INTERFACE CONVERTER CARD PI-005 10 BIT VIDEO TO FIBRE OPTIC TRANSMITTER The PI-005 is a stand-alone solution for 10 bit parallel video to fibre optic (serial) conversion. The module can accommodate two fibre optic outputs or one fibre optic and one SMPTE 259M compliant electrical output. Using the Gennum chipset the PI-005 provides EDH insertion for SMPTE 259M serial interface for composite and component standards. The PI-005 complements the PO-005 fibre to parallel module. INPUT Parallel multiplexed component signals to CCIR Rec 656. Note. To ease interfacing into equipment data is latched by the rising edge of the clock. Data set up time: Data hold time: OUTPUT Output options: 3 ns min to positive edge of clock 2.5 ns min from positive edge of clock Optical wavelength: Optical output power: Fibre: Output connectors: Package A: Outputs 1 & 2 2 off Optical fibre Package B: Outputs 1 & 3 1 off Optical fibre and 1 off Electrical (compliant with SMPTE 259M) 1270nm to 1380nm 14dBm max 0.275nA 62.5/125µ ST multimode (optical); 75Ω BNC (electrical) SUPPLY Power: Current: 5V 300mA max EDH OPTION Indications: Controls: EDH - Error detected Here EDA - Error detected already UES - Unknown Error status Transmit/Receive Mode: Bypass Mode: (Note 1) (Note 1) (Note 1) (Note 2) (Note 2) Note 1. These are accessible only through the serial interface SCL and SDA. Note 2. These are available only through the I/O interface see connector for details. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara228p Page 1 of 3 Aug-05(B) Connector Pinout 1 +5V 13 +5V 2 CLK 14 +5V 3 D0 15 A0 4 D1 16 A1 5 D2 17 SDA 6 D3 18 SCL 7 D4 19 RESET 25 NC 37 NC 26 NC 38 NC 27 NC 39 NC 28 NC 40 NC 29 NC 41 NC 30 NC 42 NC 31 NC 43 NC D0 to D9 CLK A0,A1 SCL,SDA ID0,ID1,ID2 8 D5 20 R/T EDH 32 NC 44 NC 9 D6 21 BYPASS EDH 33 NC 45 NC 10 D7 22 GND 11 D8 23 GND 12 D9 24 GND 34 NC 46 ID0 35 NC 47 ID1 36 NC 48 ID2 Parallel Data Bus D0 LSB , D9 MSB Parallel Data clock Address lines to modify I2 c bus address. I2 c data and clock lines Card type identification code. Card Type Identification code. CARD TYPE PI-005 ID2 0V ID1 0V ID0 0V Ordering codes PI-005 A YYY X Product type Special variations Mechanical Package A,B Requested Options 000 = No option fitted EDH = EDH option fitted Note: This item is NOT aqueous washable. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara228p Page 2 of 3 Aug-05(B) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara228p Tel: Fax: Email: Web site: Page 3 of 3 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Aug-05(B)