!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines Murata Manufacturing Co., Ltd. Cat.No.C09E-11 C09E.pdf 06.2.9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. CONTENTS 1 EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd. Part Numbering 2 Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines 3 1 2 Common Mode Choke Coil 5 FKOB Series 5 PLA10 Series Standard Winding Type 6 PLA10 Series Sectional Winding Type 6 PLA10 Series (Safety Standard Recognized) Standard Winding Type 8 PLA10 Series (Safety Standard Recognized) Sectional Winding Type 8 PLH10 Series 10 PLH10 Series (Safety Standard Recognized) 11 Hybrid Choke Coil 12 PLY10 Series Standard Winding Type 12 PLY10 Series Sectional Winding Type 12 PLY10 Series (Safety Standard Recognized) Standard Winding Type 14 PLY10 Series (Safety Standard Recognized) Sectional Winding Type 14 PLY17 Series A Type 16 PLY17 Series B Type 16 PLY17 Series (Safety Standard Recognized) A Type 18 PLY17 Series (Safety Standard Recognized) B Type 18 Noise Suppression Effect of PLY10 Series 20 !Caution /Notice 21 Packaging 22 Recycled Paper 2 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering AC Line Filters (Part Number) PL A q w e r t 10 A S 152 2R0 y u R 2 B i o !0 yInductance qProduct ID Product ID PL Common Mode Choke Coils Code Type wType A AC Standard Type H AC High-frequency Type Y AC Hybrid Choke Coils Type eApplications Expressed by three figures. The unit is micro-henry (µH). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. If inductance is less than 0.1 µH, the inductance code is expressed by a combination of two figures and capital letter "N", and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. uRated Current Code Applications 10 for AC Line 17 Expressed by three figures. The unit is in amperes (A). A decimal point is expressed by the capital letter "R". In this case, all figures are significant digits. iWinding Mode rStructure Code Winding Mode Code Structure A Parallel Winding Type A Core Vertical Type B Parallel Winding Type (High Performance Type) B Core Horizontal Type D Sectional Winding Type tFeatures Code Features S Safety Recognized N General Use R Standard Type P Single Layer Winding Type oLead Dimensions Code Lead Dimensions 2 3.5mm !0Packaging Code Packaging B Bulk M Magazine Package • Please contact us for FKOB series. 2 Series All series PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines performance of total filter block MURATA provides two types of common mode chokes. (Standard type, High frequency type) Hybrid choke coil is high performance EMI suppression device which can suppress both common mode noise and differential mode noise at the same time. It is effective in AC power supplies with active device for higher harmonic countermeasure, which tend to emit relatively higher differential mode noise. EMI (Electro Magnetic Interference) suppression filter for AC power lines eliminate noise entering equipment from commercial power lines or noise generated from electronic equipment. Common mode chokes, line bypass capacitors, across the line capacitors are generally used as AC EMI suppression filter device. In suppressing common mode noise, common mode chokes are most important devices. Because the characteristics of common mode chokes influences ■ Classification of EMI Suppression Filter for AC Power Lines Effective Frequency Range (Hz) Appearance Product Name 10k Common Mode Choke Coil 100k 1M 10M 100M Application 1G Standard Type Suppression of general common mode noise FKOB PLA10 High Frequency Type Suppression of common mode noise contains high frequency noise above 10MHz PLH10 Hybrid Choke Coil Suppression of conduction noise in AC power line with active device for higher