MURATA TZY2Z100A001R00

!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer
Capacitors
Cat.No.T13E-13
T13E.pdf
08.8.27
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for EU RoHS Compliant
•
•
•
All the products in this catalog comply with EU RoHS.
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
1
Part Numbering
2
Selection Guide of Ceramic Trimmer Capacitor
3
1
TZR1 Series
4
2
TZS2 Series
8
3
TZY2 Series
12
4
TZV2 Series
16
5
TZC3 Series
20
2
3
4
6
TZW4 Series
24
7
TZB4 Series
27
8
TZ03 Series
32
5
Packaging
37
Recommended Adjustment Tools
39
Qualified Standards
41
6
7
8
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A.
Recycled Paper
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Ceramic Trimmer Capacitors
(Part Number)
TZ
Y2
R
200
A
001 R00
q
w
e
r
t
y
u
tTerminal Shape
qProduct ID
Code
Product ID
TZ
Trimmer Capacitors
wSeries/Terminal
TZC3, TZW4, TZB4 (SMD Type)
B
Top Adjustment: TZB4 (SMD Type)
Rear Adjustment: TZB4 (SMD Type)
Code
Series/Terminal
E
03
6mm Size Lead Type
F
Top Adjustment: TZ03 (Lead Type)
B4
4mm Size SMD Type
N
Rear Adjustment: TZ03 (Lead Type)
W4
4mm Size SMD Type
C3
3mm Size SMD Type
S2
2mm Size SMD Type (Height 1.0mm)
Y2
2mm Size SMD Type (Height 1.25mm)
Code
Individual Specifications
V2
2mm Size SMD Type (Height 1.45mm)
001
TZR1, TZS2, TZY2, TZW4 Standard Type
R1
1mm Size SMD Type (Height 0.90mm)
110
TZV2, TZC3 Standard Type
eTemperature Characteristics
Please refer to dimensions for terminals in detail.
yIndividual Specifications
169
TZ03 Standard Type
A10
TZB4 No-cover Film Standard Type
B10
TZB4 with Cover Film Standard Type
Code
Temperature Characteristics
Z
NP0ppm/°C
R
N750ppm/°C
K
N1000ppm/°C
Code
Packaging
P
N1200ppm/°C
B00
Bulk
R00
Reel (Taping ø180mm)
R01*
Reel (Taping ø330mm)
Please refer to ratings for tolerance of temperature characteristics.
rMaximum Capacitance
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
2
A
Terminal Shape
Top Adjustment: TZR1, TZS2, TZY2, TZV2,
uPackaging
* Only TZB4.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide of Ceramic Trimmer Capacitor
Start
Mounting Method
Surface Mount
PCB Insertion
Soldering Method
Reflow
Height 0.90mm max.
1.5(W) x 1.7(L)
Height 1.7mm max.
3.2(W) x 4.5(L)
TZR1
TZC3
Height 1.00mm max.
2.2(W) x 2.7(L)
Height 3.2mm max.
4.0(W) x 4.5(L)
TZS2
TZB4_A
Flow
Manual Insertion
Height 3.2mm max.
4.0(W) x 4.5(L)
Height 5.3mm max.
6.0(W) x 6.0(L)
TZB4_A
(with cover film)
TZ03_F
TZB4_B
(with cover film)
TZ03_N
Height 1.25mm max.
2.5(W) x 3.2(L)
TZB4_B
TZB4_E
(with cover film)
TZY2
Height 1.45mm max.
2.3(W) x 3.2(L)
TZB4_E
TZV2
High Frequency Power
Height 2.6mm max.
4.2(W) x 5.2(L)
TZW4
All products of Ceramic Trimmer Capacitor comply with RoHS and ELV
3
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
1
TZR1 Series
1.7
■ Features
0.9 max.
1.5
(Depth;0.15)
0.45
0.2
1. Ultra-small and thin with external dimensions
of 1.5(W)x1.7(L)x0.85(H)mm
(80% less in volume than the current product).
2. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance
after reflow soldering.
3. Suitable for high frequency circuit due to high
self resonant frequency (6.2GHz of TZR1Z010 at
1.0pF setting)
0.35
( Tolerance:in ±0.1
mm )
■ Applications
1. "Bluetooth"
2. Crystal oscillators
3. Crystal filters
4. Hand radios
5. Miniature tuner packs (FM Radio, TV)
6. Remote keyless entry systems
7. Pagers
C min. (max.)
(pF)
C max.
(pF)
TC
Q
Rated
Voltage
Withstanding
Voltage
TZR1Z010A001
0.55
1.0 +100/-0%
NP0±300ppm/°C
200min. at 200MHz, Cmax.
25Vdc
55Vdc
TZR1Z1R5A001
0.7
1.5 +100/-0%
NP0±300ppm/°C
200min. at 200MHz, Cmax.
25Vdc
55Vdc
TZR1Z040A001
1.5
4.0 +100/-0%
NP0±500ppm/°C
300min. at 1MHz, Cmax.
25Vdc
55Vdc
TZR1R080A001
3.0
8.0 +100/-0%
N750±500ppm/°C
300min. at 1MHz, Cmax.
25Vdc
55Vdc
Part Number
Insulation Resistance: 10000M ohm
Torque: 0.1 to 1.0mNm
Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
4
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZR1Z010
-25
0
-10
Z1R5 (NP0±300 ppm/°C)
Cap. Change (%)
Cap. Change (%)
Z010 (NP0±300 ppm/°C)
+8
+6
+4
+2
65
0
85
0
-10
45
-4
+8
+6
+4
+2
45
-4
Temp. (°C)
Temp. (°C)
-6
-8
-8
-10
-10
-12
-12
TZR1Z040
TZR1R080
R080 (N750±500 ppm/°C)
Cap.Change (%)
Cap.Change (%)
Z040 (NP0±500 ppm/°C)
+8
+6
+4
+2
0
−2
+6
+4
20
Temp.(°C)
+2
20
−25
−10
45
85
65
0
−2
0
45
−4
+8
85
65
0
−10
85
20
-2
-6
−25
65
0
-25
20
-2
1
TZR1Z1R5
−4
Temp.(°C)
−6
−6
−8
−8
−10
−10
−12
−12
■ Frequency Characteristics
TZR1Z010
TZR1Z1R5
Z010
10000
10000
1000
1000
100
Z1R5
100
0.55pF set
0.7pF set
Q
Q
10
10
1.0pF set
1.5pF set
1
2
4
6
Frequency (GHz)
8
2
4
6
Frequency (GHz)
TZR1R080
Z040
R080
1000
100
1000
100
Q
10
10
500
0
TZR1Z040
1000
1
0
10
1000 1500 2000
Frequency (MHz)
2500
8
10
1000
100
100
10
10
Q
1
500
1000
1500
Frequency (MHz)
Capacitance(pF)
0
Capacitance(pF)
0
1
2000
Continued on the following page.
