PANJIT 2N7002K

2N7002K-AU
60V N-Channel Enhancement Mode MOSFET - ESD Protected
SOT-23
FEATURES
Unit:inch(mm)
• RDS(ON), VGS@10V,IDS@500mA=3Ω
• RDS(ON), VGS@4.5V,IDS@200mA=4Ω
• Advanced Trench Process Technology
0.120(3.04)
0.110(2.80)
• High Density Cell Design For Ultra Low On-Resistance
• Very Low Leakage Current In Off Condition
• Specially Designed for Battery Operated Systems, Solid-State Relays
Drivers : Relays, Displays, Lamps, Solenoids, Memories, etc.
0.056(1.40)
• ESD Protected 2KV HBM
0.047(1.20)
• Acqire quality system certificate : TS16949
• AEC-Q101 qualified
0.008(0.20)
0.079(2.00)
0.003(0.08)
0.070(1.80)
• Lead free in comply with EU RoHS 2002/95/EC directives.
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
• Case: SOT-23 Package
0.004(0.10)
0.044(1.10)
0.000(0.00)
0.035(0.90)
0.020(0.50)
• Terminals : Solderable per MIL-STD-750,Method 2026
0.013(0.35)
• Apporx. Weight: 0.0003 ounces, 0.0084 grams
• Marking : K72
Maximum RATINGS and Thermal Characteristics (TA=25OC unless otherwise noted )
PA RA M E TE R
S ym b o l
Limit
Uni ts
D ra i n- S o urc e Vo lta g e
V DS
60
V
G a t e -S o ur c e Vo lt a g e
V GS
+20
V
C o nt i nuo us D ra i n C ur re nt
ID
300
mA
P uls e d D ra i n C urre nt
ID M
2000
mA
PD
350
210
mW
T J ,T S TG
-5 5 to + 1 5 0
RθJA
357
1)
M a xi mum P o we r D i s s i p a t i o n
O p e ra t i ng J unc t i o n a nd S t o ra g e Te mp e r a tur e Ra ng e
Junction-to Ambient Thermal Resistance(PCB mounted)2
TA = 2 5 OC
TA = 7 5 OC
O
O
C
C /W
Note: 1. Maximum DC current limited by the package
2. Surface mounted on FR4 board, t < 5 sec
PAN JIT RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE
October 29,2010-REV.02
PAGE . 1
2N7002K-AU
ELECTRICALCHARACTERISTICS
P a ra me te r
S ymb o l
Te s t C o nd i ti o n
Mi n.
Typ .
Ma x.
Uni ts
D ra i n-S o urc e B re a k d o wn Vo lta g e
B V DSS
V G S = 0 V , ID = 1 0 μ A
60
-
-
V
Ga te Thre s ho ld Vo lta g e
V G S ( th)
V D S = V GS , I D = 2 5 0 μ A
1
-
2 .5
V
D ra i n-S o urc e On-S t a t e Re s i s ta nc e
R D S ( o n)
VGS=4.5V , I D=200mA
-
-
4 .0
D ra i n-S o urc e On-S t a t e Re s i s ta nc e
R D S ( o n)
VGS=10V , I D=500mA
-
-
3.0
Ze ro Ga t e Vo lt a g e D ra i n C ur re nt
ID S S
VDS=60V , VGS=0V
-
-
1
μA
Gate Body Leakage
I GS S
V GS= + 2 0 V , V D S= 0 V
-
-
+10
μA
Forward Transconductance
g fS
V D S = 1 5 V , ID = 2 5 0 mA
100
-
-
mS
To ta l Ga te C ha rg e
Qg
V D S = 1 5 V, ID = 2 0 0 m A
VGS=5V
-
-
0 .8
nC
Tur n-On Ti me
t on
-
-
20
Tur n-Off Ti me
t off
-
-
40
Inp ut C a p a c i ta nc e
C i ss
-
-
35
Out p ut C a p a c i t a nc e
C oss
-
-
10
Re ve rs e Tra ns fe r C a p a c i ta nc e
C rss
-
-
5
S t a ti c
Ω
Dynamic
VDD=30V , RL=150Ω
ID=200mA , VGEN=10V
RG=10Ω
V D S= 2 5 V , V GS= 0 V
f= 1 .0 M H Z
ns
pF
S o ur c e -D ra i n D i o d e
D i o d e F o rwa rd Vo lta g e
V SD
IS=200mA , VGS=0V
-
0.82
1.3
V
C o nti nuo us D i o d e F o rwa r d C urr e nt
IS
-
-
-