harmonic countermeasure. Suppression of AC power line noise which contains both PLY10 common mode noise and differential mode noise. Hybrid Choke Coil For AC power supply, AC adaptor. Set for low profile equipment. PLY17 3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines ■ Common Mode Choke Coil Standard Winding and Sectional Winding Standard Winding End of Winding 36 19 18 1 35 20 17 2 34 21 16 3 33 22 15 4 32 23 14 5 31 24 13 6 30 25 12 7 29 26 11 8 28 27 10 9 Beginning of Winding High-frequency noise can pass through the Filter easily because both edges of coils are close as shown above Standard Winding Large inductance is available →Highly Efficient in Low Frequency Sectional Winding Excellent performance in high frequency Stray capacity between windings is low 0 Sectional Winding 15 10 7 2 End of Winding 14 11 6 3 13 12 5 4 32 25 24 17 31 26 23 18 30 27 22 19 29 28 21 20 Beginning of Winding High-frequency noise can hardly pass through the Filter because both edges of coil are not close as shown above Insertion Loss (dB) 16 9 8 1 20 (Standard Winding) 40 (Sectional Winding) 60 80 0.01 0.1 1 Frequency (MHz) 10 100 ■ Noise Measures for Switching Power Supply Common Mode Choke Coil suppresses Common Mode Noise Noise are generated from Common Mode Noise Switching Power Supply Differential Mode Noise Line Bypass Capacitor (Y Capacitor) suppresses Common Mode Noise Differential Mode Choke Coil suppresses Differential Mode Noise Switching Power Supply PLA10/PLH10 Across the Line Capacitor (X Capacitor) suppresses Differential Mode Noise 4 Differential Mode Choke Coil suppresses Differential Mode Noise Across the Line Capacitor (X Capacitor) suppresses Differential Mode Noise Load PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines 1 Common Mode Choke Coil 8±0.5 3 The FKOB series is compact size AC common mode choke coil which uses troidal type ferrite core. Its broad band frequency characteristic enables simple filter composition in relative low noise equipments. 4 FKOB Series 1 2 ø23 max. 10±2 17 max. 10±0.5 (in mm) 13±0.5 3 4 FKOB160MH02/25/23/26/24 1 2 ø23 max. 4.5±1 17 max. 10±0.5 FKOB160MH06/13/14/16/15 (in mm) Common Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) FKOB160MH02 250 2.5 250 100 FKOB160MH06 250 2.5 250 100 FKOB160MH13 600 2.5 250 100 FKOB160MH25 600 2.5 250 100 FKOB160MH14 800 2.5 250 100 FKOB160MH23 800 2.5 250 100 FKOB160MH16 1000 1.5 250 100 FKOB160MH26 1000 1.5 250 100 FKOB160MH15 1500 1.5 250 100 FKOB160MH24 1500 1.5 250 100 Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -20°C to 95°C ■ Equivalent Circuit Diagram Winding Temperature Rise (at Rated Current) (max.): 35K ■ Insertion Loss-Frequency Characteristics 0 10 N1 (2) N1 : N2 = 1 : 1 (4) N2 Insertion Loss (dB) 02, 06 (1) 20 13, 14, 23, 25 30 16, 26 40 15, 24 50 (3) 60 70 0.1 0.5 1 5 10 50 100 Frequency (MHz) 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 PLA10 Series 16 max. 18 max. 17.5 max. The PLA10 series is a compact size AC common mode choke coil. It can obtain a high inductance value in spite of its compact size. 1. Compact and light weight 2. Low profile in vertical core layout 3. Both a standard winding type and a sectional winding type for higher frequency noise are available. 