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Land Pattern
2.2
0.5
1.2
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T4
T3
T2
Temperature (°C)
Temperature (°C)
1
T1
t2
Limit Profile
t3
Standard Profile
t1
T3
T2
t1
time (s)
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
Pre-heating
Heating
Cycle
of reflow
1 time
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Soldering and Mounting)
1. Soldering
(1) TZR1 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
1
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breaking.
(3) Use the suitable dimension of the pick-up nozzle
(1.1-1.2mm external diameter and 0.8-0.9mm bore
diameter).
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
*Recommended screwdriver for manual adjustment
MURATA: KMDR160
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 0.5 N [Ref: 50gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
7
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZS2 Series
2.7
2.2
1. Ultra-small and thin type with external dimensions
of 2.2(W)x2.7(L)x0.95(H)mm
(30% less in volume from the current product).
2. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance
after reflow soldering.
3. Pierced square hole allows for high resistance to
tuning force and in-process automatic adjustment.
1.0
0.6
0.20 Depth
■ Features
1.0max.
2
0.4
Tolerance: ±0.1
in mm
■ Applications
1. Crystal oscillators
2. Crystal filters
3. Hand radios
4. Cordless telephones
5. Cellular telephones 6. Tuner packs
7. Pagers
8. Remote keyless entry systems
9. PHS
10. Radar detectors
11. W-LAN
12. Compact radios
13. Headphone stereos
Part Number
C min. (max.)
(pF)
C max.
(pF)
TC
Q
Rated
Voltage
Withstanding
Voltage
TZS2Z060A001
3.0
6.0 +100/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZS2Z100A001
3.5
10.0 +100/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZS2R200A001
7.0
20.0 +100/-0%
N750±500ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
Insulation Resistance: 10000M ohm
Torque: 0.5 to 5.0mNm
Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
8
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZS2Z060
TZS2Z100
Z100 (NP0±300 ppm/°C)
Cap.Change (%)
Cap.Change (%)
Z060 (NP0±300 ppm/°C)
+8
+6
+4
+2
65
0
−25
−10
+4
−10
45
0
65
20
−2
2
Temp.(°C)
0
−25
−4
+6
+2
85
20
−2
0
+8
85
45
−4
Temp.(°C)
−6
−6
−8
−8
−10
−10
−12
−12
TZS2R200
Cap.Change (%)
R200 (N750±500 ppm/°C)
+8
+6
+4
+2
20
−25
−10
0
Temp.(°C)
45
65
85
0
−2
−4
−6
−8
−10
−12
■ Frequency Characteristics
TZS2Z060
TZS2Z100
Z100
1000
100
100
Q
10
1
10
1000
1000
100
100
10
10
Q
Capacitance (pF)
1000
Capacitance (pF)
Z060
1
500
1000
1500
Frequency (MHz)
2000
200
400
600
800
1000
Frequency (MHz)
Continued on the following page.
9
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZS2R200
R200
1000
1000
100
100
10
10
2
Capacitance (pF)
Q
1
200
400
600
800
1000
Frequency (MHz)
■ Land Pattern
3.2
1.0
2.1
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T4
T3
T2
Temperature (°C)
Temperature (°C)
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
T1
t2
Limit Profile
t3
Standard Profile
t1
T3
T2
t1
time (s)
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
Cycle
of reflow
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
1 time
Pre-heating
Heating
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
Solder Iron
Standard Profile
10
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
2
■ Notice (Soldering and Mounting)
1. Soldering
(1) TZS2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower part
of the terminal only. Do not apply flux except
to the terminals. Excessive amounts of solder
and/or applying solder to the upper part of the
terminal may cause fixed metal rotor or contact
failure due to flux invasion into the movable
part and/or the contact point. The soldering
iron should not come in contact with the
monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.3mm bore
diameter).
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR050
(2) Recommended screwdriver bit for automatic
adjustment
MURATA: KMBT050
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
11
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZY2 Series
3.2±0.2
■ Features
1.0
0.95
1.25max.
2.5±0.2
1. Small and thin size with external dimensions
of 2.5(W)x3.2(L)x1.25max.(H)mm
2. New shape of cover can improve the flux invasion
compared with current products.
3. Improvement of the adhesion between rotor and
stator leads to superior stability.
4. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance
after reflow soldering.
5. Suitable for high frequency circuit due to high
self resonant frequency (4.8GHz of TZY2Z010 at
1.0pF setting)
0.5
1.4
3
0.45
(Tolerance:in±0.1
mm)
■ Applications
1. Crystal oscillators
2. Crystal filters
3. Pagers
4. Cordless telephones
5. PHS
6. Hand radios
7. Cellular telephones
8. Watches
9. Remote keyless entry systems
10. W-LAN
11. Radar detectors
12. Compact radios
13. DVDs
14. Burglarproof devices
15. Headphone stereos
C min. (max.)
(pF)
C max.
(pF)
TC
Q
Rated
Voltage
Withstanding
Voltage
TZY2Z010A001
0.5
1.0 +100/-0%
NP0±300ppm/°C
200min. at 200MHz, Cmax.
25Vdc
55Vdc
TZY2Z2R5A001
0.65
2.5 +100/-0%
NP0±300ppm/°C
200min. at 200MHz, Cmax.
25Vdc
55Vdc
TZY2Z030A001
1.5
3.0 +100/-0%
NP0±300ppm/°C
300min. at 1MHz, Cmax.
25Vdc
55Vdc
TZY2Z060A001
2.5
6.0 +100/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZY2Z100A001
3.0
10.0 +100/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZY2R200A001
4.5
20.0 +100/-0%
N750±500ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZY2R250A001
5.5
25.0 +100/-0%
N750±500ppm/°C
300min. at 1MHz, Cmax.
25Vdc
55Vdc
TZY2K450A001
8.0
45.0 +100/-0%
N1000±500ppm/°C
300min. at 1MHz, Cmax.
