PW180KA Universal 20 Watt (Non-Compliant) PoE / SMPS 3 Year Warranty • Power over Ethernet (PoE) •Self Contained Midspan Power Injector •100-250VAC •Desktop Style •Single Output up to 20W •Does Not Meet IEEE802.3af Requirements •Regulated Output with Low Ripple •CE Compliant International Safety Standard Approvals Specifications Output Specifications Voltage +48VDC Typical, 44V to 57V Load Regulation +/-4%, 44V to 57V Ripple and Noise f < 500kHz 500Hz-150kHz 150kHz-500kHz 500kHz-1MHz 500mVp-p 200mVp-p 150mVp-p 100mVp-p Transient Response 0.5ms for 50% Load change Typical Pin Assignment (see page 2) Input Specifications Voltage 100-250VAC -10%, +6% Line Frequency 47-63Hz Input Current 90VAC Input 0.5A max. Protection Internal Primary Current Fuse, Inrush Limiting Environmental Specifications Thermal Performance Operating temperature with no derating convectional cooling, Non vented case 0° C to 40° C Relative Humidity Non-condensing 5% to 95% Altitude 0-10,000 feet General Specifications Stand By Mode LED Green - (Single color) Power supply is ON Topology Switching-Fixed Frequency Flyback Efficiency 70% min. Dielectric Withstand 3,000VAC or 4,250VDC Primary-Secondary Storage Temp -30 °C to 85 °C Approvals and Safety Standards UL60950-1, IEC/EN60950-1 EMC : EN55022 / 55024 61000 Weight 5.6 ounces, 160 grams MTBF 100,000 Calculated Hours Leakage Current Less than 0.75mA at 265VAC 50Hz Spacing Case and Dimension Desktop Style 3.98L x 2.40W x 1.35H (in) 101.0L x 61.5W x 34.2H (mm) Case Material Black 94V0 Polycarbonate Cord and Connectors 6.4mm Primary-Secondary Dual RJ45 Jacks built into the enclosure. SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com PW180KA Universal 20 Watt (Non-Compliant) PoE / SMPS For the most current data and application support visit www.slpower.com Output Currents Output Voltage Min Max Ault Part Number PW180KA4800_01 48 V 0.00 A 0.40 A Ripple Vp-p max. 20.0 W 480 mV Ault Part Number Key PW180 K A 48 00 _ 01 Product Family Name Manufacturing Location Design Revision Changes Voltage DC Connector Number Input Configuration/ Model Type Standard (no modifications or special packaging) Input Configuration United Kingdom (G) Max Watts Pin Connections IEC320 Australian w/ground (E) C14 (F) Specify the Input Configuration Code in your order. Shaver IEC320 C8 w/o ground (N) C18 (Q) N. America/ Japan (B) Europe (M) United Kingdom (G) Australian (E) Shaver C8 (N) 87654321 J1 J1 Pins 1. Data Pair 1 2. Data Pair 1 3. Data Pair 2 4. + VDC 5. + VDC 6. Data Pair 2 7. - VDC 8. - VDC 87654321 J2 J2 Pins 1. Data Pair 1 2. Data Pair 1 3. Data Pair 2 4. No Connection 5. No Connection 6. Data Pair 2 7. No Connection 8. No Connection SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2007 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.04/17/07