531_NLCV25 (1/2) Inductors NLCV Series NLCV25 Type For Power Line SMD FEATURES • Provides high Q while using 252018 size winding construction. • Environmentally friendly due to use of recyclable plastic (thermoplastic). • Logo omitted to simplify production. • Maintains interchangeability with earlier NL product series. • NLV series are E-6 products, while NLCV and NLFV series are E-3 products. PRODUCT IDENTIFICATION NLV 25 T- 2R2 J (1) (2) (3) (4) (5) (1) Series name (2) Dimensions LxWxT 252018 2.5×2.0×1.8mm APPLICATIONS PCs, hard disk drives, and other types of electronics (3) Packaging style SPECIFICATIONS (4) Inductance value Operating temperature range –20 to +85°C –20 to +85°C –20 to +85°C Type NLV25 NLCV25 NLFV25 Storage temperature range[Unit of products] –40 to +85°C –40 to +85°C –40 to +85°C RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING T Taping (reel) 1R0 220 1µH 22µH (5) Inductance tolerance J K M ±5% ±10% ±20% PACKAGING STYLE AND QUANTITIES 10s max. 230°C 200°C Natural cooling 150°C Packaging style Taping 30s max. Type NLV25T NLCV25T NLFV25T Quantity 2000 pieces/reel 2000 pieces/reel 2000 pieces/reel 100°C Preheating:120s Time(s) FLOW SOLDERING 10s max. 260°C Natural cooling PRECAUTIONS • The exterior of this product can melt since due to thermoplastic construction. During mechanical contact while at the plastic softening temperature, deformation can occur at the contact location. Therefore caution is required when utilizing a soldering iron during the soldering operation. FLUX AND CLEANING Rosin-based flux is recommended. Cleaning Conditions 150°C 100°C Preheating:120s Solvent Time(s) Time Chlorine-based solvent (Do not use acid or alkali solvents.) 2min max. IRON SOLDERING Perform soldering at 250°C on 30W max. within 5 seconds. VAPOR-PHASING 10s max. 220°C Natural cooling 215°C 150°C 30s max. 100°C Preheating:120s Time(s) Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice. 531_NLCV25 (2/2) Inductors NLCV Series NLCV25 Type For Power Line SMD SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN Inductor Solder land pattern 1.8±0.1 0.5 1.5 2±0.1 2.5±0.2 Terminal electrode (0.4) 1.0 1.5 1.0 1.4±0.1 Dimensions in mm Weight:25mg ELECTRICAL CHARACTERISTICS Inductance(µH) Inductance tolerance Q typ. Test frequency L,Q (MHz) 1 2.2 4.7 10 22 ±20% ±20% ±20% ±10% ±10% 20 20 20 30 30 7.96 7.96 7.96 2.52 2.52 Self-resonant frequency (MHz)min. 200 95 43 32 18 DC resistance (Ω)±30% Rated current (mA)max. Part No. 0.34 0.5 0.8 1.69 2.8 475 390 285 210 160 NLCV25T-1R0M NLCV25T-2R2M NLCV25T-4R7M NLCV25T-100K NLCV25T-220K • Test equipment L, Q: HP4194A IMPEDANCE/GAIN PHASE ANALYZER+HP16085A+HP16093 B+TF-1 SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS 100 IMPEDANCE vs. FREQUENCY CHARACTERISTICS 100 30 22µH 30 22µH Impedance(kΩ) Inductance(µH) 10µH 10µH 10 4.7µH 3 2.2µH 2.2µH 1µH 3 1µH 1 1 0.3 0.1 4.7µH 10 0.3 10 30 1000 100 300 DC current(mA) 3000 10000 0.1 1 3 100 10 30 Frequency(MHz) 300 1000 531_NLCV25 000120 Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.