25Vdc
55Vdc
Part Number
Insulation Resistance: 10000M ohm
Torque: 0.5 to 5.0mNm
■ Construction
Cover
Metal Rotor
Monolithic
Stator
12
Operating Temperature Range: -25 to +85°C
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZY2Z010
TZY2Z100
Z100 (NP0±300 ppm/°C)
Cap.Change (%)
Cap. Change (%)
Z010 (NP0±300 ppm/°C)
+8
+6
+4
+2
-10
0
+4
+2
Temp.(°C)
0
65
20
-2
+6
Temp. (°C)
0
-25
+8
85
−25
45
−10
-4
−2
0
65
20
85
45
−4
-6
−6
-8
−8
-10
−10
-12
−12
3
TZY2R200
TZY2K450
K450 (N1000±500ppm/°C)
+8
+6
+4
Temp.(°C)
+2
20
−25
−10
45
65
+10
+8
+6
+4
+2
20
85
0
−2
0
+12
Cap. Change (%)
Cap.Change (%)
R200 (N750±500 ppm/°C)
25
0
−4
45
65
Temp. (°C)
85
0
–2
–4
−6
–6
−8
−10
–8
−12
–10
–12
■ Frequency Characteristics
TZY2Z010
TZY2Z100
Z010
Z100
1000
1000
100
100
10
10
1000
100
Q
0.5pF set
Capacitance (pF)
Q
10
1.0pF set
1
0
2
4
Frequency (GHz)
6
8
1
200
400
600
800
1000
Frequency (MHz)
Continued on the following page.
13
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZY2R200
TZY2K450
R200
K450
1000
100
100
Capacitance (pF)
Q
10
3
1
1000
1000
100
100
10
10
Capacitance (pF)
1000
Q
10
200
400
600
800
1
1000
200
400
600
800
Frequency (MHz)
Frequency (MHz)
■ Land Pattern
4.0
1.2
2.4
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T4
T3
T2
Temperature (°C)
Temperature (°C)
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
T1
t2
Limit Profile
t3
Standard Profile
t1
T3
T2
t1
time (s)
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
Cycle
of reflow
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
1 time
Pre-heating
Heating
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
Solder Iron
Standard Profile
14
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
3
■ Notice (Soldering and Mounting)
1. Soldering
(1) TZY2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 120 micro m to 170 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.3mm bore
diameter).
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
ENGINEER INC.: DA-89
(Murata: KMDR060)
(2) Recommended screwdriver bit for automatic
adjustment
MURATA: KMBT060
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
15
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZV2 Series
3.2±0.2
0.5 Depth 0.2
■ Features
4
1.0
2.3±0.2
1. Small size with external dimensions of
2.3(W)x3.2(L)x1.45max.(H)mm
2. Unique construction with no plastic material
provides superior soldering heat resistance to
maintain excellent characteristic performance after
reflow soldering.
3. Designed for automatic placement in surface mount
applications.
4. Funnel shaped metal case enables in-process
automatic adjustment.
Marking(6pF)
1.4
1.45max.
Marking(10pF)
Tolerance: ±0.1
in mm
■ Applications
1. Crystal oscillator
3. Hand radios
5. Cellular telephones
7. Pagers
9. PHS
11. W-LAN
13. Headphone stereos
15. Burglarproof devices
2. Crystal filters
4. Cordless telephones
6. Tuner packs
8. Remote keyless entry systems
10. Radar detectors
12. Compact radios
14. DVDs
C min. (max.)
(pF)
C max.
(pF)
TC
Q
Rated
Voltage
Withstanding
Voltage
TZV2Z2R5A110
0.65
2.5 +100/-0%
NP0±300ppm/°C
200min. at 200MHz, Cmax.
25Vdc
55Vdc
TZV2Z030A110
1.5
3.0 +100/-0%
NP0±300ppm/°C
300min. at 1MHz, Cmax.
25Vdc
55Vdc
TZV2Z060A110
2.5
6.0 +100/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZV2Z100A110
3.0
10.0 +100/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
TZV2R200A110
4.5
20.0 +100/-0%
N750±500ppm/°C
500min. at 1MHz, Cmax.
25Vdc
55Vdc
Part Number
Insulation Resistance: 10000M ohm
Torque: 1.0 to 9.8mNm
Operating Temperature Range: -25 to +85°C
■ Construction
Cover
Spring Washer
Metal Rotor
Monolithic Stator
16
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZV2Z2R5
TZV2Z060
Z060 (NP0±300 ppm/°C)
Cap.Change (%)
Cap.Change (%)
Z2R5 (NP0±300 ppm/°C)
+8
+6
+4
+2
−10
−2
0
+6
+4
+2
Temp.(°C)
0
−25
+8
65
20
85
−25
45
−10
−4
−8
−10
−12
−12
TZV2Z100
TZV2R200
R200 (N750±500 ppm/°C)
Cap.Change (%)
Cap.Change (%)
Z100 (NP0±300 ppm/°C)
+8
+6
+4
+2
+6
+4
+2
20
65
20
−25
85
−10
0
45
4
+8
Temp.(°C)
0
−2
Temp.(°C)
−6
−8
0
45
−4
−10
−10
85
20
−2
0
−6
−25
65
0
Temp.(°C)
45
65
85
0
−2
−4
−4
−6
−6
−8
−8
−10
−10
−12
−12
■ Frequency Characteristics
TZV2Z2R5
TZV2Z060
1000
1000
1000
100
100
100
100
10
10
Q
10
10
1
Capacitance (pF)
1000
Q
1
500
1000
1500
2000
Frequency (MHz)
2500
3000
500
1000
1500
Capacitance (pF)
Z060
Z2R5
2000
Frequency (MHz)
Continued on the following page.
17
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZV2Z100
TZV2R200
R200
Z100
1000
100
100
10
10
1
1000
100
100
10
10
Q
Capacitance (pF)
Q
1000
Capacitance (pF)
1000
1
200
400
600
800
1000
200
400
Frequency (MHz)
800
1000
■ Land Pattern
4.0
1.2
2.4
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T4
T3
T2
Temperature (°C)
Temperature (°C)
4
600
Frequency (MHz)
T1
t2
Limit Profile
t3
Standard Profile
t1
T3
T2
t1
time (s)
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
Cycle
of reflow
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
1 time
Pre-heating
Heating
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
Solder Iron
Standard Profile
18
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
1. Soldering
(1) TZV2 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 120 micro m to 170 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause
bridging between the terminals or contact
failure due to flux wicking up.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.3mm bore
diameter).
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
4
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
VESSEL: No.9000 -0.9x30
(Murata: KMDR020)
(2) Recommended screwdriver bit for automatic
adjustment
MURATA: KMBT020
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
19
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
1. Small size with external dimension of
3.2(W)x4.5(L)x1.6(H)mm
2. Color coded stator permits easy identification of
capacitance and reduces mounting errors.
