PSAQC60 Series For PCB Mount 60 Watt Single Output AC/DC Switching Power Supply FEATURES ● Trimmable Output of ±10% ● Single Output of 5VDC to 24VDC ● Switching Power Module for PCB Mount ● Universal Input of 90-264VAC for Worldwide Use ● Short Circuit, Over Power, and Over Voltage Protection SPECIFICATIONS: PSAQC60 Series o All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 90 ~ 264VAC or 120 ~ 370VDC Input Frequency 47 to 63Hz Input Current (Full Load) 2A max @ 115VAC / 1A max @ 230VAC Inrush Current (<2ms) 20A max @ 115VAC / 40A max @230VAC Leakage Current 3.5mA max OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 60 Watts max. Voltage Accuracy ±2% Trim ±10% Line Regulation (LL – HL) ±1% typical Load Regulation (5% to 100%) ±1% typical Output Current See Table Minimum Load 0% Ripple & Noise 75mVp-p max. Maximum Capacitive Load 470 - 23,000µF depending on model Hold-Up Time 18ms min. Temperature Coefficient ±0.02%/°C PROTECTION Over Power Protection Auto recovery Over Voltage Protection Zener diode clamp Short Circuit Protection Auto recovery GENERAL SPECIFICATIONS Switching Frequency 133KHz Efficiency See Table Isolation Voltage (Input to Output) 3000VAC Isolation Voltage (Input to Field Ground) 1500VAC Isolation Voltage (Output to Field Ground) 500VAC ENVIRONMENTAL SPECIFICATIONS Operating Temperature -25°C to +70°C (with derating) Storage Temperature -40°C to +85°C Humidity 95% RH Cooling Free air convection MTBF > 130,000 hours @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 420g Dimensions 4.25(L) x 2.24(W) x 1.34(H) inches (108.0(L) x 57.0(W) x 34.0(H) mm) (Tolerance ±0.5mm) SAFETY & EMC Agency Approvals CE, UL EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSAQC60 Series For PCB Mount 60 Watt Single Output AC/DC Switching Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Output Current Output Power Efficiency PSAQC60-5S 90 - 264VAC (120 - 370VDC) 5 VDC 10A 50W 73% PSAQC60-12S 90 - 264VAC (120 - 370VDC) 12 VDC 5A 60W 80% PSAQC60-15S 90 - 264VAC (120 - 370VDC) 15 VDC 4A 60W 80% PSAQC60-24S 90 - 264VAC (120 - 370VDC) 24 VDC 2.5A 60W 80% NOTES 1. All specifications valid at nominal voltage, full load and +25°C after warm-up time unless otherwise stated. 2. Ripple and noise measured with 0.1uF 50V // 47uF 50V ceramic capacitors across output. BLOCK DIAGRAM DERATING CURVE Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSAQC60 Series For PCB Mount 60 Watt Single Output AC/DC Switching Power Supply MECHANICAL DRAWING PIN CONNECTIONS PIN # SINGLE 1 AC IN (N) 2 AC IN (L) 3 FG 4 +DC OUT 5 -DC OUT 6 TRIM Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797