RoHS Power Chip Shielded Inductors Dimensions: PCS124 Inches (mm) Inductance (µh) Tolerance (%) Test Freq. KHz, 1V DCR Max. (Ω) IDC (A) PCS124-3R3M-RC 3.3 20 100 0.015 6.5 PCS124-3R9M-RC 3.9 20 100 0.015 6.5 PCS124-4R7M-RC 4.7 20 100 0.018 5.7 PCS124-6R8M-RC 6.8 20 100 0.023 4.9 PCS124-100M-RC 10 20 100 0.028 4.5 PCS124-120M-RC 12 20 100 0.038 4.0 PCS124-150M-RC 15 20 100 0.050 3.2 PCS124-180M-RC 18 20 100 0.057 3.1 PCS124-220M-RC 22 20 100 0.066 2.9 PCS124-270M-RC 27 20 100 0.080 2.8 PCS124-330M-RC 33 20 100 0.097 2.7 PCS124-390M-RC 39 20 100 0.132 2.1 PCS124-470M-RC 47 20 100 0.150 1.9 PCS124-560M-RC 56 20 100 0.190 1.8 PCS124-680M-RC 68 20 100 0.220 1.5 PCS124-820M-RC 82 20 100 0.260 1.3 PCS124-101M-RC 100 20 100 0.308 1.2 Physical Packaging: 500 pieces per 13 inch reel Marking: EIA Inductance Code Allied Part Number Features • • • • • Magnetically Shielded Low DCR Resistance High Energy Storage Low Energy Loss Suitable for pick and place Electrical Inductance Range: 3.3µh to 330µh Tolerance: 20% Across entire range Test Frequency: 100Khz, 1V Operating Temp: -40ºC ~ 85ºC Rated Current: Inductance drop 35% Typical Resistance to Soldering Heat PCS124-121M-RC 120 20 100 0.380 1.1 PCS124-151M-RC 150 20 100 0.530 .95 PCS124-181M-RC 180 20 100 0.650 .85 PCS124-221M-RC 220 20 100 0.700 .80 PCS124-271M-RC 270 20 100 0.876 .60 PCS124-331M-RC 330 20 100 0.990 .50 Pre-Heat 150ºC, 1 min. Solder Temp: 260ºC ± 5ºC Solder Composition: Sn/Ag3.0/Cu0.5 Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502 (IDA): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 4/02/08 15 www.alliedcomponents.com