3. Can be adjusted with conventional adjustment tools
having a thickness of 0.5mm.
4. Designed for automatic placement in surface mount
applications.
5. Heat resistant resin withstands reflow soldering
temperatures.
3.2
■ Features
0.8
0.75
TZC3 Series
0.5
2.5 dia.
1.6
0.35
4.5
0.8
4.5
0.6
0.6
Tolerance: ±0.1
in mm
■ Applications
1. Compact radios
3. Pagers
5. Hybrid ICs
7. Cordless telephones
2. Headphone stereos
4. Portable radio equipments
6. Cellular telephones
8. Remote keyless entry systems
C min. (max.)
(pF)
C max.
(pF)
TC
Q
TZC3Z030A110
1.4
3.0 +50/-0%
NP0±300ppm/°C
300min. at 1MHz, Cmax.
100Vdc
220Vdc
TZC3Z060A110
2.0
6.0 +50/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Blue
TZC3R100A110
3.0
10.0 +50/-0%
N750±300ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
White
TZC3P200A110
5.0
20.0 +50/-0%
N1200±500ppm/°C
300min. at 1MHz, Cmax.
100Vdc
220Vdc
Red
TZC3P300A110
6.5
30.0 +50/-0%
N1200±500ppm/°C
300min. at 1MHz, Cmax.
100Vdc
220Vdc
Green
Part Number
5
Insulation Resistance: 10000M ohm
Torque: 1.5 to 9.8mNm
Operating Temperature Range: -25 to +85°C
■ Construction
Center axis
Rotor spring terminal
Ceramic plate
Stator
(One molded injection
with stator terminal)
Stator terminal
20
Rated Withstanding
Voltage
Voltage
Stator/Case Color
Brown
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
TZC3Z030
TZC3Z060
Z060 (NP0±300 ppm/°C)
+8
+6
+4
Temp.(°C)
+2
0
−25
−10
0
Cap.Change (%)
Cap.Change (%)
Z030 (NP0±300 ppm/°C)
−2
20
45
85
−25
65
−10
0
−4
−6
−6
−8
−8
−10
−10
−12
−12
20
45
65
85
P200 (N1200±500ppm/°C)
Cap.Change (%)
Cap.Change (%)
Temp.(°C)
TZC3P200
+8
+6
+4
+2
0
0
+4
+2
0
−2
TZC3R100
−10
+6
−4
R100 (N750±300 ppm/°C)
−25
+8
45
20
−2
65
+8
+6
+4
+2
0
85
Temp.(°C)
–25
–10 0
45
65
20
–2
−4
–4
−6
–6
−8
–8
−10
–10
−12
–12
85
Temp.(°C)
5
■ Frequency Characteristics
TZC3Z030
TZC3Z060
1000
100
100
10
10
1
Capacitance (pF)
Q
1000
Q
1000
1000
100
100
10
10
Capacitance (pF)
Z060
Z030
1
100
500
1000
1500
Frequency (MHz)
2000
100
500
1000
1500
2000
Frequency (MHz)
Continued on the following page.
21
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZC3R100
TZC3P200
R100
1000
100
100
10
10
Q
1000
1000
100
100
10
10
Capacitance (pF)
1000
Capacitance (pF)
Q
P200
1
1
200
400
600
800
200
1000
400
600
800
1000
Frequency (MHz)
Frequency (MHz)
■ Land Pattern
+0
5.0 −0.5
3.3±0.1
1.0±0.1
5
Tolerance: ±0.1
in mm
■ Temperature Profile
Reflow Soldering Profile
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T4
T3
T2
Temperature (°C)
Temperature (°C)
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
T1
t2
Limit Profile
t3
Standard Profile
t1
T3
T2
t1
time (s)
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
Cycle
of reflow
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
1 time
Pre-heating
Heating
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
Solder Iron
Standard Profile
22
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
1. Soldering
(1) TZC3 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
contact failure due to flux invasion into the
movable part and/or the contact point. The
soldering iron should not come in contact with
the stator of the trimmer capacitor. If such
contact does occur, the trimmer capacitor may
be damaged.
(6) Our recommended chlorine content of solder is as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
(8) When soldering the TZC3 series, the solder
should not flow into the staking part of the
substrate. If such flow does occur, driver slot
rotation will be damaged.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) Use the suitable dimension of the pick-up nozzle
(2.5mm external diameter and 1.5mm bore diameter).
3. Cleaning
Cannot be cleaned because of open construction.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
Standard type --> MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
Standard type --> MURATA: KMBT010
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
23
5
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZW4 Series
5.2±0.2
2.6 max.
4.2±0.2
1. To meet high power application due to withstanding
voltage 550Vdc
2. Extremely high self resonant frequency
(More than 3GHz at rated C max.)
3. Typical application: Impedance matching for Cellular
Base Station
4. High Q value in more than VHF, UHF and Microwave bands
(More than 200 in 500MHz, C max.)
5. Available for pick and place machine. Possible
thinner design due to 2.6mm low profile.
6. Non electrical contact construction
(rotor as middle electrode) provides high reliability.
7. Compact size due to 4.2(W)x5.2(L)x2.6max.(H)mm.
0.6
1.6
0.4 Depth
■ Features
2.8±0.2
3.0
2.2
+0.1
0.3 -0.2
±0.1
( Tolerance:
)
in mm
■ Applications
1. Transmitting power amplifier for Cellular Base Station
2. Transmitting amplifier for PHS Base Station
3. High frequency electric circuit
4. High power radio transmission
5. Transponder amplifier for cable TV
C min. (max.)
(pF)
C max.
(pF)
TC
Q
Rated
Voltage
Withstanding
Voltage
TZW4Z010A001
0.4
1.0 +50/-0%
NP0±150ppm/°C
200min. at 500MHz, Cmax.
250Vdc
550Vdc
TZW4Z1R5A001
0.4
1.5 +100/-0%
NP0±150ppm/°C
200min. at 500MHz, Cmax.
