Document 490-1 SMT Power Inductors - SER2800 Series • Perfect for high current, low voltage power supply applications • Extremely low DCR; Current handling to >100 Amps • Higher inductance values than other SER series – up to 33 µH Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight SER2814L – 27.5 g; SER2814H – 28.7 g; SER2817H – 34.7 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 25 pieces per tray PCB washing Only pure water or alcohol recommended DCR2 Inductance1 SRF (mOhms) ±10% typ3 Part number (µH) nom max (MHz) SER2814L-152KL 1.5 1.47 1.62 60 SER2814H-222KL 2.2 1.83 2.01 40 SER2814L-222KL 2.2 1.47 1.62 50 SER2817H-332KL 3.3 2.56 2.82 40 SER2814H-332KL 3.3 1.83 2.01 30 SER2814L-332KL 3.3 1.47 1.62 40 SER2817H-472KL 4.7 2.56 2.82 30 SER2814H-472KL 4.7 1.83 2.01 25 SER2814L-472KL 4.7 1.47 1.62 30 SER2817H-682KL 6.8 2.56 2.82 25 SER2814H-682KL 6.8 1.83 2.01 20 SER2814L-682KL 6.8 1.47 1.62 25 SER2817H-103KL 10 2.56 2.82 20 SER2814H-103KL 10 1.83 2.01 15 SER2814L-103KL 10 1.47 1.62 20 SER2817H-153KL 15 2.56 2.82 16 SER2814H-153KL 15 1.83 2.01 12 SER2814L-153KL 15 1.47 1.62 15 SER2817H-223KL 22 2.56 2.82 15 SER2814H-223KL 22 1.83 2.01 10 SER2814L-223KL 22 1.47 1.62 10 SER2817H-333KL 33 2.56 2.82 10 SER2814H-333KL 33 1.83 2.01 8 SER2814L-333KL 33 1.47 1.62 7 10% drop 100 100 82.0 91.0 62.0 48.0 59.0 42.0 33.0 42.0 30.0 22.0 28.0 18.0 13.0 18.0 11.5 7.5 12.0 7.0 4.5 7.0 4.0 2.0 Isat (A)4 Irms (A)5 20% 30% 20°C 40°C drop drop rise rise >100 >100 20 30 >100 >100 20 30 84.0 84.8 20 30 92.5 93.6 20 28 66.9 68.4 20 30 54.0 57.0 20 30 61.2 62.4 20 28 48.0 50.1 20 30 36.9 39.0 20 30 45.0 45.9 20 28 34.5 36.2 20 30 26.0 27.8 20 30 31.2 32.1 20 28 21.5 23.4 20 30 16.2 17.6 20 30 21.2 21.9 20 28 14.0 15.2 20 30 9.8 11.0 20 30 14.0 15.0 20 28 8.6 9.6 20 30 6.0 6.8 20 30 8.7 9.6 20 28 5.1 5.9 20 30 2.6 3.3 20 30 1. Inductance measured at 500 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. 2. DCR measured on a Keithley 580 microohmmeter or equivalent. 3. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 4. DC current at which the inductance drops the specified amount from its value without current. 5. Current that causes a the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Caution: This series is not intended for use in high vibration or mechanical shock environments. We advise using additional means of securing the part to the circuit board to ensure its adhesion. Consider our SER2900 series, which offers nearly identical electrical characteristics and incorporates a third mount pad for better stability and board adhesion. Specifications subject to change without notice. Please check our website for latest information. Document 490-1 © Coilcraft, Inc. 2008 Revised 08/22/08 Document 490-2 SMT Power Inductors - SER2800 Series Recommended Land Pattern 1.10 max 27,9 SER28XXX COILCRAFT XX 1.100 max 27,94 0.76 max 19,3 CL 0.455 11,56 0.220 5,59 0.160 4,06 0.240 6,10 0.210 5,33 0.190 4,83 Height (See table) 0.004/0,102 0.150 3,8 Maximum height SER2814L 0.560 / 14,22 SER2814H 0.560 / 14,22 0.655 / 16,64 SER2817H 0.270 6,9 Current Derating Temperature Rise vs Current 120 110 70 100 60 50 40 30 20 10 90 80 70 60 50 40 30 20 Isat Irms 10 0 0 0 10 20 30 Current (A rms) 40 50 60 25°C Percent of rated current Temperature rise (from 25°C) 80 -40 -20 0 20 40 60 80 Specifications subject to change without notice. Please check our website for latest information. Document 490-2 © Coilcraft, Inc. 2008 100 120 140 Ambient temperature (°C) Revised 10/20/08 Document 490-3 SMT Power Inductors - SER2800 Series L vs Frequency L vs Current 100 100 33 µH 22 µH Inductance (µH) Inductance (µH) 33 µH 15 µH 10 µH 10 6.8 µH 4.7 µH 3.3 µH 22 µH 15 µH 10 µH 10 6.8 µH 4.7 µH 3.3 µH 2.2 µH 2.2 µH 1.5 µH 1 1.5 µH SER2814L 0.1 SER2814L 1 10 1 100 0.1 Current (A) 100 Frequency (MHz) 100 100 33 µH 33 µH 22 µH Inductance (µH) Inductance (µH) 10 1 15 µH 10 µH 10 6.8 µH 4.7 µH 3.3 µH 22 µH 10 15 µH 10 µH 6.8 µH 4.7 µH 3.3 µH 1 2.2 µH 2.2 µH 1 SER2814H 0.1 0.1 10 1 100 SER2814H 0.1 Current (A) 1 100 100 100 33 µH Inductance (µH) 33 µH Inductance (µH) 10 Frequency (MHz) 22 µH 15 µH 10 µH 10 6.8 µH 4.7 µH 22 µH 10 15 µH 10 µH 6.8 µH 4.7 µH 3.3 µH 1 3.3 µH 1 SER2817H 0.1 0.1 10 1 Current (A) 100 SER2817H 0.1 1 10 Specifications subject to change without notice. Please check our website for latest information. Document 490-3 © Coilcraft, Inc. 2008 100 Frequency (MHz) Revised 10/20/08 Document 490-4 SMT Power Inductors - SER2800 Series ESR vs Frequency SER2814L 1750 1250 1000 750 6.8 4.7 µH 3.3 µH 2.2 µH µH 1.5 µH 1500 33 µH 22 15 µH µH 10 µH Equivalent Series Resistance (Ohms) 2000 500 250 0 0.1 1 10 100 1250 1000 750 3.3 µ 2.2 H µH 1500 6.8 µH 4.7 µH SER2814H 1750 10 µH 33 µH 22 µH 2000 15 µH Equivalent Series Resistance (Ohms) Frequency (MHz) 500 250 0 0.1 1 10 100 SER2817H 1750 15 µH 10 µ H 6.8 µ H 3.3 µH 4.7 µH 33 µH 2000 22 µH Equivalent Series Resistance (Ohms) Frequency (MHz) 1500 1250 1000 750 500 250 0 0.1 1 10 100 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 490-4 © Coilcraft, Inc. 2008 Revised 10/20/08