PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions Series PSH3018 PSH3027 PSH4028 PSH5018 PSH5028 PSH6022 Dimensions [mm] A 3.80±0.30 3.80±0.30 4.80±0.20 5.80±0.30 5.80±0.30 6.80±0.20 B 3.80±0.30 3.80±0.30 4.80±0.20 5.80±0.30 5.80±0.30 6.80±0.20 C 1.65±0.15 2.80±0.20 2.80±0.20 1.80±0.20 2.80±0.20 2.30±0.20 D(typ.) 1.30 1.30 1.60 1.90 1.90 2.30 E(typ.) 1.20 1.20 1.60 2.00 2.00 2.20 G(ref.) 1.10 1.10 1.50 1.90 1.90 2.10 H(ref.) 4.30 4.30 5.30 6.30 6.30 7.30 I(ref.) 1.60 1.60 2.00 2.20 2.20 2.60 R(ref.) 1.30 1.40 1.80 2.20 2.20 2.70 2. Schematic Diagram 3. Materials a.- Core : Ferrite DR core b.- Core : Ferrite RI core c.- Wire : Enamelled copper wire (class F) d.- Adhesive : Epoxy resin e.- Terminal : Ag / Ni / Sn f.- Remark : Lead content 200ppm max. include ferrite 1 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 4. General Specification a.- Temp. rise 20ºC typ. (PSH3027) 30ºC max. (PSH3018, PSH4028, PSH5028, PSH6022) 40ºC typ. (PSH5018) b.- Storage temp. : -40ºC ~ +125ºC c.- Operating temp. -25ºC ~ +105ºC (PSH3018) -40ºC ~ +105ºC (PSH3027…PSH6022) d.- Resistance to solder heat : 260ºC. 10 secs 5. Electrical Characteristics PSH3018 (1.5µH – 100µH) Inductance (µ µH) Test Freq. L (KHz) Irms (mA) max. Isat (mA) typ. PSH3018 – 1R5N 1.5±30% 100 47 PSH3018 – 2R5N PSH3018 – 3R6N 2.5±30% 3.6±30% 100 100 58 85 35 1750 1550 45 65 1450 1380 1250 1100 PSH3018 – 4R7N PSH3018 – 6R8N 4.7±30% 6.8±30% 100 100 105 156 85 125 1200 850 900 750 PSH3018 – 100N PSH3018 – 150N 10.0±30% 15.0±30% 100 100 205 285 165 230 740 620 560 450 PSH3018 – 220N PSH3018 – 330N 22.0±30% 33.0±30% 100 100 450 660 360 545 510 420 360 320 PSH3018 – 470N PSH3018 – 680N 47.0±30% 68.0±30% 100 100 1000 1450 800 1200 390 320 250 220 PSH3018 – 101N 100.0±30% 100 2400 2050 250 180 DWG No. RDC (mΩ) max. typ. 2 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSH3027 (4.7µH – 220µH) DWG No. Inductance (µ µH) Q ref. Test Freq. Q (MHz) 7.96 2.52 SRF (MHz) typ. RDC (mΩ) typ. max. Irms (mA) typ. Isat (mA) typ. 50 30 30 60 40 78 2000 1600 750 530 PSH3027 – 4R7N PSH3027 – 100N 4.7±30% 10.0±30% 5 8 L (KHz) 100 100 PSH3027 – 150N PSH3027 – 220N 15.0±30% 22.0±30% 7 6 100 100 2.52 2.52 25 22 88 120 115 156 1300 1100 400 320 PSH3027 – 330N PSH3027 – 470N 33.0±30% 47.0±30% 7 7 100 100 2.52 2.52 18 16 165 225 215 280 920 820 270 230 PSH3027 – 680N PSH3027 – 101N 68.0±30% 100.0±30% 6 8 100 100 2.52 0.796 11 9 335 465 420 580 660 600 190 160 PSH3027 – 121N PSH3027 – 151N 120.0±30% 150.0±30% 8 10 100 100 0.796 0.796 8 7 600 690 750 860 520 480 140 125 PSH3027 – 221N 220.0±30% 8 100 0.796 6 1050 1320 380 100 PSH4028 (1.2µH – 560µH) PSH4028 – 1R2N PSH4028 – 1R8N 