250Vdc
550Vdc
Part Number
6
Insulation Resistance: 10000M ohm
Torque: 1.5 to 10.0mNm
Operating Temperature Range: -55 to +125°C
■ Construction
Cover
Metal Rotor
Monolithic
Stator
24
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Temperature Characteristics
■ Frequency Characteristics
TZW4Z1R5
TZW4Z1R5
Cap.Change (%)
Z1R5 (NP0±150 ppm/˚C)
+8
1000
+6
+4
+2
Temp. (˚C)
0
−55
−25
−10
0
Z1R5
−2
20
45
65
85
105
125
1.5pF set
100
−4
−6
−8
Q
−10
−12
10
1
500
1000
1500
2000
2500
3000
Frequency (MHz)
■ Land Pattern
7.0
2.5
4.4
Tolerance: ±0.1
in mm
6
■ Temperature Profile
Reflow Soldering Profile
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T5
T4
T3
T2
Temperature (°C)
Temperature (°C)
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
T1
t2
Limit Profile
t3
Standard Profile
t1
T3
T2
t1
time (s)
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
Cycle
of reflow
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
1 time
Pre-heating
Heating
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
25
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30
to 85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxie gas,
etc.)
(2) In liquid (Ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
■ Notice (Soldering and Mounting)
6
1. Soldering
(1) TZW4 series can be soldered by reflow soldering
method and soldering iron. Do not use flow
soldering method (dipping).
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals or contact failure due to
flux wicking up.
(5) When using soldering iron, the diameter of the
string solder should be less than 0.5mm. The
string solder should be applied to the lower
part of the terminal only. Do not apply flux
except to the terminals. Excessive amounts of
solder and/or applying solder to the upper part
of the terminal may cause fixed metal rotor or
the contact failure due to flux invasion into
the movable part and/or the contact point. The
soldering iron should not come in contact with
the monolithic stator of the trimmer capacitor.
If such contact does occur, the trimmer
capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breaking.
(3) Use the suitable dimension of the pick-up nozzle
(1.8mm external diameter and 1.1mm bore
diameter).
3. Cleaning
Cannot be cleaned because of open construction.
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
-Recommended screwdriver for manual adjustment
VESSEL: No.9000 -1.3x30
(Murata: KMDR130)
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
applied to the screwdriver slot, it may cause
deformation of the products.
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
26
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZB4 Series
0.6±0.1 Depth 0.5
2.4±0.1
■ Features
1. Miniature rectangular shape:
4.0(W)x4.5(L)x3.0(H)mm
2. Color coded case facilitates identification of
capacitance range.
3. Designed for automatic placement in surface mount
applications.
4. Designed to withstand flux baths and solder baths
(with cover film type)
5. Can be temporarily attached to PCB with adhesives
(Terminal style A and B)
6. Can be reflow and flow (with cover film type)
soldering method
7. Stable characteristics over a wide frequency range
(Resonant frequency: 1000MHz min. / 6pF)
4.0±0.2
1.4±0.1 dia.
3.0±0.2
4.5±0.2
2.7±0.3
1.2±0.1
A Type
Tolerance: ±0.5
in mm
5.0
0.6±0.1 Depth 0.5
■ Applications
4.0±0.2
2.4±0.1
1.4±0.1 dia.
4.5±0.2
3.0±0.2
1. Car audio systems
2. Cordless telephones
3. Hybrid ICs
4. Pagers
5. Remote keyless entry systems
6. Tuner packs
7. Surveillance cameras
8. DVDs
9. Burglarproof devices
1.2±0.1
B Type
Tolerance: ±0.5
in mm
7.0
4.0±0.2
0.8±0.1
2.4±0.1
0.6±0.1 Depth 0.5
4.5±0.2
4.0±0.2
3.0±0.2
7.0
4.8
7
4.5
E Type
Tolerance: ±0.5
in mm
Part Number
C min. (max.)
(pF)
C max.
(pF)
TC
Q
Rated Withstanding
Voltage
Voltage
TZB4Z030pp10
1.4
3.0 +50/-0%
NP0±200ppm/°C
300min. at 1MHz, Cmax
100Vdc
220Vdc
TZB4Z060pp10
2.0
6.0 +50/-0%
NP0±200ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Blue
TZB4Z100pp10
3.0
10.0 +50/-0%
NP0±300ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
White
TZB4R200pp10
4.5
20.0 +50/-0%
N750±400ppm/°C
500min. at 1MHz, Cmax
100Vdc
220Vdc
Red
TZB4P300pp10
6.5
30.0 +50/-0%
N1200±500ppm/°C
300min. at 1MHz, Cmax
100Vdc
220Vdc
Green
TZB4P400pp10
8.5
40.0 +50/-0%
N1200±500ppm/°C
300min. at 1MHz, Cmax
100Vdc
220Vdc
Yellow
TZB4Z250pp10
4.0
25.0 +100/-0%
NP0±300ppm/°C
300min. at 1MHz, Cmax.
50Vdc
110Vdc
Black+Marking
TZB4R500pp10
7.0
50.0 +100/-0%
N750±300ppm/°C
300min. at 1MHz, Cmax
50Vdc
110Vdc
Black+Marking
Stator/Case Color
Brown
Insulation Resistance: 10000M ohm Torque: 1.5 to 9.8mNm Operating Temperature Range: -25 to +85°C
First blank: Terminal Type
Second blank: Cover film codes (A: not provided, B: provided)
ex. TZB4Z100AB10: Terminal Type is A, and Cover film is provided.
27
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Construction
Cover Film (Cover film type)
Rotor Spring
Plastic Case
−
Metal Rotor
Ceramic Plate
Stator Terminal
+
Rotor Terminal
■ Land Pattern/Mounting Holes
A Type
B Type
+0
8.0 - 0.5
+0
7.0 - 0.5
4.0±0.2
1.6±0.1
1.6±0.1
2.4±0.2
(in mm)
(in mm)
E Type
8.0 +0
- 0.5
1.2±0.1
4.2±0.2
7
3.2±0.2 dia.
(in mm)
■ Temperature Characteristics
TZB4Z060
TZB4Z100
+10
+8
+6
+4
+2
+20
–25
0
0
–2
Z100 (NP0±300ppm/°C)
Cap.Change (%)
Cap.Change (%)
Z060 (NP0±200ppm/°C)
+55
+85
Temp. (°C)
+10
+8
+6
+4
+2
+20
–25
0
0
–2
–4
–4
–6
–6
–8
–8
–10
–10
+55
+85
Temp. (°C)
Continued on the following page.
