P6SMB SERIES Surface Mount Transient Voltage Suppressor Voltage Range 6.8 to 200 Volts 600 Watts Peak Power SMB/DO-214AA Features For surface mounted application in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1μA above 10V High temperature soldering guaranteed: 250OC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 600 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle .082(2.08) .076(1.93) .147(3.73) .137(3.48) .187(4.75) .167(4.25) .012(.31) .006(.15) .103(2.61) .078(1.99) .012(.31) .006(.15) .056(1.41) .035(0.90) Mechanical Data .008(.20) .004(.10) .208(5.28) .200(5.08) Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Standard packaging: 12mm tape (EIA STD RS-481) Weight: 0.093gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Type Number Symbol Value Peak Power Dissipation at TA=25OC, Tp=1ms(Note 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3) - Unidirectional Only Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) Operating and Storage Temperature Range Units PPK Minimum 600 Watts IFSM 100 Amps VF 3.5 Volts TJ, TSTG -65 to + 150 O O C Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 C Per Fig. 2. 2. Mounted on 5.0mm2 (.013 mm Thick) Copper Pads to Each Terminal. 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum. Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types P6SMB6.8 through Types P6SMB200A. 2. Electrical Characteristics Apply in Both Directions. - 620 - RATINGS AND CHARACTERISTIC CURVES (P6SMB SERIES) PEAK PULSE POWER (PPP) or CURRENT (IPPM) DERATING IN PERCENTAGE. % FIG.1- PEAK PULSE POWER RATING CURVE PPPM, PEAK PULSE POWER, KW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 O TJ = 25 C 10 1 0.1 0.1 s 1.0 s 10 s 100 s 1.0ms 10ms tp, PULSE WIDTH, sec. FIG.2- PULSE DERATING CURVE 100 75 50 25 0 0 100 PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPPM Half Value - IPPM 2 10/1000 sec. WAVEFORM as DEFINED by R.E.A. 50 td 0 0 1.0 2.0 3.0 IFSM, PEAK FORWARD SURGE CURRENT. AMPERES Peak Value IPPM 100 125 150 8.3ms Single Half Sine Wave JEDEC Method 100 50 FIG.5- TYPICAL REVERSE LEAKAGE CHARACTERASTICS 1 2 4 6 8 10 20 40 FIG.6- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 1000 6000 MEASURED at ZERO BIAS CJ,JUNCTION CAPACITANCE. (pF) 100 MEASURED AT DEVICES STAND-OFF VOLTAGE, VWM 1 0.1 0.01 1000 O Tj =25 C f = 1.0MHz Vsig = 50 mVp-p MEASURED at STAND-OFF VOLTAGE, VWM 100 O TJ = 25 C 0.001 10 0 100 200 300 400 500 V(BR), BREAKDOWN VOLTAGE. VOLTS 1 10 100 V(BR), BREAKDOWN VOLTAGE. VOLTS - 621 - 200 FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY NUMBER OF CYCLES AT 60Hz 10 175 200 10 4.0 75 O t, TIME, ms ID, INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PEAK PULSE CURRENT - % tr = 10 sec 50 TA, AMBIENT TEMPERATURE. ( C) FIG.3- PULSE WAVEFORM 150 25 200 60 80 100 ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) Device Device Marking Code Breakdown Voltage Test Stand-Off Maximum Maximum Maximum Maximum Current Voltage Reverse Leakage Peak Pulse Clamping Temperature VBR @IT VWM at VWM Current IRSM Voltage at IPPM Coefficient (Volts) (Note 1) O Min Max (mA) (Volts) ID (uA) (Note 2)(Amps) VC(Volts) of VBR(% / C) P6SMB6.8 KDJ 6.12 7.48 10 5.50 1000 58 10.8 0.057 P6SMB6.8A KEJ 6.45 7.14 10 5.80 1000 60 10.5 0.057 P6SMB7.5 KFJ 6.75 8.25 10 6.05 500 53 11.7 0.061 P6SMB7.5A KGJ 7.13 7.88 10 6.40 500 55 11.3 0.061 P6SMB8.2 KHJ 7.38 9.02 1.0 6.63 200 50 12.5 0.065 P6SMB8.2A KKJ 7.79 8.61 1.0 7.02 200 52 12.1 0.065 P6SMB9.1 KLJ 8.19 10.0 1.0 7.37 50 45 13.8 0.068 P6SMB9.1A KMJ 8.65 9.55 1.0 7.78 50 47 13.4 0.068 P6SMB10 KNJ 9.00 11.0 1.0 8.10 10 42 15.0 0.073 P6SMB10A KPJ 9.50 10.5 1.0 8.55 10 43 14.5 0.073 P6SMB11 KQJ 9.90 12.1 1.0 8.92 5.0 38 16.2 0.075 P6SMB11A KRJ 10.5 11.6 1.0 9.40 5.0 40 15.6 0.075 P6SMB12 KSJ 10.8 13.2 1.0 9.72 5.0 36 17.3 0.078 P6SMB12A KTJ 11.4 12.6 1.0 10.2 5.0 37 16.7 0.078 P6SMB13 KUJ 11.7 14.3 1.0 10.5 5.0 33 19.0 0.081 P6SMB13A KVJ 12.4 13.7 1.0 11.1 5.0 34 18.2 0.081 P6SMB15 KWJ 13.5 16.5 1.0 12.1 5.0 28 22.0 0.084 P6SMB15A KXJ 14.3 15.8 1.0 12.8 5.0 29 21.2 0.084 P6SMB16 KYJ 14.4 17.6 1.0 12.9 5.0 26 23.5 0.086 P6SMB16A KZJ 15.2 16.8 1.0 13.6 5.0 28 22.5 0.086 P6SMB18 LDJ 16.2 19.8 1.0 14.5 5.0 23 26.5 0.088 P6SMB18A LEJ 17.1 18.9 1.0 15.3 5.0 25 25.2 0.088 P6SMB20 LFJ 18.0 22.0 1.0 16.2 5.0 21 29.1 0.090 P6SMB20A LGJ 19.0 21.0 1.0 17.1 5.0 22 27.7 0.090 P6SMB22 LHJ 19.8 24.2 1.0 17.8 5.0 19 31.9 0.092 P6SMB22A LKJ 20.9 23.1 1.0 18.8 5.0 20 30.6 0.092 P6SMB24 LLJ 21.6 26.4 1.0 19.4 5.0 18 34.7 0.094 P6SMB24A LMJ 22.8 25.2 1.0 20.5 5.0 19 33.2 0.094 P6SMB27 LNJ 24.3 29.7 1.0 21.8 5.0 16 39.1 0.096 P6SMB27A LPJ 25.7 28.4 1.0 23.1 5.0 16.8 37.5 0.096 P6SMB30 LQJ 27.0 33.0 1.0 24.3 5.0 14 43.5 0.097 P6SMB30A LRJ 28.5 31.5 1.0 25.6 5.0 15 41.4 0.097 P6SMB33 LSJ 29.7 36.3 1.0 26.8 5.0 13.0 47.7 0.098 0.098 P6SMB33A LTJ 31.4 34.7 1.0 28.2 5.0 13.8 45.7 P6SMB36 LUJ 32.4 39.6 1.0 29.1 5.0 12 52.0 0.099 P6SMB36A LVJ 34.2 37.8 1.0 30.8 5.0 12.6 49.9 0.099 P6SMB39 LWJ 35.1 42.9 1.0 31.6 5.0 11.1 56.4 0.100 P6SMB39A LXJ 37.1 41.0 1.0 33.3 5.0 