1.2±30% 1.8±30% Test Freq. L (KHz) 100 100 PSH4028 – 2R2N PSH4028 – 2R7N 2.2±30% 2.7±30% 100 100 28.0 30.0 2500 2350 2050 1800 PSH4028 – 3R3N PSH4028 – 3R9N 3.3±30% 3.9±30% 100 100 35.0 60.0 2150 1720 1650 1500 PSH4028 – 4R7N PSH4028 – 5R6N 4.7±30% 5.6±30% 100 100 70.0 85.0 1550 1380 1300 1200 PSH4028 – 6R8N PSH4028 – 8R2N 6.8±30% 8.2±30% 100 100 90.0 100.0 1300 1250 1150 1050 PSH4028 – 100N PSH4028 – 120N 10.0±30% 12.0±30% 100 100 110.0 125.0 1190 1120 1000 850 PSH4028 – 150N PSH4028 – 180N 15.0±30% 18.0±30% 100 100 150.0 160.0 1030 980 780 750 PSH4028 – 220N PSH4028 – 270N 22.0±30% 27.0±30% 100 100 185.0 200.0 925 890 720 600 PSH4028 – 330N PSH4028 – 390N 33.0±30% 39.0±30% 100 100 230.0 250.0 820 795 580 500 PSH4028 – 470N 47.0±30% 100 280.0 750 480 DWG No. Inductance (µ µH) RDC (mΩ) max. 20.0 25.0 Irms (mA) max. 3100 2700 Isat (mA) typ. 2560 2200 3 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSH4028 (1.2µH – 560µH) PSH4028 – 560N PSH4028 – 680N PSH4028 – 820N PSH4028 – 101N PSH4028 – 121N PSH4028 – 151N PSH4028 – 181N PSH4028 – 221N PSH4028 – 271N PSH4028 – 331N PSH4028 – 391N PSH4028 – 471N PSH4028 – 561N 56.0±30% 68.0±30% 82.0±30% 100.0±30% 120.0±30% 150.0±30% 180.0±30% 220.0±30% 270.0±30% 330.0±30% 390.0±30% 470.0±30% 560.0±30% 100 100 100 100 100 100 100 100 100 100 100 100 100 320.0 400.0 520.0 600.0 700.0 860.0 1000.0 1250.0 1500.0 1700.0 2200.0 2600.0 3000.0 700 630 560 510 470 420 390 340 320 300 260 240 220 410 360 320 300 280 260 230 200 180 170 160 155 150 PSH5018 (1.2µH – 220µH) PSH5018 – 1R2N 1.2±30% Test Freq. L (KHz) 100 PSH5018 – 1R8N PSH5018 – 2R5N 1.8±30% 2.5±30% 100 100 90 80 0.035 0.040 2.60 2.40 3.00 2.70 PSH5018 – 3R0N PSH5018 – 3R9N 3.0±30% 3.9±30% 100 100 70 60 0.045 0.055 2.20 2.00 2.40 2.10 PSH5018 – 5R0N PSH5018 – 6R2N 5.0±30% 6.2±30% 100 100 58 55 0.060 0.080 1.65 1.45 1.80 1.60 PSH5018 – 7R5N PSH5018 – 9R0N 7.5±30% 9.0±30% 100 100 50 40 0.090 0.110 1.35 1.25 1.50 1.35 PSH5018 – 100N PSH5018 – 120N 10.0±30% 12.0±30% 100 100 40 38 0.130 0.160 1.10 1.00 1.25 1.15 PSH5018 – 150N PSH5018 – 180N 15.0±30% 18.0±30% 100 100 36 32 0.190 0.210 0.95 0.90 1.10 1.00 PSH5018 – 220N PSH5018 – 270N 22.0±30% 27.0±30% 100 100 28 26 0.280 0.320 0.80 0.75 0.90 0.80 PSH5018 – 330N PSH5018 – 390N 33.0±30% 39.0±30% 100 100 22 18 0.350 0.500 0.65 0.55 0.70 0.65 PSH5018 – 470N PSH5018 – 560N 47.0±30% 56.0±30% 100 100 18 16 0.550 0.600 0.52 0.48 0.60 0.55 PSH5018 – 680N PSH5018 – 820N 68.0±30% 82.0±30% 100 100 14 13 0.850 0.950 0.40 0.38 0.50 0.45 PSH5018 – 101N PSH5018 – 121N 100.0±30% 120.0±30% 100 100 12 10 1.100 1.420 0.35 0.30 0.42 0.40 DWG No. Inductance (µ µH) SRF (MHz) typ. 100 RDC (Ω Ω) max. 