3.5±1 ■ Features 13±0.5 Standard Winding Type ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 3.5±1 17.5 max. 18 max. 13±0.5 Sectional Winding Type ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) o Standard Winding Type Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA10AN1522R0R2 1.5 2.0 300 100 PLA10AN1821R7R2 1.8 1.7 300 100 PLA10AN2221R5R2 2.2 1.5 300 100 PLA10AN3021R3R2 3.0 1.3 300 100 PLA10AN3521R2R2 3.5 1.2 300 100 PLA10AN5521R0R2 5.5 1.0 300 100 PLA10AN7420R8R2 7.4 0.8 300 100 PLA10AN1030R7R2 10.0 0.7 300 100 PLA10AN1230R6R2 12.0 0.6 300 100 PLA10AN2030R5R2 20.0 0.5 300 100 PLA10AN3030R4R2 30.0 0.4 300 100 PLA10AN4330R3R2 43.0 0.3 300 100 Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA10AN9012R0D2 0.9 2.0 300 100 PLA10AN1321R7D2 1.3 1.7 300 100 PLA10AN1821R5D2 1.8 1.5 300 100 PLA10AN2021R3D2 2.0 1.3 300 100 PLA10AN3621R0D2 3.6 1.0 300 100 PLA10AN7720R7D2 7.7 0.7 300 100 PLA10AN1330R5D2 13.0 0.5 300 100 PLA10AN2230R4D2 22.0 0.4 300 100 PLA10AN3630R3D2 36.0 0.3 300 100 Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C 6 Winding Temperature Rise (at Rated Current) (max.): 60K PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit Diagram (1) 1 (2) N1 N1 : N2 = 1 : 1 N2 (4) (3) ■ Insertion Loss-Frequency Characteristics Standard Winding Type Sectional Winding Type 0 0 PLA10AN1522R0R2 PLA10AN1821R7R2 PLA10AN2221R5R2 PLA10AN3021R3R2 PLA10AN3521R2R2 PLA10AN5521R0R2 40 PLA10AN7420R8R2 PLA10AN1030R7R2 PLA10AN1230R6R2 PLA10AN2030R5R2 PLA10AN3030R4R2 PLA10AN4330R3R2 60 80 0.01 0.1 1 Frequency (MHz) PLA10AN9012R0D2 PLA10AN1321R7D2 PLA10AN1821R5D2 PLA10AN2021R3D2 20 Insertion Loss (dB) Insertion Loss (dB) 20 10 40 PLA10AN3621R0D2 PLA10AN7720R7D2 PLA10AN1330R5D2 PLA10AN2230R4D2 PLA10AN3630R3D2 60 100 80 0.01 0.1 1 10 100 Frequency (MHz) 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 PLA10 Series (Safety Standard Recognized) 16 max. 18 max. ■ Features 3.5±1 17.5 max. 1. Compact and light weight 2. Low profile in vertical core layout 3. Both a standard winding type and a sectional winding type for higher frequency noise are available. 4. Safety standards: EN60065 13±0.5 ■ Applications Standard Winding Type Noise suppression of AC power lines ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 3.5±1 17.5 max. 18 max. 13±0.5 Sectional Winding Type ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) o Standard Winding Type Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA10AS1522R0R2 1.5 2.0 250 100 PLA10AS1821R7R2 1.8 1.7 250 100 PLA10AS2221R5R2 2.2 1.5 250 100 PLA10AS3021R3R2 3.0 1.3 250 100 PLA10AS3521R2R2 3.5 1.2 250 100 PLA10AS5521R0R2 5.5 1.0 250 100 PLA10AS7420R8R2 7.4 0.8 250 100 PLA10AS1030R7R2 10.0 0.7 250 100 PLA10AS1230R6R2 12.0 0.6 250 100 PLA10AS2030R5R2 20.0 0.5 250 100 PLA10AS3030R4R2 30.0 0.4 250 100 PLA10AS4330R3R2 43.0 0.3 250 100 Part Number Operating Temperature Range : -25°C to 60°C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Common Mode Inductance (min.) (mH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLA10AS9012R0D2 0.9 2.0 250 100 PLA10AS1321R7D2 1.3 1.7 250 100 PLA10AS1821R5D2 1.8 1.5 250 100 PLA10AS2021R3D2 2.0 1.3 250 100 PLA10AS3621R0D2 3.6 1.0 250 100 PLA10AS7720R7D2 7.7 0.7 250 100 PLA10AS1330R5D2 13.0 0.5 250 100 PLA10AS2230R4D2 22.0 0.4 250 100 PLA10AS3630R3D2 36.0 0.3 250 100 Part Number Operating Temperature Range : -25°C to 60°C 8 Winding Temperature Rise (at Rated Current) (max.): 60K PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit Diagram (1) 1 (2) N1 N1 : N2 = 1 : 1 N2 (4) (3) ■ Insertion Loss-Frequency Characteristics Standard Winding Type Sectional Winding Type 0 0 PLA10AS1522R0R2 PLA10AS1821R7R2 PLA10AS2221R5R2 PLA10AS3021R3R2 PLA10AS3521R2R2 PLA10AS5521R0R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 PLA10AS7420R8R2 PLA10AS1030R7R2 PLA10AS1230R6R2 PLA10AS2030R5R2 PLA10AS3030R4R2 PLA10AS4330R3R2 60 80 0.01 0.1 1 Frequency (MHz) PLA10AS9012R0D2 PLA10AS1321R7D2 PLA10AS1821R5D2 PLA10AS2021R3D2 PLA10AS3621R0D2 PLA10AS7720R7D2 10 40 60 PLA10AS1330R5D2 PLA10AS2230R4D2 PLA10AS3630R3D2 100 80 0.01 0.1 1 10 100 Frequency (MHz) 9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PLH10 Series 16 max. 18 max. 17.5 max. The PLH10 series is a common mode choke coil for high