PRODUCT DATA SHEET P2769 MICROPROFILE PICK-OFF TRANSFORMER Features Applications ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ Surface Mount Lead-free (Pb- free) RoHS compliant 7mm seated height Vacuum encapsulated IEC 60950 and UL 60950 certified UL Recognized Component Telecommunications Pick-off applications Calling Line Identification Instrumentation DESCRIPTION P2769 is a high impedance microprofile transformer for applications where high performance and safety isolation to international standards are required in an extremely small case size. P2769 is designed for “listening” applications when placed across a line, presenting a very high impedance to minimize circuit loading. The part is compliant with RoHS Directive 2002/95/EC, and suitable for lead-free and conventional placement and reflow. ETALDOC 332/14 Page 1 of 5 To meet requirements for ≥ 40kΩ across the voiceband, P2769 can be used in an application circuit described herein. P2769 is certified to IEC 60950 and UL 60950. P2769 is a UL Recognized Component, and is supported by an IEC CB Test Certificate. October 2007 P2769 SPECIFICATIONS Electrical At T = 25°C and reference circuit fig.2, unless otherwise stated. Parameter Conditions Min Typ Max Units Voltage isolation(1) 50Hz DC 3.88 5.5 - - kVrms kV Input impedance(3) 200Hz – 4kHz, 1Vrms, 30 - - kΩ Operating range: Functional Storage(4) Humidity Ambient temperature -25 -40 - - +85 +125 95 °C °C %R.H. - 3300 - Ω - 67 - mH Lumped equivalent circuit parameters as Fig. 1 DC resistance, RDC (2) Sum of windings Leakage inductance ΔL Shunt inductance Lp 10mV 200Hz 20 30 - H Shunt loss Rp 10mV 200Hz 80 110 - kΩ Notes 1. Components are 100% tested at 6.5 kVDC. 2. Caution: do not pass DC through windings. Telephone line current, etc. must be diverted using choke or semiconductor line hold circuit. 3. For 40kΩ impedance, see fig.3. 4. Excludes shipping materials. Components are dry-packed and sealed as shipped. Refer to Profec Technologies for appropriate storage conditions for sealed consignments. Handle in accordance with IPC/JEDEC J-STD-033 procedure for components classified as IPC/JEDEC J-STD-020 Moisture Sensitivity Level 5a. ETALDOC 332/14 Page 2 of 5 Equivalent Circuit Fig 1 IDEAL 1:1 October 2007 P2769 Reference Circuit In practice, the 100kΩ load can be increased without limit. The DC blocking capacitor should be a minimum of 0.22µF to avoid resonance within the voiceband to obtain a flat frequency response and input impedance to specification. Fig 2 0.27µF 100k P2769 40kΩ APPLICATION CIRCUITS For applications requiring impedance greater than 40kΩ for parallel-connected Terminal Equipment (e.g. ETSI TS 103 021, ≥40kΩ, 200Hz – 4.3kHz) the following circuit may be helpful. At the expense of a small loss, (approximately 1.5dBV) the circuit in fig. 3 provides an impedance exceeding 40kΩ, 200Hz – 4.3kHz, and frequency response flatness within ±0.25dB over the same band. Fig 3 15k 33n 100k P2769 Zin > 40kΩ ETALDOC 332/14 Page 3 of 5 October 2007 P2769 CONSTRUCTION Dimensions 2.54 2.54 Fig 4 (0.1) (0.1) Connections Fig 5 13.0 max (0.51) e3 9.0 max (0.36) 7.0 max (0.28) 1.5 (0.06) NOTE: 1 6 2 5 3 4 1.77 (0.07) 1.32 (0.052) Dimensions shown are in millimetres (inches) Dimensions shown are in millimetres (inches). Geometric centres of outline and pad grid coincide within a tolerance circle of 0.3mm∅. Windings may be used interchangeably as primary or secondary. ABSOLUTE MAXIMUM RATINGS COPYRIGHT (Ratings of components independent of circuit). Short term isolation voltage (2s) 4.6kVrms, 6.5kVDC DC current 100μA Storage temperature -40°C to +125°C Soldering temperature Profile peak 260°C 10s Recommended peak body temperature 245°C in accordance with IPC/JEDEC J-STD-020 ETALDOC 332/14 Page 4 of 5 ETAL and P2769 are Trade Marks of Profec Technologies Ltd. The Trade Mark ETAL is registered at the UK Trade Marks Registry. Profec Technologies Ltd. is the owner of the design right under the Copyright Designs and Patents Act 1988 and no rights or licences are hereby granted or implied to any third party. British Patent No. 2283195 US Patent No. 5879598 European Patent No. 0725719 © 1997 - 2007 Profec Technologies Ltd. Reproduction prohibited. October 2007 P2769 SAFETY CERTIFICATION Manufactured from materials conforming to flammability requirements of UL94V-0. Distance through reinforced insulation 0.4mm minimum. Creepage and clearances in circuit are 7mm minimum where PCB pads do not exceed 3mmØ. Construction complies with IEC 60950-1, EN 60950-1 and UL 60950-1, reinforced insulation, 250Vrms maximum working voltage. Certified by BSI to IEC 60950 Third Edition (1999) (IEC CB Test Certificate No. GB592W) sub-clauses 1.5, 1.5.1, 1.5.2, 2.9, 2.9.1, 2.9.2, 2.9.3, 2.9.4, 2.9.5, 2.10, 2.10.1, 2.10.2, 2.10.3, 2.10.3.1, 2.10.3.2, 2.10.4, 2.10.5, 2.10.5.1, 2.10.7, 2.10.8, 4.7, 4.7.3, 4.7.3.1, 4.7.3.4, (Flammability Class V-0) ,5.2, 5.2.1, and 5.2.2 for a maximum working voltage of 250Vrms, nominal mains supply voltage not exceeding 250Vrms and a maximum operating temperature of +85°C in Pollution Degree 2 environment, reinforced insulation. Recognized under the Component Recognition Program of Underwriters Laboratories Inc. to US and Canadian requirements CAN/CSA C22.2 No. 60950-1-03/UL60950-1, First Edition, based on IEC 60950-1, First Edition, maximum working voltage 250Vrms, Pollution Degree 2, reinforced insulation. UL File number E203175. Additionally, Profec Technologies certifies all transformers as providing voltage isolation of 3.88kVrms, 5.5kV DC minimum. All shipments are supported by a Certificate of Conformity to current applicable safety standards. ORDERING CODE P2769 TR = Tape and Reel (Blank) = Bulk in tubes. Carrier tape width 24mm, 500 parts per 13” reel. E203175 ISO 9001 FM 25326 ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: [email protected] ETALDOC 332/14 Page 5 of 5 October 2007