28
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Temperature Characteristics
TZB4R200
TZB4R500
+10
+8
+6
+4
+2
+20
–25
R500 (N750±300ppm/°C)
Cap.Change (%)
Cap.Change (%)
R200 (N750±400ppm/°C)
+55
0
–2
0
+10
+8
+6
+4
+2
+20
+85
Temp. (°C)
–25
+55
0
–2
0
–4
–4
–6
–6
–8
–8
–10
–10
+85
Temp.(°C)
■ Frequency Characteristics
TZB4Z060
TZB4Z100
Z060
1000
100
100
Q
1
1000
100
100
10
10
Q
10
10
1000
Capacitance (pF)
1000
Capacitance (pF)
Z100
1
100 200 300 400 500 600 700 800 900 1000
100 200 300 400 500 600 700 800 900 1000
Frequency (MHz)
Frequency (MHz)
TZB4R200
TZB4R500
R500
R200
10
10
1
100
200
300
400
Frequency (MHz)
500
600
Capacitance (pF)
100
Q 100
Q
1000
1000
100
100
10
10
1
100
200
300
400
Capacitance (pF)
7
1000
1000
500
Frequency (MHz)
Continued on the following page.
29
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Temperature Profile
Flow Soldering Profile
Temperature (°C)
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
Standard Profile
t2
Limit Profile
T1
Pre-heating
Standard Profile
t1
Heating
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Cycle
of reflow
150°C
60 to 120sec.
250°C
5sec. max.
1 time
time (s)
Limit Profile
Pre-heating
• Immerse the body in solder bath, available for cover film type.
Heating
Temp. (T1)
Time (t1)
Temp. (T3)
Time (t2)
Cycle
of reflow
150°C
60 to 120sec.
265±3°C
5sec. max.
2 times
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
Temperature (°C)
Temperature (°C)
T5
T3
T2
T4
T1
t2
Limit Profile
t3
Standard Profile
T3
T2
t1
time (s)
t1
Standard Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
t2
T1
Heating
Temp. (T2)
220°C
Time (t2)
Standard Profile
time (s)
Standard Profile
Peak
Cycle
temperature
of reflow
(T3)
30 to 60sec. 245±3°C
2 times
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Peak
temperature
(T3)
150°C
60 to 120sec.
183°C
30sec.
230 +5/-0°C
Pre-heating
Heating
Cycle
of reflow
1 time
Limit Profile
Pre-heating
Temp. (T1)
Time (t1)
150 to 180°C 60 to 120sec.
Heating
Temp. (T4)
230°C
Time (t3)
Peak
Cycle
temperature
of reflow
(T5)
30 to 50sec. 260 +5/-0°C
2 times
• Available for terminal shape A, B, and E..
Solder Iron
Standard Profile
7
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
30
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Soldering and Mounting)
1. Soldering
(1) Can be soldered by reflow soldering method, flow
soldering method, and soldering iron.
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature, the
trimmer capacitor may deviate from the specified
characteristics.
(3) The amount of solder is critical.
(4) The thickness of solder paste should be printed
from 150 micro m to 200 micro m and the dimension
of land pattern should be Murata's standard land
pattern used at reflow soldering. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the terminals
or contact failure due to flux wicking up.
(5) When using soldering iron, the string solder
should be applied to the lower part of the
terminal only. Do not apply flux except to the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or contact failure
due to flux invasion into the movable part and/or
the contact point. The soldering iron should not
come in contact with the plastic case of the
trimmer capacitor. If such contact does occur,
the trimmer capacitor may be damaged.
(6) Our recommended chlorine content of solder is
as follows.
(a) Solder paste: 0.2wt% max.
(b) String solder: 0.5wt% max.
(7) Do not use water-soluble flux (for water
cleaning). To prevent the deterioration of
trimmer capacitor characteristics, apply flux
only to terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Do not warp and/or bend PCB to prevent trimmer
capacitor from breakage.
(3) In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
(4) Use the suitable dimension of the pick-up nozzle.
> Without cover film type
- External dimensions of 4.5x4.0mm and
2.5mm bore diameter.
> With cover film type
- 4.0mm external diameter and 2.0mm bore
diameter.
3. Cleaning [with cover film type]
Isopropyl alcohol and Ethyl alcohol are available
material for cleaning. If you use any other types
of solvents, please evaluate performance by
your set. Moreover, please confirm no damage for
trimmer capacitor after cleaning by your conditions.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
MURATA: KMBT010
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
4. Do not break the cover film before the completion
of PCB mounting, soldering, and cleaning.
5. Do not clean the trimmer capacitor after the cover
film has been broken.
6. To break the cover film, first turn the screwdriver
more than 360 deg., and set the capacitance value.
(Only inserting the screwdriver cannot break the
cover film.)
7
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
31
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Trimmer Capacitors
TZ03 Series
2.5±0.2 dia.
0.5±0.2 Depth 0.5 min.
■ Features
4.8
6
3.3
5
1.0±0.1
F Type
0.2
0.2
.0
±0
1.0±0.1
5±
0.0
5
1. Car audio systems
2. Car clocks
3. Stereos
4. Radio cassette tape recorders
5. Cordless telephones 6. Video games
7. Compact radio equipment
8. Remote keyless entry systems
9. Burglarproof devices
Tolerance: ±0.5
in mm
6.6
2.5±0.2 dia.
6.0 dia.
0.5±0.2 Depth 0.5 min.
4.0
■ Applications
4
6 dia.
1. Color coded case facilitates identification of
capacitance range.
2. Sealed construction prevents the penetration of
flux and dust.
3. Available in two adjustment styles: Top/Rear.
4. + (Cross-shaped) slot enables automatic adjustment.
6.0
7.8
1.2±0.1
6.4
3.4
±
5
0.2 5 0.2±
0
.
0 0.0
5
1.0±0.1
4.8
3.0
3.0
N Type
Tolerance: ±0.5
in mm
C min. (max.)
(pF)
C max.
(pF)
TC
Q
TZ03Z2R3p169
1.25
2.3 +50/-0%
NP0±200ppm/°C
300min. at 1MHz, Cmax.
100Vdc
220Vdc
Black
TZ03Z050p169
1.5
5.0 +50/-0%
NP0±200ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Blue
TZ03Z070p169
2.0
7.0 +50/-0%
NP0±200ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Blue
TZ03Z100p169
2.7
10.0 +50/-0%
NP0±200ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Blue
TZ03R200p169
4.2
20.0 +50/-0%
N750±300ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Red
TZ03R300p169
5.2
30.0 +50/-0%
N750±300ppm/°C
500min. at 1MHz, Cmax.
100Vdc
220Vdc
Green
TZ03P450p169
6.8
45.0 +50/-0%
N1200±500ppm/°C
300min. at 1MHz, Cmax.
100Vdc
220Vdc
Yellow
TZ03P600p169
9.8
60.0 +50/-0%
N1200±500ppm/°C
300min. at 1MHz, Cmax.
100Vdc
220Vdc
Brown
TZ03Z500p169
6.0
50.0 +100/-0%
NP0±300ppm/°C
300min. at 1MHz, Cmax.