11.6 53.9 0.100 P6SMB43 LYJ 38.7 47.3 1.0 34.8 5.0 10.0 61.9 0.101 P6SMB43A LZJ 40.9 45.2 1.0 36.8 5.0 10.6 59.3 0.101 P6SMB47 MDJ 42.3 51.7 1.0 38.1 5.0 9.2 67.8 0.101 P6SMB47A MEJ 44.7 49.4 1.0 40.2 5.0 9.7 64.8 0.101 P6SMB51 MFJ 45.9 56.1 1.0 41.3 5.0 8.5 73.5 0.102 P6SMB51A MGJ 48.5 53.6 1.0 43.6 5.0 8.9 70.1 0.102 P6SMB56 MHJ 50.4 61.6 1.0 45.4 5.0 7.8 80.5 0.103 P6SMB56A MKJ 53.2 58.8 1.0 47.8 5.0 8.1 77.0 0.103 P6SMB62 MLJ 55.8 68.2 1.0 50.2 5.0 7.0 89.0 0.104 P6SMB62A MMJ 58.9 65.1 1.0 53.0 5.0 7.4 85.0 0.104 P6SMB68 MNJ 61.2 74.8 1.0 55.1 5.0 6.4 98.0 0.104 P6SMB68A MPJ 64.6 71.4 1.0 58.1 5.0 6.8 92.0 0.104 P6SMB75 MQJ 67.5 82.5 1.0 60.7 5.0 5.8 108.0 0.105 P6SMB75A MRJ 71.3 78.8 1.0 64.1 5.0 6.1 103.0 0.105 P6SMB82 MSJ 73.8 90.2 1.0 66.4 5.0 5.3 118.0 0.105 P6SMB82A MTJ 77.9 86.1 1.0 70.1 5.0 5.5 113.0 0.105 - 622 - ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) Device P6SMB91 P6SMB91A P6SMB100 P6SMB100A P6SMB110 P6SMB110A P6SMB120 P6SMB120A P6SMB130 P6SMB130A P6SMB150 P6SMB150A P6SMB160 P6SMB160A P6SMB170 P6SMB170A P6SMB180 P6SMB180A P6SMB200 P6SMB200A P6SMB220 P6SMB220A Device Marking Code MUJ MVJ MWJ MXJ MYJ MZJ NDJ NEJ NFJ NGJ NHJ NKJ NLJ NMJ NNJ NPJ NQJ NRJ NSJ NTJ NUJ NVJ Breakdown Voltage Test VBR Current (Volts) (Note 1) @IT Min Max (mA) 81.9 86.5 90.0 95.0 99.0 105.0 108.0 114.0 117.0 124.0 135.0 143.0 144.0 152.0 153.0 162.0 162.0 171.0 180.0 190.0 198.0 209.0 100.0 95.5 110.0 105.0 121.0 116.0 132.0 126.0 143.0 137.0 165.0 158.0 176.0 168.0 187.0 179.0 198.0 189.0 220.0 210.0 242.0 231.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Stand-Off Voltage VWM (Volts) Maximum Maximum Maximum Reverse Leakage Peak Pulse Clamping at VWM Current IRSM Voltage at IPPM ID (uA) (Note 2)(Amps) VC(Volts) 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 175.0 185.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Notes: 1. VBR measured after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waverform per Figure 3 and derate per Figure 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. For bidirectional use C or Ca suffix for types P6SMB6.8 through P6SMB200A. 5. All terms and symbols are consistent with ANSI/IEEE C62.35. - 623 - 4.8 5.0 4.3 4.5 3.9 4.1 3.6 3.8 3.3 3.5 2.9 3.0 2.7 2.8 2.5 2.6 2.4 2.5 2.1 2.2 1.8 1.9 131.0 125.0 144.0 137.0 158.0 152.0 173.0 165.0 187.0 179.0 215.0 207.0 230.0 219.0 244.0 234.0 258.0 246.0 287.0 274.0 342.0 328.0 Maximum Temperature Coefficient O of VBR(% / C) 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108