PCS1P2859A January 2007 rev 0.1 Multi-Output Clock Synthesizer Features Product Description • Generates multiple clock outputs from an inexpensive The PCS1P2859A is a Precision multi-PLL based frequency synthesizer. The six Clock outputs are 25MHz crystal or external reference clock • Frequency outputs: generated using an inexpensive 25MHz Crystal. The • 25MHz Reference clock outputs consist of 25 MHz reference clock, 33 MHz, two • 33MHz 127MHz and two 48MHz clocks. The SHUTDOWNB tri- • 48MHz states all the clocks when enabled. The device operates • 127MHz from a Supply Voltage of 3.3V±5%V. The device is • Zero ppm frequency synthesis error for all CLK outputs available in a 16-pin TSSOP JEDEC package for • 3.3V ± 5%V Supply Voltage Industrial temperature range. • Low jitter design • Packaged in 16 pin TSSOP Application • Industrial Temperature range PCS1P2859A is targeted for use in high-end multimedia, • Compatible with CY22393XC-F12 communications and consumer applications. • Advanced low-power CMOS process Block Diagram AVDD VDD SHUTDOWNB 48M_ENBLB 33MHz CLKIN/XIN Crystal Oscillator PLL 2 48MHz XOUT 2 127MHz 25MHz AGND GND PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018 www.pulsecoresemi.com Notice: The information in this document is subject to change without notice. PCS1P2859A January 2007 rev 0.1 Pin Diagram 127MHz 1 16 SHUTDOWNB VDD 2 15 48M_ENBLB AGND 3 14 AVDD XIN 4 13 NC XOUT 5 12 NC REFOUT 6 11 GND 48MHz 7 10 33MHz 48MHz 8 9 127MHz PCS1P2859A Pin Description Pin # Pin Name Pin Type 1 127MHz Output 127MHz Clock Output Pin Description 2 VDD Power Connect to +3.3V 3 AGND Power 4 XIN Input 5 XOUT Output 6 REFOUT Output Connect to ground Crystal connection or external reference frequency input. It can be connected to a 25MHz Fundamental mode crystal Connection to crystal. If using an external reference clock, this pin must be left unconnected 25MHz Reference Clock output 7 48MHz Output 48MHz Clock Output 8 48MHz Output 48MHz Clock Output 9 127MHz Output 127MHz Clock Output 10 33MHz Output 33MHz Clock Output 11 GND Power Connect to ground 12 NC No connection 13 NC No connection 14 AVDD Power 15 48M_ENBLB Input 16 SHUTDOWNB Input Connect to +3.3V 48MHz Output Enable bit. When this pin is made LOW, the 48MHz clocks are enabled.Tri-states 48MHz clocks when this pin is HIGH. Output Enable bit. When this pin is made HIGH, all clocks are enabled. Tri-states all clocks when this pin is LOW. Multi-Output Clock Synthesizer Notice: The information in this document is subject to change without notice. 2 of 7 PCS1P2859A January 2007 rev 0.1 Absolute Maximum Ratings Symbol VDD VIN TSTG Parameter Rating Power Supply Voltage relative to Ground Unit -0.5 to +4.6 Input Voltage relative to Ground (Input Pins) -0.5 to VDD+0.3 Storage temperature V -65 to +150 °C Ts Max. Soldering Temperature (10 sec) 260 °C TJ Junction Temperature 125 °C 2 KV TDV Static Discharge Voltage (As per JEDEC STD22- A114-B) Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability. Operating Conditions Parameter VDD /AVDD Description Operating Voltage TA Operating Temperature (Ambient Temperature) CL Load Capacitance CIN Input Capacitance Min Typ Max Unit 3.135 3.3 3.465 V -40 +85 °C 15 pF 5 pF DC Electrical Characteristics Symbol Min Typ Max Units VDD /AVDD Operating Voltage 3.135 3.3 3.465 V VIH Input High Voltage 2.2 VDD=0.3 V VIL Input Low Voltage GND-0.3 1.0 V VOH Output High Voltage VDD=3.135,IOH= -12mA VOL Output Low Voltage VDD=3.135, IOL= 12mA 0.4 V IOZ Output Leakage Current TBD µA ICC Static Current TBD µA IDD Dynamic Current Nominal output impedance Three-state outputs CLKIN and SHUTDOWN Pins pulled low No Load, All Clocks on ZOUT Parameter Conditions 2.4 Multi-Output Clock Synthesizer Notice: The