50Vdc
110Vdc
Orange
Part Number
8
Rated Withstanding
Voltage
Voltage
Stator/Case Color
TZ03R900p169
9.0
90.0 +100/-0%
N750±300ppm/°C
300min. at 1MHz, Cmax.
50Vdc
110Vdc
Black+Dot
TZ03R121p169
10.0
120.0 +100/-0%
N750±300ppm/°C
300min. at 1MHz, Cmax.
50Vdc
110Vdc
Black
Insulation Resistance: 10000M ohm Torque: 2.0 to 14.7mNm
A blank column is filled with terminal type codes.
32
Operating Temperature Range: -25 to +85°C
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Construction
■ Mounting Holes
F Type
N Type
3 dia.
a.
0.
1
1.3±0.1
1.
3±
1.
3±
0.
1
di
di
a
.
1.1±0.1
3
3.3
5
Tolerance: ±0.5
in mm
(Tolerance:in±0.5
mm)
■ Temperature Characteristics
TZ03Z070
TZ03R200
Z070 (NP0±200ppm/°C)
+6
Cap.Change (%)
+6
+4
+4
+2
+2
55
85
–25
0
0
0
0
55
20
20
85
Temp. (°C)
–2
–2
Temp. (°C)
–4
–4
–6
–6
8
TZ03Z500
P600 (N1200±500ppm/°C)
Z500 (NP0±300ppm/°C)
+8
+6
+4
+8
+6
+4
+2
20
–25
0
0
–2
–4
+2
55
55
85
20
85
Temp. (°C)
Cap.Change (%)
TZ03P600
Cap.Change (%)
–25
Cap.Change (%)
R200 (N750±300ppm/°C)
–25
0
0
–2
Temp. (°C)
–4
–6
–6
–8
–8
–10
–10
Continued on the following page.
33
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Temperature Characteristics
TZ03R121
+8
+6
+4
Cap.Change (%)
R121 (N750±300ppm/°C)
+2
20
–25
0
55
0
–2
85
Temp. (°C)
–4
–6
–8
–10
■ Frequency Characteristics
TZ03Z070
TZ03R200
R200
1000
100
100
Q
10
1000
100
100
10
10
Q
10
1
1000
100 200 300 400 500 600 700 800 900 1000
1
100
200
300
400
Capacitance (pF)
1000
Capacitance (pF)
Z070
500
Frequency (MHz)
Frequency (MHz)
TZ03P450
TZ03P600
P600
1000
100
100
Q
10
10
1
100
200
300
Frequency (MHz)
400
500
1000
1000
100
100
10
10
Q
1
100
200
300
400
Capacitance (pF)
8
1000
Capacitance (pF)
P450
500
Frequency (MHz)
Continued on the following page.
34
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Frequency Characteristics
TZ03R900
1000
1000
100
100
10
10
Q
1
100
200
300
400
Capacitance (pF)
R900
500
Frequency (MHz)
■ Temperature Profile
Flow Soldering Profile
Temperature (°C)
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
Standard Profile
t2
Heating
T1
Limit Profile
Standard Profile
t1
Pre-heating
Heating
Temp. (T1)
Time (t1)
Temp. (T2)
Time (t2)
Cycle
of reflow
150°C
60 to 120sec.
250°C
5sec. max.
1 time
time (s)
Pre-heating
Limit Profile
Pre-heating
Heating
Temp. (T1)
Time (t1)
Temp. (T3)
Time (t2)
Cycle
of reflow
150°C
60 to 120sec.
265±3°C
5sec. max.
2 times
Solder Iron
Standard Profile
Temperature of soldering iron tip
Soldering time
Soldering iron power output
Cycle of solder iron
350±10°C
3sec. max.
30W max.
1 time
■ Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degrees C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Open the package just before using.
6. Prior to storing previously opened packages, the
packaging should be heat-sealed. Avoid using
rubber bands for repackaging.
7. Do not store under direct sunlight.
8. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
8
35
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Notice (Soldering and Mounting)
1. Soldering
(1) TZ03 series can be soldered by flow soldering
method and soldering iron. Do not use reflow
soldering method.
(2) Soldering condition
Refer to the temperature profile.
If the soldering conditions are not suitable, e.g.,
excessive time and/or excessive temperature,
the trimmer capacitor may deviate from the
specified characteristics.
(3) The dimension of mounting hole should be Murata's
standard mounting hole used at flow soldering.
The amount of solder is critical. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB. Excessive amounts of
solder may cause bridging between the terminals
or contact failure due to flux wicking up.
(4) When using soldering iron, the string solder
should be applied to the lower part of the
terminal only. Do not apply flux except to the
terminals. Excessive amounts of solder and/or
applying solder to the upper part of the
terminal may cause fixed rotor or the contact
failure due to flux invasion into the movable
part and/or the contact point. The soldering
iron should not come in contact with the plastic
case of the trimmer capacitor. If such contact
does occur, the trimmer capacitor may be damaged.
(5) Our recommended chlorine content of string
solder is 0.5wt% max.
(6) Do not use water-soluble flux (for water cleaning).
To prevent the deterioration of trimmer
capacitor characteristics, apply flux only to
terminals.
2. Mounting
(1) Do not apply excessive force (preferably 5.0 N
[Ref: 500gf] max.), when the trimmer capacitor
is mounted on the PCB.
(2) Use the suitable PCB holes which are the same
pitch as the terminal of the trimmer capacitor.
If it would not fit with the terminal, the
excessive stress would be applied to the
terminal and the trimmer capacitor may deviate
from the specified characteristics.
(3) Do not apply bending stress more than 10.0N
(Ref: 1kgf) after the trimmer capacitor has
been mounted on the PCB.
(4) Mount trimmer capacitor in contact with PCB.
(5) In case of bending the terminals, do not apply
excessive force to the body of the product and
prevent the terminal fixing part from damaging.
3. Cleaning
Isopropyl alcohol and Ethyl alcohol are available
material for cleaning. If you use any other types
of solvents, please evaluate performance by
your set. Moreover, please confirm no damage for
trimmer capacitor after cleaning by your conditions.
4. Other
Note the polarity of the trimmer capacitor to
minimize influence by stray capacitance.
(Refer to the dimensions concerning the polarity.)
■ Notice (Handling)
8
1. Use suitable screwdrivers that fit comfortably in
driver slot.
