PD10-0040-S Two-Way Power Divider 10 - 500 MHz Features • • • • • FP-2 Space Qualified version of DS-109 Designed to meet the Stringent Reliability Standards of Space Hardware 50 Ohms Nominal Impedance 35 dB Midband Isolation 1.1:1 Midband VSWR 0.312 MIN TYP (7.9 MIN) PIN 0.015 DIA ±0.005 (0.38 ±0.13) 8 PLACES 1 2 3 4 0.385 ±0.020 (9.8 ±0.5) 5 6 7 8 Description M/A-COM’s PD10-0040-S is a Two-Way Power Divider designed to operate between 10 and 500 MHz 0.080 (2.0) 0.100 (2.5) 0.250 (6.3) Absolute Maximum Ratings1 Parameter Max. Input Power Operating Temperature Storage Temperature 0.350 (8.9) 0.051 (12.9 ±0.5)) Absolute Maximum 1 Watt Max. -30°C to +85°C -65°C to +125°C 0.150 MAX (3.8 MAX) 0.060 (1.5) 1. Operation of this device above any one of these parameters may cause permanent damage. Electrical Specifications, TA = +25°C Parameter Test Conditions Insertion Loss 0 Volts Isolation Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS Frequency Units Min. Max. 10-500 MHz dB - 0.6 - dB 25 - Amplitude Balance 10-500 MHz dB - 0.15 Phase Balance 10-500 MHz - - 1° VSWR 10-500 MHz - - 1.3 1. All specifications apply with a 50-Ohm source and load impedance. Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 2.0 1