300
mA
P uls e D i o d e F o r wa rd C ur re nt
IS M
-
-
-
2000
mA
VDD
Switching
Test Circuit
VIN
VDD
Gate Charge
Test Circuit
RL
VGS
RL
VOUT
RG
1mA
RG
October 29,2010-REV.02
PAGE . 2
2N7002K-AU
O
Typical Characteristics Curves (TA=25 C,unless otherwise noted)
1.2
V GS= 6.0~10V
5.0V
1
0.8
4.0V
0.6
0.4
0.2
3.0V
0
0
1
2
3
4
5
ID - Drain Source Current (A)
ID - Drain-to-Source Current (A)
1.2
VDS =10V
1
0.8
0.6
0.4
0.2
25oC
0
0
VDS - Drain-to-Source Voltage (V)
3
4
5
6
FIG.2- Transfer Characteristic
5
RDS(ON) - On-Resistance ( W )
5
RDS(ON) - On-Resistance ( W )
2
VGS - Gate-to-Source Voltage (V)
Fig. 1-TYPICAL
FORWARD
CHARACTERISTIC
FIG.1- Output
Characteristic
4
3
V GS = 4.5V
2
1
V GS=10V
0
4
3
ID =500mA
2
ID =200mA
1
0
0
0.2
0.4
0.6
0.8
1
FIG.3- On Resistance vs Drain Current
1.8
1.6
2
3
4
5
6
7
8
9
10
V GS - Gate-to-Source Voltage (V)
ID - Drain Current (A)
RDS(ON) - On-Resistance(Normalized)
1
FIG.4- On Resistance vs Gate to Source Voltage
VGS =10V
ID =500mA
1.4
1.2
1
0.8
0.6
-50
-25
0
25
50
75
100
125
150
o
TJ - Junction Temperature ( C)
FIG.5- On Resistance vs Junction Temperature
October 29,2010-REV.02
PAGE . 3
2N7002K-AU
V GS - Gate-to-Source Voltage (V)
10
Vgs
Qg
Qsw
Vgs(th)
6
4
2
0
Qg(th)
Qgs
0
Qg
Qgd
VDS=10V
ID =250mA
8
0.2
1
0.9
0.8
0
25
50
75
100
125
88
BVDSS - Breakdown Voltage (V)
Vth - G-S Th r esh o l d Vo l tag e (NORMA L IZED)
1.1
-25
86
84
82
80
78
76
74
72
-50
150
-25
C - Capacitance (pF)
IS - Source Current (A)
75
100
-55oC
25oC
0.6
0.8
1
1.4
150
50
40
30
Ciss
20
Coss
10
1.2
125
f = 1MHz
V GS = 0V
60
0.1
1.6
VSD - Source-to-Drain Voltage (V)
Fig.10 - Source-Drain Diode Forward Voltage
October 29,2010-REV.02
50
70
1
0.4
25
Fig.9 - Breakdown Voltage vs Junction Temperature
VGS = 0V
0.01
0.2
0
TJ - Junction Temperature ( o C)
Fig.8 - Threshold Voltage vs Temperature
TJ = 125oC
1
ID = 250 m A
TJ - Junction Temperature ( C)
10
0.8
Fig.7 - Gate Charge
ID =250 m A
0.7
-50
0.6
Qg - Gate Charge (nC)
Fig.6 - Gate Charge Waveform
1.2
0.4
Crss
0
0
5
10
15
20
25
VDS - Drain-to-Source Voltage (V)
Fig.11 - Capacitance vs Drain to Source Voltage
PAGE . 4
2N7002K-AU
MOUNTING PAD LAYOUT
SOT-23
0.035 MIN.
(0.90) MIN.
Unit:inch(mm)
0.078
(2.00)
0.037
(0.95)
0.043
(1.10)
0.031 MIN.
(0.80) MIN.
0.043
(1.10)
0.106
(2.70)
ORDER INFORMATION
• Packing information
T/R - 12K per 13" plastic Reel
T/R - 3K per 7” plastic Reel
October 29,2010-REV.02
PAGE . 5
2N7002K-AU
Part No_packing code_Version
2N7002K-AU_R1_000A1
2N7002K-AU_R2_000A1
For example :
RB500V-40_R2_00001
Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Part No.
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
October 29,2010-REV.02
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 6
2N7002K-AU
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•
The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
• Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
October 29,2010-REV.02
PAGE . 7