(1) Recommended screwdriver for manual adjustment
MURATA: KMDR010
(2) Recommended screwdriver bit for automatic
adjustment
MURATA: KMBT010
■ Notice (Other)
Before using trimmer capacitor, please test after
assembly in your particular mass production system.
36
2. When adjusting with a screwdriver, do not apply
excessive force (preferably 1.0 N [Ref: 100gf] max.)
to minimize capacitance drift. If excessive force
is applied to the screwdriver slot, it may cause
deformation of the products.
3. Do not apply adhesive, lock paints, or any other
substances to the trimmer capacitor to secure the
rotor position. They may cause corrosion or
electrical contact problems.
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
■ Minimum Quantity
Minimum Quantity (pcs.)
Part Number
φ180mm Reel
φ330mm Reel
TZR1
3000
-
500
TZS2
3000
-
500
TZY2
2000
-
500
TZV2
2000
-
500
TZC3
1000
-
500
TZW4
500
-
100
TZB4
500
2500
500
TZ03
-
-
1000
Bulk
■ Dimension of Tape
TZR1 Series
TZS2 Series
2.0±0.1
4.0±0.1
4.0±0.1
3.5±0.1
3.0±0.2
1.8±0.2
1.25±0.2
+0.1
1.5 -0 dia.
0.25±0.1
8.0±0.3
1.75±0.1
2.0±0.2
3.5±0.1
1.5 +0.1
-0 Dia.
0.25±0.1
8.0±0.3
1.05±0.2
4.0±0.1
1.75±0.1
2.0±0.1
4.0±0.1
2.5±0.2
(in mm)
(in mm)
TZY2/TZV2 Series
1.5 +0.1
− 0 dia.
t
4.0
2
4
5.5
4.9±0.2
8.0±0.2
3.5
A
3.6±0.2
2.0±0.2
0.3
12±0.3
A
0.25
1.75
2.0
TZC3 Series
1.75
1.5 +0.1
− 0 dia.
A-Across
section
A
A
A-Across
section
3.6±0.2
8
2.7±0.2
t=TZY2 (TZVY2) : 1.6±0.2
TZV2 (TZV02) : 1.9±0.2
4.0
Tolerance : ±0.1
in mm
Tolerance: ±0.1
in mm
8
TZW4 Series
TZB4 Series
A
8
4.6
4 .0
A
5.5
1.75
0.3
2.0
12±0.2
5.6
5.5
A
8.0
4.8
7.5
4
1.75
2
+0.1
1.5 − 0 dia.
2.6
A-Across
section
3.55±0.2
0.3±0.1
12.0±0.3
1.5 +0.1
− 0 dia.
1.8
A-Across
section
A
4.3
Tolerance: ±0.1
in mm
Direction of feed
Tolerance: ±0.1
in mm
37
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
■ Dimension of dia. 178mm Reel
TZR1/TZS2/TZY2/TZV2 Series
TZC3/TZW4/TZB4 Series
2.0±0.5
21.0±0.8 Dia.
50 min.
13.0±0.5 Dia.
50 min.
13.0±0.5 Dia.
2.0±0.5
21.0±0.8 Dia.
9.0±1.0
13.0±1.0
13.0±1.0
178±2 Dia.
178±2 Dia.
(in mm)
(in mm)
■ Dimension of dia. 330mm Reel
TZB4 Series
50 min.
13.0±0.5 dia.
2.0±0.5
21.0±0.8 dia.
13.5±1.0
17.5±1.0
328±2 dia.
(in mm)
8
38
17.0±1.0
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recommended Adjustment Tools
Please use the following recommended screwdriver.
You can order this driver with part number below.
Though you can also adjust the capacitance value by commercial products, please use one which has the same head size as
the driver below.
■ For Manual Adjustment
Series
MURATA
Model Number
Manufacturers
Model Number
Shape
80
1.5
TZR1
KMDR160
MURATA MFG.
KMDR160
Bit shape:
Minus (0.3×0.13)
(in mm)
80
1.5
TZS2
KMDR050
MURATA MFG.
KMDR050
Bit shape: Square (0.54×0.54)
(in mm)
108
18
TZY2
KMDR060
ENGINEER INC.
DA-89
Bit shape:
Minus (0.8×0.35)
(in mm)
125
15
TZV2
KMDR020
VESSEL MFG.
9000
0.9-30
NO.9000 -0.9g30
Bit shape:
Minus (0.9×0.4)
(in mm)
122
50
20
TZC3
KMDR010
MURATA MFG.
KMDR010
Bit shape:
Minus (2.2×0.4)
(in mm)
125
15
TZW4
KMDR130
VESSEL MFG.
9000
CERAMIC BLADE
ELECTRONICS
NO.9000 -1.3g30
1.3-30
8
Bit shape:
Minus (1.3×30)
(in mm)
122
50
20
TZB4
TZ03
KMDR010
MURATA MFG.
KMDR010
Bit shape:
Minus (2.2×0.4)
(in mm)
Continued on the following page.
39
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recommended Adjustment Tools
Continued from the preceding page.
■ For Automatic Adjustment
Series
MURATA
Model Number
Manufacturers
Model Number
Shape
20
2
KMBT050
MURATA MFG.
KMBT050
1.8 dia.
TZS2
Bit shape: Square (0.54×0.54)
(in mm)
25
0.6
KMBT060
MURATA MFG.
KMBT060
Bit shape:
Minus (0.56 ×0.25)
2.4 dia.
TZY2
(in mm)
25
0.6
KMBT020
MURATA MFG.
KMBT020
Bit shape:
Minus (0.9×0.4)
2.4 dia.
TZV2
(in mm)
TZC3
TZB4
TZ03
KMBT010
MURATA MFG.
KMBT010
Bit shape:
Minus (2.2×0.4)
2.2 dia.
30
(in mm)
8
40
PDF catalog
is downloaded
from!CAUTION
the website (for
of Murata
Manufacturing
co., ltd.
Therefore,
it’s specifications
areinsubject
to change
or oursmoking
productsand/or
in it may
be discontinued
without advance notice. Please check with our
• Please
read rating and
storage,
operating, rating,
soldering,
mounting
and handling)
this catalog
to prevent
burning,
etc.
!Note • This
!Note
T13E.pdf
08.8.27
sales representatives
or product
engineers
before ordering.
• This catalog
has only
typical specifications
because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Qualified Standards
The products listed herein have been produced
by the QS9000 and ISO9001 certified factory
MURATA FACTORY
Sabae Murata Mfg. Co., Ltd.
∗ No ODCs (Ozone Depleting Chemicals) are used on
any Murata trimmer potentiometers.
41
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
T13E.pdf
08.8.27