ETC SGB-4333

Product Description
Sirenza Microdevices’ SGB-4333 is a high performance
SiGe HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network
provides stable current over temperature and process Beta
variations. Designed to run directly from a 3V to 5V supply
the SGB-4333 does not require a drop resistor as compared to typical Darlington amplifiers. This robust amplifier
features a Class 1C ESD rating, low thermal resistance ,
and unconditional stability. The SGB-4333 product is
designed for high linearity 3V gain block applications that
require small size and minimal external components. It is
on chip matched to 50 ohm and an external bias inductor
choke is required for the application band.
Vbias
NC
NC
VCC
NC
DC – 3 GHz Active Bias Gain Block
Product Features
•
•
•
•
•
•
Functional Block Diagram
Active
Bias
SGB-4333
NC
High reliability SiGe HBT Technology
Robust Class 1C ESD
Simple and small size
P1dB = 10.0dBm @ 1950MHz
IP3 = 22.5 dBm @ 1950MHz
Low Thermal Resistance = 76 C/W
NC
NC
RFOUT
RFIN
Applications
NC
NC
NC
NC
NC
GND
•
•
•
3V Battery operated applications
LO buffer amp
RF pre-driver and RF receive path
Key Specifications
Symbol
fO
Parameters: Test Conditions
Z0 = 50Ω, VCC = 3.0V, Ic = 56mA, T = 30ºC)
Unit
Min.
Frequency of Operation
MHz
DC
Small Signal Gain – 850MHz
S21
Small Signal Gain – 1950MHz
dB
13.0
3000
14.5
16.0
14.0
Output Power at 1dB Compression – 850MHz
OIP3
Max.
17.5
Small Signal Gain – 2400MHz
P1dB
Typ.
Output Power at 1dB Compression – 1950MHz
11.5
dBm
8.5
10.0
Output Power at 1dB Compression – 2400MHz
9.5
Output IP3 – 850MHz
25.0
Output IP3 – 1950MHz
dB
20.0
Output IP3 – 2400MHz
22.5
21.0
IRL
Input Return Loss @ 1950MHz
dB
8.5
10.5
ORL
Output Return Loss @1950MHz
dB
8.5
10.5
Ic
Current
mA
48
56
62
NF
Noise Figure @1950MHz
dB
4.0
5.0
ºC/W
76
Rth, j-l
Thermal Resistance (junction - lead)
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or ommisions.
Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without
notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product
for use in life-support devices and/or systems.
Copyright 2002 Sirenza Microdevices, Inc. All worldwide rights reserved.
303 South Technology Court, Broomfield, CO 80021
Phone: (800) SMI-MMIC
1
http://www.sirenza.com
EDS-103087 Rev E
SGB-4333 DC-3GHz Active Bias Gain Block
Detailed Performance Table: Vcc=3V, Ic=56mA, T=25C, Z=50ohms
Symbol
Parameter
Units
100MHz
500MHz
850MHz
1950MHz
2400MHz
3500MHz
G
Small Signal Gain
dB
18.1
17.8
17.5
14.5
14.0
11.8
OIP3
Output 3rd Order Intercept Point
dBm
26.5
25.0
22.5
21.0
P1dB
Output Power at 1dB Compression
dBm
12.0
11.5
10.0
9.5
IRL
Input Return Loss
dB
17.3
15.6
14.2
10.5
10.7
8.1
ORL
Output Return Loss
dB
13.4
12.7
12.0
10.5
11.0
12.0
S12
Reverse Isolation
dB
21.1
21.5
21.9
22.7
22.8
22.9
NF
Noise Figure
dB
5.0
3.5
3.5
4.0
4.4
5.0
Pin Out Description
Pin #
Function
1,2,4, 6,
7,8,11,
12,14
Description
NC
3
RFIN
RF input pin. A DC voltage should not be connected externally to this pin
5
GND
An extra ground pin that is connected to the backside exposed paddle. Connection is optional.
10
RFOUT
RF Output pin. Bias is applied to the Darlington stage thru this pin.
13
VBIAS
This pin sources the current from the active bias circuit. Connect to pin 10 thru an inductor choke.
16
VCC
This is Vcc for the active bias circuit.
Backside
GND
The backside exposed paddle is the main electrical GND and requires multiple vias in the PC board to GND. It
is also the main thermal path.
These are no connect pins. Leave them unconnected on the PC board.
Simplified Device Schematic
16
15
14
Caution: ESD Sensitive
Appropriate precaution in handling, packaging
and testing devices must be observed.
13
Absolute Maximum Ratings
Parameters
Current (Ic total)
Active
Bias
1
12
Device Voltage (VD)
Power Dissipation
11
2
Operating Lead Temperature (TL)
RF Input Power
10
3
Storage Temperature Range
Operating Junction Temperature (TJ)
9
4
Value
Unit
120
mA
5
V
0.4
W
-40 to +85
ºC
20
dBm
-40 to +150
ºC
+150
ºC
Operation of this device beyond any one of these limits may
cause permanent damage. For reliable continuous operation
the device voltage and current must not exceed the maximum
operating values specified in the table on page one.