0.030 Irms (A) typ. 3.00 Isat (A) typ. 3.50 4 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSH5018 (1.2µH – 220µH) PSH5018 – 151N 150.0±30% 100 9 1.650 0.28 0.35 PSH5018 – 181N PSH5018 – 221N 180.0±30% 220.0±30% 100 100 8 7 2.300 2.500 0.25 0.23 0.32 0.30 SRF (MHz) typ. 55.0 RDC (Ω Ω) max. 0.030 Irms (A) max. 3.00 Isat (A) typ. 2.70 PSH5028 (2.6µH – 680µH) PSH5028 – 2R6N 2.6±30% Test Freq. L (KHz) 100 PSH5028 – 3R0N PSH5028 – 4R2N 3.0±30% 4.2±30% 100 100 45.0 40.0 0.030 0.035 2.80 2.50 2.50 2.20 PSH5028 – 5R3N PSH5028 – 6R2N 5.3±30% 6.2±30% 100 100 45.0 40.0 0.040 0.045 2.30 2.20 1.90 1.80 PSH5028 – 8R2N PSH5028 – 100N 8.2±30% 10.0±30% 100 100 28.0 25.0 0.055 0.070 2.10 1.50 1.60 1.40 PSH5028 – 120N PSH5028 – 150N 12.0±30% 15.0±30% 100 100 20.0 20.0 0.080 0.100 1.46 1.38 1.25 1.15 PSH5028 – 180N PSH5028 – 220N 18.0±30% 22.0±30% 100 100 20.0 18.0 0.110 0.120 1.25 1.15 1.10 1.00 PSH5028 – 270N PSH5028 – 330N 27.0±30% 33.0±30% 100 100 16.0 15.0 0.160 0.190 1.05 0.90 0.90 0.78 PSH5028 – 390N PSH5028 – 470N 39.0±30% 47.0±30% 100 100 14.0 13.0 0.210 0.250 0.86 0.82 0.72 0.65 PSH5028 – 560N PSH5028 – 680N 56.0±30% 68.0±30% 100 100 11.0 10.0 0.300 0.350 0.72 0.62 0.60 0.56 PSH5028 – 820N PSH5028 – 101N 82.0±30% 100.0±30% 100 100 9.0 8.5 0.430 0.480 0.52 0.45 0.50 0.45 PSH5028 – 151N PSH5028 – 221N 150.0±30% 220.0±30% 100 100 6.5 6.0 0.900 1.250 0.33 0.30 0.35 0.30 PSH5028 – 331N PSH5028 – 681N 330.0±30% 680.0±30% 100 100 4.5 2.8 2.000 4.300 0.20 0.13 0.20 0.14 DWG No. Inductance (µ µH) 5 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSH6022 (0.9µH – 1000µH) PSH6022 – R90N PSH6022 – 1R5N 0.9±30% 1.5±30% Test Freq. L (KHz) 100 100 PSH6022 – 2R2N PSH6022 – 3R3N 2.2±30% 3.3±30% 100 100 24.0 32.0 3400 2800 2600 2200 PSH6022 – 5R0N PSH6022 – 6R2N 5.0±30% 6.2±30% 100 100 46.0 54.0 2150 1900 2000 1700 PSH6022 – 7R5N PSH6022 – 100N 7.5±30% 10.0±30% 100 100 60.0 70.0 1700 1600 1500 1300 PSH6022 – 120N PSH6022 – 150N 12.0±30% 15.0±30% 100 100 80.0 95.0 1430 1310 1150 1050 PSH6022 – 180N PSH6022 – 220N 18.0±30% 22.0±30% 100 100 100.0 120.0 1280 1220 1000 950 PSH6022 – 270N PSH6022 – 330N 27.0±30% 33.0±30% 100 100 150.0 200.0 1040 930 850 780 PSH6022 – 390N PSH6022 – 470N 39.0±30% 47.0±30% 100 100 250.0 280.0 760 730 700 620 PSH6022 – 560N PSH6022 – 680N 56.0±30% 68.0±30% 100 100 320.0 360.0 680 640 560 500 PSH6022 – 820N PSH6022 – 101N 82.0±30% 100.0±30% 100 100 420.0 480.0 600 550 450 400 PSH6022 – 121N PSH6022 – 151N 120.0±30% 150.0±30% 100 100 600.0 720.0 480 430 360 320 PSH6022 – 181N PSH6022 – 221N 180.0±30% 220.0±30% 100 100 860.0 1100.0 400 360 280 250 PSH6022 – 271N PSH6022 – 331N 270.0±30% 330.0±30% 100 100 