 5.0 ± 0.5 0.5 1.9 3.1 0.5 3.3 3.3 ± 0.3 1.2 3.2 4.8 1.2 5.2 5.0 ± 0.5 0.8 2.4 3.8 0.8 4.1 3.3 ± 0.3 1.2 3.2 4.6 1.2 5.0 5.0 ± 0.5 0.8 2.4 3.7 0.8 4.0 CIN Input Capacitance 0 2 CPD Power Dissipation 3.3 14 Capacitance 5.0 17 Units ns ns ns ns Conditions CL = 15 pF RL = 1 MΩ CL = 15pF RL = 1 MΩ CL = 50 pF RL = 500Ω CL = 50 pF Fig. No. Figures 1, 3 Figures 1, 3 Figures 1, 3 RL = 500Ω Figures 1, 3 (Note 2) Figure 2 pF pF Note 2: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2) CPD is related to ICCD dynamic operatic current by the expression: ICCD = (C PD)(VCC)(fin) + (ICCstatic). AC Loading and Waveforms CL includes load and stray Capacitance Input PRR = 1.0 MHz, tW = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveforms PRR = Variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZ157 AC Electrical Characteristics NC7SZ157 Tape and Reel Specification TAPE FORMAT For SC70 Package Designator Tape Number Cavity Section Cavities Status Status 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Leader (Start End) P6X Carrier Trailer (Hub End) Cover Tape TAPE DIMENSIONS inches (millimeters) Package SC70-6 Tape Size 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) DIM F DIM Ko 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) 4 (1.35 ± 0.10) DIM P1 DIM W 0.157 0.315 ± 0.004 (4) (8 ± 0.1) TAPE FORMAT for MicroPak Package (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) 5 www.fairchildsemi.com NC7SZ157 Tape and Reel Specification NC7SZ157 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 6 NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com