GENERAL PURPOSE SILICON RECTIFIER P300A THRU VOLTAGE RANGE CURRENT P300M 50 to 1000 Volts 3.0 Ampere FEATURES Low cost construction. Low forward voltage drop Low reverse leakage High forward surge current capability. High temperature soldering guaranteed: 260/10 seconds, 0.375" (9.5mm)lead length at 5 lbs (2.3kg) tension. MECHANICAL DATA Case: transfer molded plastic Epoxy: UL94V - 0 rate flame retardant. Polarity: Color band denotes cathode end. Lead: Plated axial lead, solderable per MIL - STD - 202E method 208C Mounting position: Any Weight: 0.042 ounce, 1.19grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) lead length at TA = 55 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current at rated TA = 25 TA DC blocking voltage Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TL = 105 Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note2) Operating and Storage Temperature Range Storage Temperature Range SYMBOLS P300A P300B VRRM 50 100 VRMS 35 70 VDC 50 100 P300D P300G 200 400 140 280 200 400 P300J P300K P300M 600 420 600 UNIT Volts Volts Volts I(AV) Amps IFSM Amps VF Volts IR(AV) 500 A CJ RθJA TJ TSTG 40 30 (-65 to +175) (-65 to +175) pF /W IR NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2. Thermal Resistance from Junction to Ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 0.8" X 0.8" (20 X 20mm) copper heatsink. MIC INVESTMENTS (CHINA) COMPANY LIMITED A RATINGS AND CHARACTERISTIC CURVES P300A THRU P300M FIG.2-MAXIMUM NON-REPETITIVE PEAK FIG.1-TYPICAL FORWARD CURRENT FORWARD SURGE CURRENT 200 2.0 Single Phase Half Wave 60Hz 1.0 Resistive or Inductive Load Lead Length 0.375"(9.5mm) 8.3ms Single Half Sine-Wave Tj =T j max (JEDEC Method) 100 80 CURRENT, (A) PEAK FORWARD SURGE 3.0 (A) AVERAGE FORWARD CURRENT, DERATING CURVE 60 40 20 1 Cycle 0 0 0.1 75 50 55 25 100 125 150 175 10 1 2 AMBIENT TEMPERATURE, ( ° C) 4 6 8 20 10 40 60 80 100 NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FIG.4-TYPICAL REVERSE CHARACTERISTICS 100 20 1.0 Tj =25 ° C 1% Duty Cycle 0.1 Tj =100 ° C 1.0 (uA) INSTANTANEOUS REVERSE CURRENT, 10 (A) INSTANTANEOUS FORWARD CURRENT, 10 0.1 Tj =25 ° C 0.01 0 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 20 40 60 80 100 1.8 PERCENT OF RATED PEAK INSTANTANEOUS FORWARD VOLTAGE,(V) REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 100 10 T =25 ° C j f=1MHz V sig =50mV p-p 1 0.1 1.0 REVRESE VOLTAGE,(V) 100 120 140