frequency use. The same dimensions as the PLA10 series enables flexible design. ■ Features 1. High performance in high frequency range 2. Low profile in vertical core layout 3. Compact and light weight 3.5±1 ø0.9 max. 13±0.5 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) Common Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLH10AN7003R6P2 70 3.6 300 100 PLH10AN1112R6P2 110 2.6 300 100 PLH10AN1612R1P2 160 2.1 300 100 PLH10AN2211R5P2 220 1.5 300 100 PLH10AN2911R2P2 290 1.2 300 100 PLH10AN3711R0P2 370 1.0 300 100 Part Number Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C ■ Equivalent Circuit Diagram Winding Temperature Rise (at Rated Current) (max.): 60K ■ Insertion Loss-Frequency Characteristics 0 PLH10AN7003R6P2 PLH10AN1112R6P2 PLH10AN1612R1P2 10 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 Insertion Loss (dB) 1 20 30 PLH10AN2211R5P2 PLH10AN2911R2P2 PLH10AN3711R0P2 (3) 40 50 0.1 1.0 10 Frequency (MHz) 10 100 1000 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 PLH10 Series (Safety Standard Recognized) 16 max. 18 max. ■ Features 17.5 max. 1. High performance in high frequency range 2. Low profile in vertical core layout 3. Compact and light weight 4. Safety standards: EN60065 ■ Applications 3.5±1 ø0.9 max. Suppressing radiation noise in switching power supply and inverter (AC-AC converter) 13±0.5 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) Common Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (V) Insulation Resistance (min.) (M ohm) PLH10AS7003R6P2 70 3.6 250 100 PLH10AS1112R6P2 110 2.6 250 100 PLH10AS1612R1P2 160 2.1 250 100 PLH10AS2211R5P2 220 1.5 250 100 PLH10AS2911R2P2 290 1.2 250 100 PLH10AS3711R0P2 370 1.0 250 100 Part Number Operating Temperature Range : -25°C to 60°C Winding Temperature Rise (at Rated Current) (max.): 60K ■ Equivalent Circuit Diagram ■ Insertion Loss-Frequency Characteristics 0 PLH10AS7003R6P2 PLH10AS1112R6P2 PLH10AS1612R1P2 (1) N1 (2) N1 : N2 = 1 : 1 (4) N2 Insertion Loss (dB) 10 20 30 PLH10AS2211R5P2 PLH10AS2911R2P2 PLH10AS3711R0P2 (3) 40 50 0.1 1.0 10 100 1000 Frequency (MHz) 11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (EMIFILr) for AC Power Lines Hybrid Choke Coil PLY10 Series The PLY10 is a compact and high performance hybrid choke coil which can handle differential mode noise caused by the harmonics currents regulation circuit as well as common mode noise. It can handle noise problems much more compactly than a combination of a conventional common mode choke coil and a differential mode choke coil. 16 max. 3.5±1 17.5 max. 18 max. 13±0.5 ■ Features Standard Winding Type 1. PLY10 has both functions of a common mode choke coil and a differential mode choke coil in its compact body. 2. Low profile in vertical core layout 3. PLY10 has the same pin layout as a general type common mode choke coil which enables it to replace conventional components. 4. Both a standard winding type and a sectional winding type for higher frequency noise are available. 10±0.5 (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 17.5 max. 18 max. ■ EMI Problem for harmonics currents regulation There are some methods meet harmonics currents regulations (IEC1000-3, EN60555-2) such as an active filter type and one converter type. However, they cause new EMI problems of differential mode noise because they use active components. For that reason, additional filter components to meet differential mode noise must be applied. ø0.9 max. (1) 3.5±1 2 13±0.5 Sectional Winding Type ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) o Standard Winding Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10AN9012R0R2 0.9 65 2.0 300 PLY10AN1121R8R2 1.1 90 1.8 300 PLY10AN1521R6R2 1.5 110 1.6 300 PLY10AN2121R4R2 2.1 150 1.4 300 