information in this document is subject to change without notice. V TBD mA 23 Ω 3 of 7 PCS1P2859A January 2007 rev 0.1 AC Electrical Characteristics Symbol CLKIN/XIN CLK OUT Parameter Min Input Frequency Output Frequency Typ Max Unit 25 MHz Pin 10 33 MHz Pin 7,8 48 MHz Pin 1,9 127 MHz Pin 6 25 MHz tLH1 Output Rise Time (Measured from 20% to 80%) 0.75 1.4 2.0 nS tHL1 Output Fall Time (Measured from 80% to 20%) 0.75 1.4 2.0 nS tJC1 Cycle to cycle Jitter ±TBD pS TPJ1 Period Jitter ±TBD pS 0 ppm Synthesis Error (Output Frequency) tD1 tLOCK Output Duty Cycle 45 PLL Lock Time from Power-Up 50 55 % 1 3 mS NOTE: 1. Measured with 15pF capacitive load Typical Crystal Oscillator Circuit R1 = 510Ω C1 = 27 pF C2 = 27 pF Typical Crystal Specifications Fundamental AT cut parallel resonant crystal Nominal frequency 25MHz Frequency tolerance ± 50 ppm or better at 25°C Operating temperature range -25°C to +85°C Storage temperature -40°C to +85°C Load capacitance 18pF Shunt capacitance 7pF maximum ESR 25Ω Multi-Output Clock Synthesizer Notice: The information in this document is subject to change without notice. 4 of 7 PCS1P2859A January 2007 rev 0.1 Package Information 16-lead Thin Shrunk Small Outline Package (4.40-MM Body) 1 8 PIN 1 ID E 16 A A2 e B A1 Seating Plane C θ D 9 H L D Dimensions Symbol Inches Min Millimeters Max A Min Max 0.043 1.20 A1 0.002 0.006 0.05 0.15 A2 0.031 0.041 0.80 1.05 B 0.007 0.012 0.19 0.30 C 0.004 0.008 0.09 0.20 D 0.193 0.201 4.90 5.10 E 0.169 0.177 4.30 4.50 e 0.026 BSC 0.65 BSC H 0.252 BSC 6.40 BSC L 0.020 0.030 0.50 0.75 θ 0° 8° 0° 8° Multi-Output Clock Synthesizer Notice: The information in this document is subject to change without notice. 5 of 7 PCS1P2859A January 2007 rev 0.1 Ordering Information Part Number Marking Package Temperature PCS1P2859AG-16TR 1P2859AG 16-Pin TSSOP, TAPE & REEL, Green Commercial PCS1P2859AG-16TT 1P2859AG 16-Pin TSSOP, TUBE, Green Commercial PCS1I2859AG-16TR 1I2859AG 16-Pin TSSOP, TAPE & REEL, Green Industrial PCS1I2859AG-16TT 1I2859AG 16-Pin TSSOP, TUBE, Green Industrial Device Ordering Information P C S 1 P 2 8 5 9 A G - 1 6 - T R R = Tape & Reel, T = Tube or Tray O = TSOT23 S = SOIC T = TSSOP A = SSOP V = TVSOP B = BGA Q = QFN U = MSOP E = TQFP L = LQFP U = MSOP P = PDIP D = QSOP X = SC-70 J=TSOT26 DEVICE PIN COUNT G = GREEN PACKAGE, LEAD FREE, and RoHS PART NUMBER X= Automotive I= Industrial P or n/c = Commercial (-40C to +125C) (-40C to +85C) (0C to +70C) 1 = Reserved 2 = Non PLL based 3 = EMI Reduction 4 = DDR support products 5 = STD Zero Delay Buffer 6 = Power Management 7 = Power Management 8 = Power Management 9 = Hi Performance 0 = Reserved PulseCore Semiconductor Mixed Signal Product Licensed under US patent Nos 5,488,627 and 5,631,920. Multi-Output Clock Synthesizer Notice: The information in this document is subject to change without notice. 6 of 7 PCS1P2859A January 2007 rev 0.1 PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200 Campbell, CA 95008 Tel: 408-879-9077 Fax: 408-879-9018 www.pulsecoresemi.com Copyright © Alliance Semiconductor All Rights Reserved Part Numbers: PCS1P2859A Document Version: 0.1 Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore semiconductor, dated 11-11-2003 © Copyright 2007 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or registered trademarks of PulseCore Semiconductor. All other brand and product names may be the trademarks of their respective companies. PulseCore reserves the right to make changes to this document and its products at any time without notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale. The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use. Multi-Output Clock Synthesizer Notice: The information in this document is subject to change without notice. 7 of 7