OCO-M36CES Through hole OCXO Sine wave Features Applications: CDMA, networking, instrumentation High frequency stability vs. temperature (up to ±7.5 x 10-9) Wide operating temperature range: -40 up to +85 °C Specification Parameter OCO-M36CES5 Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability Output waveform Output load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external potentiometer (20 kΩ) Reference voltage output (Vref) Phase noise @ 20 MHz carrier frequency Harmonics < -30 dBc Operating temperature range Storage temperature range Case height (H) OCO-M36CES12 10.0000 ~ 40.0000 MHz 10.00, 12.80, 13.00, 15.36, 16.00, 16.384, 20.00, 26.00, 30.72, 32.00, 32.768 & 38.40 MHz ±2.0 x 10-8 over -40 ~ +85 °C ±1.0 x 10-8 over -20 ~ +70 °C ±7.5 x 10-9 over -10 ~ +60 °C -9 ±5 x 10 ±5 % -9 ±5 % ±5 x 10 ±3 x 10-8 1st year -11 < 2 x 10 Allan deviation per 1 s sine wave > 300 mV (rms) 50 Ω ±5 % +5.0 V 5 % +12 V 5 % < 200 mA < 80 mA -7 < 3 min < 1 x 10 @ +25 °C > ±5 x 10-7 positive slope 0 ~ +4.5 V 0 ~ +5.0 V +4.5 V +5.0 V < -105 dBc/Hz @ 10 Hz < -135 dBc/Hz @ 100 Hz < -145 dBc/Hz @ 1 kHz < -150 dBc/Hz @ 10 kHz -10 ~ +60 °C, -20 ~ +70 °C, -40 ~ +70 °C -55 ~ +85 °C or -40 ~ +85 °C 16.0 mm Environmental test vibration shock acceleration: 5 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis 100 g, half-sine, 3 ms (3 shocks each, 6 directions) Pin function #1 #2 #3 #4 #5 Vc Vref Vdc RF output GND Circuit diagram CBP = 0.01 mF Zout = 10 k // 15 pF 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 12 May. 10