PLY10AN2821R2R2 2.8 190 1.2 300 PLY10AN4321R0R2 4.3 300 1.0 300 PLY10AN6220R8R2 6.2 400 0.8 300 PLY10AN8720R7R2 8.7 530 0.7 300 Part Number PLY10AN9920R6R2 9.9 690 0.6 300 PLY10AN1430R5R2 14.0 1000 0.5 300 Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10AN7012R0D2 0.7 50 2.0 300 PLY10AN1121R7D2 1.1 65 1.7 300 PLY10AN1421R4D2 1.4 110 1.4 300 Part Number Continued on the following page. 12 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10AN2321R2D2 2.3 160 1.2 300 PLY10AN3521R0D2 3.5 240 1.0 300 PLY10AN4420R8D2 4.4 320 0.8 300 PLY10AN8720R7D2 8.7 500 0.7 300 PLY10AN9720R6D2 9.7 670 0.6 300 PLY10AN1130R5D2 11.0 840 0.5 300 PLY10AN2430R4D2 24.0 1800 0.4 300 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C 2 Winding Temperature Rise (at Rated Current) (max.): 60K ■ Equivalent Circuit Diagram Differential Mode Inductor (1) (2) (4) (3) Common Mode Inductor ■ Common Mode Insertion Loss-Frequency Characteristics Standard Winding Type Sectional Winding Type 0 0 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 PLY10AN2121R4R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 60 80 0.01 0.1 1 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 PLY10AN3521R0D2 10 40 60 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 PLY10AN2430R4D2 80 0.01 100 0.1 Frequency (MHz) 1 10 100 Frequency (MHz) ■ Differential Mode Insertion Loss-Frequency Characteristics Standard Winding Type Sectional Winding Type 0 0 PLY10AN7012R0D2 PLY10AN1121R7D2 PLY10AN1421R4D2 PLY10AN2321R2D2 PLY10AN9012R0R2 PLY10AN1121R8R2 PLY10AN1521R6R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 60 80 0.01 PLY10AN2121R4R2 PLY10AN2821R2R2 PLY10AN4321R0R2 PLY10AN6220R8R2 PLY10AN8720R7R2 PLY10AN9920R6R2 PLY10AN1430R5R2 0.1 40 60 1 Frequency (MHz) 10 100 80 0.01 PLY10AN3521R0D2 PLY10AN4420R8D2 PLY10AN8720R7D2 PLY10AN9720R6D2 PLY10AN1130R5D2 PLY10AN2430R4D2 0.1 1 10 100 Frequency (MHz) 13 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PLY10 Series (Safey Standard Recognized) 16 max. 3.5±1 17.5 max. 18 max. 13±0.5 ■ Features Standard Winding Type 1. PLY10 has both functions of a common mode choke coil and a differential mode choke coil in its compact body. 2. Low profile in vertical core layout 3. PLY10 has the same pin layout as a general type common mode choke coil which enables it to replace conventional components. 4. Safety standards: EN60065 ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) 16 max. 17.5 max. 18 max. ■ EMI Problem for harmonics currents regulation There are some methods meet harmonics currents regulations (IEC1000-3, EN60555-2) such as an active filter type and one converter type. However, they cause new EMI problems of differential mode noise because they use active components. For that reason, additional filter components to meet differential mode noise must be applied. 3.5±1 2 The PLY10 is a compact and high performance hybrid choke coil which can handle differential mode noise caused by the harmonics currents regulation circuit as well as common mode noise. It can handle noise problems much more compactly than a combination of a conventional common mode choke coil and a differential mode choke coil. 13±0.5 Sectional Winding Type ø0.9 max. 10±0.5 (1) (4) (4) (3) [(2)] [(3)] [(1)] [(2)] (in mm) o Standard Winding Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10AS9012R0R2 0.9 65 2.0 300 PLY10AS1121R8R2 1.1 90 1.8 300 PLY10AS1521R6R2 1.5 110 1.6 300 PLY10AS2121R4R2 2.1 150 1.4 300 PLY10AS2821R2R2 2.8 190 1.2 300 PLY10AS4321R0R2 4.3 300 1.0 300 PLY10AS6220R8R2 6.2 400 0.8 300 PLY10AS8720R7R2 8.7 530 0.7 300 PLY10AS9920R6R2 9.9 690 0.6 300 PLY10AS1430R5R2 14.0 1000 0.5 300 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K o Sectional