P-tec Corporation Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL01 Series 3mm (T1) LED Absolute Maximum Ratings at TA = 25°C Features *Popular 3mm Lens Style without Flange *1 GaAsP Hi-Eff Red Chip used *Color Diffused Lens with a Wide Viewing Angle *High Intensity *Low Current Requirement *Reliable and Rugged *RoHS Compliant Power Dissipation……………………………………………………………..…….…... 78mW Reverse Voltage (<100µA)………..…………...…………………………..……..…..…..…. 5.0V Max Forward Current…………..………………..……………………….……….…..….. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………….….…..….…… 100mA Operating Temperature Range…………………………………………….…… -25°C to +85°C Storage Temperature Range..………….………………….……………......… -40°C to +100°C Soldering Temperature (1.6mm below body)……………………………...….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material Color Diffused Lens PL01-CDR12 Orange-Red GaAsP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 635 626 54° 2.1 2.6 10.0 30.0 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads. 5.1 24.0Min. 0.5 Square 3.0 2.54 ±0.1 0.5±0.5 1.5typ. 03-07-07 Rev 0 RS