Ultraviolet (UV) Metal Can LED OUE8A Series Features: • • • • • • Peak Wavelengths from 380 nm to 425 nm Uniform Optical Light Pattern High Pulse Current Hermetic TO-46 Metal Can Package RoHs Compliant—No Mercury ESD Protected The OUE8A Series offers an energy-efficient hermetic TO-46 metal can packaged UV LED source providing a uniform optical light pattern, high current pulse capability, ESD protection and a long operating lifespan. Devices have a 18o typical emission angle with peak wavelengths from 375 nm to 425 nm. In order to meet critical wavelength requirements of the industry, the OUE8A Series is divided into groups each with a total wavelength range of only 5 nm. Each wavelength range is subdivided into optical power output ranges from a minimum of 1.8 mW to over 17.0 mW based on power out specifications listed below. Applications: • • • • • Adhesive-Ink Photo Catalyst Curing Currency / Passport Validation Spectroscopy Forensic Medical Part Number Emission Angle Peak Wavelength (nm) IF = 100 mA Optical Power Output (mW) IF = 100 mA Range Minimum Maximum OUE8A380Y1 375 to 380 1.8 8.1 OUE8A385Y1 380 to 385 1.8 8.1 OUE8A390Y1 385 to 390 1.8 8.1 OUE8A395Y1 390 to 395 3.1 9.8 395 to 400 5.8 13.4 OUE8A405Y1 400 to 405 5.8 13.4 OUE8A410Y1 405 to 410 5.8 13.4 OUE8A415Y1 410 to 415 7.3 15.4 OUE8A420Y1 415 to 420 7.3 15.4 OUE8A425Y1 420 to 425 7.3 15.4 OUE8A400Y1 18 Part Number Guide OUE8 A XXX Y 1 Optek UV TO-46 LED Series Sequence Numbers (A→Z) ESD Level ≥ 8,000 V RoHs Packaging 1 – Tray Pack Power Output (mW) - A through J Wavelength (nm) Identifier Warnings and Handling Instructions UV-LEDs emit invisible ultraviolet radiation when in operation, which may be harmful to eyes or skin, even for brief periods. Do NOT look directly into the UV-LED during operation. Be sure that you and all persons in the vicinity wear adequate “UV” Safety protection for eyes and skin. If you incorporate a UV-LED into a product, be sure to provide appropriate WARNING labels. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 07/09 Page 1 of 8 Ultraviolet (UV) Metal Can LED OUE8A Series Absolute Maximum Ratings (TA=25°C unless otherwise noted) -40o C to +125o C Storage Temperature Range Operating Temperature Range -40o C to +85o C Allowable Reverse Current (IR) 85 mA Continuous Forward Current 100 mA Peak Pulsed Forward Current (Pulse Width 100 usec @ 10% duty cycle) 1.6 A Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C(1) Power Dissipation 370 mW Notes: 1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering. Electrical & Optical Characteristics (TA = 25°C unless otherwise noted) SYMBO L VF ΔVF/ΔT PARAMETER Forward Voltage MIN TYP MAX UNITS 3.0 3.3 3.7 V VF Temperature Co-efficient mV/oC -4.8 Spectral Half Width - 12 - nm ∆λP /∆T Peak Spectral Shift with Temperature - 0.035 - nm/°C ΔPo/ΔT Power Output Drop Temperature Co-efficient - -0.2 - %/oC Emission Angle at Half Power Points - 18 - Degree ∆λP θHP TEST CONDITIONS IF = 100 mA IF = 20 mA Pin 1 Pin 2 [13.20] 0.520 Pin 1 Cathode Pin 2 Anode Part Number Date Code Dimensions are in inches [ mm] OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 Page 2 of 8 07/09 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Ultraviolet (UV) Metal Can LED OUE8A Series Standard Optical Power Bins • Devices are sorted to Optical Power Out (mW) as shown below. • Unless designated, orders may be filled with any or all bins contained. Power Bin Identification • • Optical Power Out (mW) IF = 100 mA @ 25oC Bin Minimum Bin Maximum OUE8AxxxA 0.5 2.0 OUE8AxxxB 1.8 3.5 OUE8AxxxC 3.1 4.9 OUE8AxxxD 4.5 6.5 OUE8AxxxE 5.8 8.1 OUE8AxxxF 7.3 9.8 OUE8AxxxG 8.8 11.5 OUE8AxxxH 10.4 13.4 OUE8AxxxI 12.1 15.4 OUE8AxxxJ 13.9 17.6 Where xxx = Part Number Wavelength (nm) on page 1 Parts for a specific Power Bin are subject to availability. Spatial Intensity Distribution TA = 25°C IF = 20 mA 18 degrees Typical Normalized Spectral Intensity vs. Angular Displacement OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 07/09 Page 3 of 8 Ultraviolet (UV) Metal Can LED OUE8A Series Junction Temperature vs. Maximum Allowable Forward Current Relative Power Output vs Junction Temperature 1.2 Maximum Allowable Forward Current IF [mA] 120 Relative Power Output (mW) 1.0 0.8 0.6 0.4 0.2 100 80 60 40 20 0 0.0 0 20 40 60 80 0 100 20 o 60 Normalized Peak Spectral Responses 6,000 383nm Peak Response (W/nm) 391nm 399nm 407nm 409nm 0.6 0.4 0.2 0 350 TA = 25°C Allowable Pulsed Forward Current [mA] 386nm 0.8 100 Duty Ratio vs. Allowable Forward Current T = 1 ms & variable PW 380nm 1 80 Junction Temperature, TJ [°C] Junction Temperature ( C) 1.2 40 5,000 4,000 3,000 2,000 1,000 - 400 450 Wavelength (nm) 1 10 100 Duty Ratio (%) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 Page 4 of 8 07/09 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Ultraviolet (UV) Metal Can LED OUE8A Series Peak Wavelength vs Junction Temperature 1.010 Forward Voltage vs. Forward Current 400 * no rmalized to 25°C ** peak wavelength = wavelength o f part multiplied by y-axis scale TA = 25°C 350 300 FP [mA] 1.006 1.004 1.002 Linear (390 nm) Linear (410 nm) 1.000 Forward Current I Peak Wavelength λ [nm] ** 1.008 250 200 150 100 0.998 50 0.996 0 0 20 40 60 80 100 120 2.5 2.7 Junction Temperature TA [°C] 2.9 Typical Power Out vs. Forward Current 3.3 3.5 3.7 Typical Peak Wavelength vs. Forward Current 2.0 1.0020 TA = 25°C * no rmalized to 100 mA ** peak wavelength = wavelength o f part multiplied by y-axis scale 1.8 1.0015 1.6 Typ. Peak Wavelength [nm] ** Normalized Power Out [W] 3.1 Forw ard Voltage V F [V] 1.4 1.2 1.0 0.8 0.6 0.4 1.0010 Linear (410 nm) Linear (390 nm) 1.0005 1.0000 0.9995 0.9990 0.9985 0.2 0.9980 0.0 0 50 100 150 Forward Current [mA] 200 0 50 100 150 200 Forw ard Current [m A] OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 07/09 Page 5 of 8 Ultraviolet (UV) Metal Can LED OUE8A Series Reliability Test ITEM CONDITION NOTE FAILURES Life Test TA = RT, IF = 20 mA 1000 hrs 0/22 Temperature Humidity Operating TA = RT, IF = 20 mA, RH = 90% 1000 hrs 0/22 High Temperature Operating TA = 80ºC, IF = 5 mA 1000 hrs 0/22 Low Temperature Operating TA = -40ºC, IF =20 mA 1000 hrs 0/22 Thermal Shock TA = -40ºC (30 min) to +85ºC (30 min) [Transfer Time: 5 sec, 1 cycle = 1hr] 100 cycles 0/22 Resistance to Soldering Heat Ts = 260 ± 5ºC, Time = 5 ± 1 sec 1 time 0/11 High Temperature Storage TA = +100ºC 1000 hrs 0/22 Low Temperature Storage TA = -40ºC 1000 hrs 0/22 Criteria for judging damage CRITERIA FOR JUDGEMENT ITEM SYMBOL MEASURING CONDITION Minimum Maximum Forward Voltage VF IF = 20 mA - USL X 1.1 Optical Power Output PO IF = 20 mA LSL X 0.5 - Notes: 1. 2. 3. 4. 5. 6. 7. IF = Forward Current LSL = Lower Specification Limit RH = Relative humidity RT = Room Temperature ~ 25°C TA = Ambient Temperature TS = Solder Temperature USL = Upper Specification Limit OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 Page 6 of 8 07/09 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Ultraviolet (UV) Metal Can LED OUE8A Series Stress results Test Operating Life Samples Test conditions Total assembly hours Failures 22 1008 hours, TA @ 25ºC, 100mW operation, IF = 27.7mA 22,176 0/22 D&O 380nm UVLED Build 1 - 100mW burn-in Group H Tested at IF = 350 mA, T A = 25°C 25.00 Pt/mW 20.00 average 15.00 min max +3σ 10.00 -3σ 5.00 0.00 0 200 400 600 800 1000 1200 hours OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 07/09 Page 7 of 8 Ultraviolet (UV) Metal Can LED OUE8A Series Shipping Information: Optek UV LEDs are shipped in either of the below noted conductive trays made for ESD sensitive devices. Each tray contains up to 100 pieces and is then sealed in a plastic ESD bag. Tray dimensions are in inches (mm). 14.76 4X 0.500 [12.70] 100X 0.250 100X 0.190 13.0 100X 0.250 100X 1.320 POCKET DETAIL OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.2 Page 8 of 8 07/09 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com