Winding Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY10AS7012R0D2 0.7 50 2.0 300 PLY10AS1121R7D2 1.1 65 1.7 300 PLY10AS1421R4D2 1.4 110 1.4 300 PLY10AS2321R2D2 2.3 160 1.2 300 PLY10AS3521R0D2 3.5 240 1.0 300 PLY10AS4420R8D2 4.4 320 0.8 300 PLY10AS8720R7D2 8.7 500 0.7 300 PLY10AS9720R6D2 9.7 670 0.6 300 PLY10AS1130R5D2 11.0 840 0.5 300 PLY10AS2430R4D2 24.0 1800 0.4 300 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C 14 Winding Temperature Rise (at Rated Current) (max.): 60K PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit Diagram Differential Mode Inductor (1) (2) 2 (4) (3) Common Mode Inductor ■ Common Mode Insertion Loss-Frequency Characteristics Standard Winding Type Sectional Winding Type 0 0 PLY10AS9012R0R2 PLY10AS1121R8R2 PLY10AS1521R6R2 PLY10AS2121R4R2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 PLY10AS2821R2R2 PLY10AS4321R0R2 PLY10AS6220R8R2 PLY10AS8720R7R2 PLY10AS9920R6R2 PLY10AS1430R5R2 60 80 0.01 0.1 1 PLY10AS7012R0D2 PLY10AS1121R7D2 PLY10AS1421R4D2 PLY10AS2321R2D2 PLY10AS3521R0D2 PLY10AS4420R8D2 10 40 60 PLY10AS8720R7D2 PLY10AS9720R6D2 PLY10AS1130R5D2 PLY10AS2430R4D2 80 0.01 0.1 100 Frequency (MHz) 1 10 100 Frequency (MHz) ■ Differential Mode Insertion Loss-Frequency Characteristics Standard Winding Type Sectional Winding Type 0 0 PLY10AS9012R0R2 PLY10AS1121R8R2 PLY10AS1521R6R2 PLY10AS7012R0D2 PLY10AS1121R7D2 PLY10AS1421R4D2 20 Insertion Loss (dB) Insertion Loss (dB) 20 40 60 80 0.01 PLY10AS2121R4R2 PLY10AS2821R2R2 PLY10AS4321R0R2 PLY10AS6220R8R2 PLY10AS8720R7R2 PLY10AS9920R6R2 PLY10AS1430R5R2 0.1 40 60 1 Frequency (MHz) 10 100 80 0.01 PLY10AS2321R2D2 PLY10AS3521R0D2 PLY10AS4420R8D2 PLY10AS8720R7D2 PLY10AS9720R6D2 PLY10AS1130R5D2 PLY10AS2430R4D2 0.1 1 10 100 Frequency (MHz) 15 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PLY17 Series 22.5±0.5 15.0±0.5 12.5±0.5 (4) [(1)] 24.5±0.5 1. Integration of choke coil function to suppress differential mode/Low and High Frequency common mode noise. 2. Low Profile (H=<13mm) ■ Applications 1. For AC power supply, AC adapter 2. Low profile equipment such as lighting equipment, FPD, Digital Amplifier ø1.0 max. A/B Type (1) 12.5±0.5 (4) [(2)] [(3)] 3.5±0.5 2 (3) [(2)] ■ Features (in mm) o A Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17BN4912R4A2 0.49 18 2.4 300 PLY17BN9612R0A2 0.96 36 2.0 300 PLY17BN1023R0A2 1.0 36 3.0 300 PLY17BN1121R8A2 1.1 44 1.8 300 PLY17BN1721R5A2 1.7 67 1.5 300 PLY17BN2921R2A2 2.9 110 1.2 300 PLY17BN3721R0A2 3.7 140 1.0 300 PLY17BN5620R8A2 5.6 210 0.8 300 PLY17BN7820R7A2 7.8 290 0.7 300 PLY17BN9320R6A2 9.3 350 0.6 300 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K o B Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17BN4912R4B2 0.49 24 2.4 300 PLY17BN9612R0B2 0.96 47 2.0 300 PLY17BN1023R0B2 1.0 47 3.0 300 PLY17BN1121R8B2 1.1 58 1.8 300 PLY17BN1721R5B2 1.7 88 1.5 300 PLY17BN2921R2B2 2.9 140 1.2 300 PLY17BN3721R0B2 3.7 180 1.0 300 PLY17BN5620R8B2 5.6 280 0.8 300 PLY17BN7820R7B2 7.8 390 0.7 300 PLY17BN9320R6B2 9.3 460 0.6 300 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C 16 Winding Temperature Rise (at Rated Current) (max.): 60K PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit Diagram ■ Common Mode Insertion Loss-Frequency Characteristics 0 PLY17BN9612R0-2 PLY17BN4912R4-2 PLY17BN1023R0-2 (1) Insertion Loss (dB) 20 (2) (4) (3) 2 40 PLY17BN9320R6-2 PLY17BN7820R7-2 PLY17BN5620R8-2 PLY17BN3721R0-2 60 PLY17BN2921R2-2 PLY17BN1721R5-2 PLY17BN1121R8-2 80 0.01 0.1 1 10 100 10 100 Frequency (MHz) ■ Differential Mode Insertion Loss-Frequency Characteristics PLY17BN***B2 0 20 20 40 60 80 0.01 Insertion Loss (dB) Insertion Loss (dB) PLY17BN***A2 0 PLY17BN9320R6A2 PLY17BN7820R7A2 PLY17BN5620R8A2 PLY17BN3721R0A2 PLY17BN2921R2A2 PLY17BN1721R5A2 PLY17BN1121R8A2 PLY17BN9612R0A2 PLY17BN4912R4A2 PLY17BN1023R0A2 0.1 40 60 1 Frequency (MHz) 10 100 80 0.01 PLY17BN9320R6B2 PLY17BN7820R7B2 PLY17BN5620R8B2 PLY17BN3721R0B2 PLY17BN2921R2B2 PLY17BN1721R5B2 PLY17BN1121R8B2 PLY17BN9612R0B2 PLY17BN4912R4B2 PLY17BN1023R0B2 0.1 1 Frequency (MHz) 17 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. PLY17 Series (Safety Standard Recognized) 22.5±0.5 15.0±0.5 12.5±0.5 (4) [(1)] 24.5±0.5 1. Integration of choke coil function to suppress differential mode/Low and High Frequency common mode noise. 