1300.0 1500.0 340 290 220 200 PSH6022 – 391N PSH6022 – 471N 390.0±30% 470.0±30% 100 100 1800.0 2200.0 275 240 180 170 PSH6022 – 561N PSH6022 – 681N 560.0±30% 680.0±30% 100 100 2700.0 3500.0 225 190 160 150 PSH6022 – 821N PSH6022 – 102N 820.0±30% 1000.0±30% 100 100 4000.0 5000.0 172 160 140 130 DWG No. Inductance (µ µH) RDC (mΩ Ω) max. 14.0 18.0 Irms (mA) max. 4800 4300 Isat (mA) typ. 4400 3500 [Inductance tested at 0.1V] [Irms base on temp. rise: 20ºC (PSH3027), 30ºC (PSH3018,PSH4028,PSH5028,PSH6022), 40ºC (PSH5018)] [Isat base on ∆L/L0A=35%] 6 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 6. Curve Inductance VS. DC Current Curve PSH3018 PSH3027 PSH4028 PSH5018 PSH5028 PSH6022 7 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 7. Packaging Information P 4 mm End Start Leader no component 200 mm min. Components Trailer no component 400 mm min. User direction of feed ( PSH3018, PSH3027, PSH4028 P = 8mm) (PSH5018, PSH5028, PSH6022 P = 12mm) 8 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com PSH3018, PSH3027 & PSH4028 Style 07 – 12 Dimensions [mm] A 178 B 21±0.8 C 13 D 12 G 14+0 N 50-0 T 16.5 G 18+0 18+0 N 50-0 50-0 T 20.5 22.4 PSH5018, PSH5028 & PSH6022 Style 07 – 16 13 – 16 Series PSH3018 PSH3027 PSH4028 Dimensions [mm] A 178 330 B 21±0.8 21±0.8 C 13 13±0.5 D 16 16 Inner : Reel Q’TY(pcs) 1,000 500 500 PSH5018 PSH5028 PSH6022 Outer : Carton G.W.(gw) 150 140 220 Style 07 – 12 07 – 12 07 - 12 Q’TY(pcs) 40,000 20,000 20,000 G.W.(Kg) 8.50 8.00 6.50 Size(cm) 42 x 41 x 24 42 x 41 x 24 40 x 40 x 24 500 275 07 – 16 15,000 9.50 42 x 41 x 24 2,000 1,100 13 – 16 12,000 8.00 40 x 40 x 24 400 300 07 – 16 12,000 10.0 42 x 41 x 24 1,500 1,100 13 – 16 9,000 8.00 40 x 40 x 24 500 230 07 – 16 15,000 8.20 42 x 41 x 24 1,500 950 13 – 16 9,000 12.00 40 x 40 x 24 8. Labelling 9 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 9. Reliability Test Test item Specification More than 90% of the terminal electrode shall be covered with fresh solder Solderability Thermal shock test (Temp. cycle) Inductance shall not change more than ±20% Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Humidity Resistance test Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours High temp. Resistance test 10. Edition Control Edition Date Change description Made by 10 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PSH3018 PSH3018 , PSH3027 PSH3027 , PSH4028 PSH4028 , PSH5018 PSH5018 , PSH5028 & PSH6022 PSH6022 SMD Power Inductors Shielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1st 31/08/06 Update Specification Pablo Pozo 11 SMD Power Inductors P REEM PR MO O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.