• 5 WATTS REGULATED OUTPUT POWER • 2:1 WIDE INPUT VOLTAGE RANGE • INTERNATIONAL SAFETY STANDARD APPROVAL • OVER CURRENT PROTECTION • HIGH EFFICIENCY UP TO 80% • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE The PFKC05 series offer 5 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with PFKC03, FKC03, FKC05 series. PFKC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The PFKC05 features 1600VDC of isolation and, short-circuit protection and suffix “ H ” can get 3000VDC isolation. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. UL E193009 TUV R50008270 CB JPTUV-003680 CE MARK T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Output power 5 Watts max Voltage accuracy Full load and nominal Vin ± 2% Minimum load (Note 1) 10% of FL Line regulation LL to HL at Full Load ± 0.2% Load regulation 25% to 100% FL Single Dual ± 0.5% ± 2% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% 3.3V/5V 75mVp-p 20MHz bandwidth others 1%/p-p of Vout max Ripple and noise I0.02% / ºC, max Temperature coefficient Transient response recovery time 25% load step change Over load protection % of FL at nominal input Short circuit protection 500uS 180% typ Continuous, automatics recovery INPUT SPECIFICATIONS Input filter 9 – 18VDC 18 – 36VDC 36 – 75VDC Pi type Input surge voltage 100mS max 12V input 24V input 48V input Input reflected ripple Nominal Vin and full load Nominal Vin and constant resistor load OUTPUT POWER (%) Start up time PFKC05-48S05 Derating Curve 100 75 50 Nature convection 25 0 -40-25-10 0 Isolation voltage See table Input to Output Standard Suffix -H 50 60 70 80 90 100 AMBIENT TEMPERATURE (ºC) 36VDC 50VDC 100VDC 150mAp-p 30mS typ 1600VDC, min 3000VDC, min 9 Isolation resistance 10 ohms, min Isolation capacitance 300pF, max Switching frequency 100KHz, min Approvals and standard IEC60950, UL1950, EN60950 Case material Non-conductive black plastic Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 14g (0.48oz) 15g (0.52oz) Dimensions Weight DIP SMD 3.731 x 106 hrs MTBF (Note 2) 12V nominal input 24V nominal input 48V nominal input Input voltage range Efficiency ENVIRONMENTAL SPECIFICATIONS Operating temperature range -25ºC ~ +71ºC Storage temperature range -55ºC ~ +105ºC Thermal shock MIL-STD-810D Vibration 10~55Hz, 2G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS Conducted emissions EN55022 Level A Radiated emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria2 Radiated immunity EN61000-4-3 Perf. Criteria2 Fast transient EN61000-4-4 Perf. Criteria2 Surge EN61000-4-5 Perf. Criteria2 Conducted immunity EN61000-4-6 Perf. Criteria2 (4) Model Number Input Range Output Voltage Output Current Input (3) Current Eff (%) PFKC05-12S33 PFKC05-12S05 PFKC05-12S12 PFKC05-12S15 PFKC05-12D05 PFKC05-12D12 PFKC05-12D15 PFKC05-24S33 PFKC05-24S05 PFKC05-24S12 PFKC05-24S15 PFKC05-24D05 PFKC05-24D12 PFKC05-24D15 PFKC05-48S33 PFKC05-48S05 PFKC05-48S12 PFKC05-48S15 PFKC05-48D05 PFKC05-48D12 PFKC05-48D15 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 404mA 579mA 618mA 658mA 571mA 605mA 625mA 202mA 278mA 306mA 325mA 282mA 299mA 309mA 100mA 141mA 153mA 162mA 143mA 149mA 154mA 72 76 80 80 77 80 80 72 79 81 81 78 81 81 73 78 81 81 77 81 81 (5) Capacitor Load max 2200uF 1000uF 220uF 150uF ± 680uF ± 100uF ± 68uF 2200uF 1000uF 220uF 150uF ± 680uF ± 100uF ± 68uF 2200uF 1000uF 220uF 150uF ± 680uF ± 100uF ± 68uF Note Pin size is 0.02(0.5) Dia or 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin Suffix-SMD 0.60(15.2) 0.15 (3.8) 20 16 9 13 12 0.80(20.3) SMD PIN CONNECTION DIP PIN CONNECTION SINGLE DUAL 5 1. All dimensions in Inches (mm) 2. Pin pitch tolerance I0.014(0.35) 0.80(20.3) PIN BOTTOM VIEW Pin Area 0.04 x 0.02 (1.0 x 0.5) 0.40 (10.2) 1 1.26 (32.0) 9 10 11 24 0.43(10.9) 0.25 (6.35) BOTTOM VIEW 16 15 14 0.02(0.5) 2 3 1.25 (31.8) 23 22 0.15 (3.81) 0.92(23.4) 0.44(11.2) 0.10 (2.54) 1.00(25.4) 0.18(4.6) 0.20 (5.1) 2. 3. 4. 5. The PFKC05 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. 0.90 (22.9) 1. PIN 2 3 - INPUT - INPUT - INPUT - INPUT 23 22 9 10 11 NC NC NC COMMON NC - OUTPUT 16 15 14 SINGLE + INPUT + INPUT DUAL + INPUT + INPUT - OUTPUT COMMON NC NC + OUTPUT + OUTPUT PIN SINGLE DUAL PIN SINGLE DUAL 2 3 - INPUT - INPUT - INPUT - INPUT 23 22 + INPUT + INPUT + INPUT + INPUT 9 10 11 Others NC NC NC NC 16 - OUTPUT COMMON COMMON NC 15 NC NC - OUTPUT 14 + OUTPUT + OUTPUT NC Others NC NC