2. Low Profile (H=<13mm) 3. Safety standards: EN60065 ■ Applications ø1.0 max. 1. For AC power supply, AC adapter 2. Low profile equipment such as lighting equipment, FPD, Digital Amplifier A/B Type (1) 12.5±0.5 (4) [(2)] [(3)] 3.5±0.5 2 (3) [(2)] ■ Features (in mm) o A Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17BS4912R4A2 0.49 18 2.4 250 PLY17BS9612R0A2 0.96 36 2.0 250 PLY17BS1023R0A2 1.0 36 3.0 250 PLY17BS1121R8A2 1.1 44 1.8 250 PLY17BS1721R5A2 1.7 67 1.5 250 PLY17BS2921R2A2 2.9 110 1.2 250 PLY17BS3721R0A2 3.7 140 1.0 250 PLY17BS5620R8A2 5.6 210 0.8 250 PLY17BS7820R7A2 7.8 290 0.7 250 PLY17BS9320R6A2 9.3 350 0.6 250 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K o B Type Common Mode Inductance (min.) (mH) Normal Mode Inductance (min.) (µH) Rated Current (A) Rated Voltage (Vac) PLY17BS4912R4B2 0.49 24 2.4 250 PLY17BS9612R0B2 0.96 47 2.0 250 PLY17BS1023R0B2 1.0 47 3.0 250 PLY17BS1121R8B2 1.1 58 1.8 250 PLY17BS1721R5B2 1.7 88 1.5 250 PLY17BS2921R2B2 2.9 140 1.2 250 PLY17BS3721R0B2 3.7 180 1.0 250 PLY17BS5620R8B2 5.6 280 0.8 250 PLY17BS7820R7B2 7.8 390 0.7 250 PLY17BS9320R6B2 9.3 460 0.6 250 Part Number Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C 18 Winding Temperature Rise (at Rated Current) (max.): 60K PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ■ Equivalent Circuit Diagram ■ Common Mode Insertion Loss-Frequency Characteristics 0 PLY17BS9612R0-2 PLY17BS4912R4-2 PLY17BS1023R0-2 (1) Insertion Loss (dB) 20 (2) (4) (3) 2 40 PLY17BS9320R6-2 PLY17BS7820R7-2 PLY17BS5620R8-2 PLY17BS3721R0-2 60 PLY17BS2921R2-2 PLY17BS1721R5-2 PLY17BS1121R8-2 80 0.01 0.1 1 10 100 10 100 Frequency (MHz) ■ Differential Mode Insertion Loss-Frequency Characteristics PLY17BS***B2 0 20 20 40 60 80 0.01 Insertion Loss (dB) Insertion Loss (dB) PLY17BS***A2 0 PLY17BS9320R6A2 PLY17BS7820R7A2 PLY17BS5620R8A2 PLY17BS3721R0A2 PLY17BS2921R2A2 PLY17BS1721R5A2 PLY17BS1121R8A2 PLY17BS9612R0A2 PLY17BS4912R4A2 PLY17BS1023R0A2 0.1 40 60 1 Frequency (MHz) 10 100 80 0.01 PLY17BS9320R6B2 PLY17BS7820R7B2 PLY17BS5620R8B2 PLY17BS3721R0B2 PLY17BS2921R2B2 PLY17BS1721R5B2 PLY17BS1121R8B2 PLY17BS9612R0B2 PLY17BS4912R4B2 PLY17BS1023R0B2 0.1 1 Frequency (MHz) 19 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Noise Suppression Effect of PLY10 Series The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC) 2 Common mode choke coil and differentical mode choke coil are used. 0.33µF 0.1µF 24mH 680µH Hybrid choke coil PLY10 0.33µF 1000pF 0.1µF 1000pF PLY10A1130R5D • Noise Level The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact composition. 90 80 80 70 70 60 50 60 50 40 40 30 30 20 0.5 20 Hybrid choke coil PLY10 90 Noise Level (dBµV) Noise Level (dBµV) Common mode choke coil and differencial mode choke coil are used. 1 5 10 Frequency (MHz) 30 20 0.5 1 5 10 Frequency (MHz) 30 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution /Notice ■ !Caution (Rating) 1. Rated Current Operating current should not exceed the rated value. Even if operating current is under the rated value, adequate ventilation is required to avoid excessive heat generated within the product (choke coil) and from surrounding heat sources. If exceeding these conditions, excessive heat may cause fumes or permanent damage to the product. Please ensure that product (choke coil) is evaluated and confirmed against the specification when it is mounted in your final assembled product. -> Winding temperature should be less than 120 degree C. *As for FKOB series winding temperature should be less than 95 degree C. Maximum allowable temperature at the surface of coil (ambient temperature + winding temperature rise) is in accordance with each safety standard applicable to final assembled product. When the temperature at winding exceeds maximum allowable temperature of safety standard, the rated current should be derated. 2. Inrush Current Inrush current should not exceed 10 times rated current within 1/4 cycle of 50/60Hz commercial power line. Inrush current should be limited to a minimum of 10 seconds after last inrush. 2 If these conditions are exceeded, excessive heat may cause fumes or permanent damage to the component, or at worst cause ignition. ■ Notice (Storage and Operating Condition) 1. Soldering Conditions (1) Flux, Solder 2. Cleaning · Rosin-based flux should be used. Do not use strong acidic flux with halide content exceeding 0.2wt% (chlorine conversion value) · Use 63/37 solder (Sn/Pb = 63/37) or 60/40 solder (Sn/Pb = 60/40). In case of lead-free solder, use Sn-3.0Ag-0.5Cu solder (2) Flow soldering profile Pre-heating Soldering Temperature (°C) 300 200 150 150°C 100 50 60s min. Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. Soldering time Standard profile Product should be used within 12 months after receiving. Solderability should be checked if this period is exceeded. (2) Storage conditions Storage Temperature: -10 to 40 °C Relative humidity: 30 to 70% Avoid sudden changes in temperature and humidity. Don't keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidation of lead terminals resulting in poor solderability or corrosion of component windings. (3) Handling conditions Gradual cooling (in air) Soldering temperature 250 Avoid cleaning product due to non-waterproof construction. 3. Storage and Handling Requirements (1) Storage period Limit profile Sn/Pb = 60/40, Sn/Pb = 63/37 Sn-3.0Ag-0.5Cu solder Soldering temp. Soldering time Soldering temp. Soldering time Soldering temp. Soldering time Cycle of flow 240-260°C 5s max. 250±2°C 4-6s 265±3°C 5s 2 times For additional mounting methods, please contact Murata. ■ Notice (Soldering and Mounting) ■ Notice (Rating) Magnetic Flux Leakage Choke coils generate small amounts of magnetic flux leakage that may adversely affect equipment operation according to component arrangement. Testing should be completed on final assembly to ensure equipment performance is not affected. Coil Humming Noise Magnetic flux generated between coil and core or between the choke coil windings creates repulsive power between the coil windings. This repulsive power causes the coil winding to vibrate and create a humming noise. The amount of hum produced by the coil is proportionate to the amount of harmonic distortion generated by the operating current. This does not influence the electrical performance of the coils, but it should be considered and tested in actual circuit application. 21 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note C09E.pdf 06.2.9 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Packaging ■ Minimum Quantity Part Number 2 Minimum Quantity (pcs.) Magazine Package Box FKOB - 100 PLA10 1800 1260 PLH10 1800 1260 PLY10 1800 1200 PLY17 1920 1080 22 !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C09E.pdf 06.2.9 Note: 1. Export Control For customers outside Japan No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above 3. Product specifications in this catalog are as of January 2006. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]