Bias conditions should also satisfy the following expression:
IDVD < (TJ - TL) / RTH’ j-l
5
6
7
8
303 South Technology Court, Broomfield, CO 80021
Phone: (800) SMI-MMIC
2
http://www.sirenza.com
EDS-103087 Rev E
SGB-4333 DC-3GHz Active Bias Gain Block
Evaluation Board Data (Vcc=VBIAS = 3.0V, Ic = 56mA) Bias Tee substituted for DC feed inductor (L1)
OIP3 vs. Frequency
Gain vs Frequency
19.0
30.0
28.0
18.0
26.0
24.0
OIP3 (dBm)
Gain (dB)
17.0
16.0
15.0
14.0
13.0
22.0
20.0
18.0
+25c
16.0
+25c
+85c
14.0
+85c
-40C
-40C
12.0
12.0
10.0
0.4
0.9
1.4
1.9
2.4
0.4
0.9
1.4
Frequency (GHz)
P1dB vs. Frequency
2.4
Noise Figure vs. Frequency
13.0
7.0
6.0
Noise Figure (dB)
12.0
P1dB (dBm)
1.9
Frequency (GHz)
11.0
10.0
9.0
+25c
5.0
4.0
3.0
+25c
+85c
2.0
-40c
+85c
8.0
1.0
-40C
7.0
0.0
0.4
0.9
1.4
1.9
2.4
0.0
0.5
Frequency (GHz)
1.0
1.5
2.0
2.5
3.0
3.5
Frequency (GHz)
Current vs. Voltage
Ic vs. Temperature
0.100
0.090
0.0630
0.080
0.0620
0.070
0.060
0.0600
Ic (A)
Ic (mA)
0.0610
0.0590
0.050
0.040
0.0580
0.030
0.0570
0.020
0.0560
0.010
0.0550
+85c
+25c
-40c
Temperature
303 South Technology Court, Broomfield, CO 80021
0.000
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
Vc (Volts)
Phone: (800) SMI-MMIC
3
http://www.sirenza.com
EDS-103087 Rev E
SGB-4333 DC-3GHz Active Bias Gain Block
Evaluation Board Data (Vcc=VBIAS = 3.0V, Ic = 56mA) Bias Tee substituted for DC feed inductor (L1)
l S21 l vs. Frequency
l S11 l vs. Frequency
20.0
0.0
18.0
+25c
16.0
-5.0
+85c
14.0
S 11 (dB)
S 21 (dB)
-40c
12.0
10.0
8.0
-10.0
-15.0
+25c
6.0
4.0
+85c
-20.0
-40c
2.0
0.0
-25.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
Frequency (GHz)
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
l S12 l vs. Frequency
l S22 l vs. Frequency
-10.0
0.0
-12.0
-2.0
-14.0
-4.0
+25c
-16.0
-18.0
-6.0
S 22 (dB)
S12 (dB)
+85c
-40c
-20.0
-22.0
+25c
-8.0
+85c
-40c
-10.0
-24.0
-12.0
-26.0
-14.0
-28.0
-16.0
-30.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
303 South Technology Court, Broomfield, CO 80021
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
Phone: (800) SMI-MMIC
4
http://www.sirenza.com
EDS-103087 Rev E
SGB-4333 DC-3GHz Active Bias Gain Block
Typical Evaluation Board Schematic for 3.0V
Vcc
C4
C3
16
Vbias
NC
NC
VCC
1
L1
NC
NC
NC
NC
RFOUT
RFIN
RFIN
C1
RFOUT
NC
NC
NC
NC
Optional
GND
C2
NC
Evaluation Board - Board material GETEK, 31mil thick, Dk=4.2, 1 oz. copper
Component Values By Band
C4
C3
1
303 South Technology Court, Broomfield, CO 80021
500MHz
850MHz
C3
1000pF
1000pF
1950MHz 2400MHz
1000pF
1000pF
C4*
1uF
1uF
1uF
1uF
C1, C2
220pF
68pF
43pF
22pF
L1
68 nH
33nH
22nH
18nH
* C4 is optional depending on application and filtering. Not
required for SGB device operation.
L1
C1
Designator
C2
Phone: (800) SMI-MMIC
5
Note: The amplifier can be run from a 5V supply by simply
inserting a 33 ohm resistor in series with Vcc.
http://www.sirenza.com
EDS-103087 Rev E
SGB-4333 DC-3GHz Active Bias Gain Block
Part Number Ordering Information
Part Marking
Part Number
Reel Size
Devices/Reel
SGB-4333
13”
3000
The part will be symbolized with an “SGB-4333” marking designator on the top surface of the package.
Package Outline Drawing (Dimensions in mm)
Recommended Land Pattern (dimensions in mm[in].):
Recommended PCB Soldermask (SMOBC)
for Land Pattern(dimensions in mm[in]):
1.58 [0.062]
0.50 [0.020]
0.26 [0.010]
0.50 [0.020]
0.38 [0.015]
0.25 [0.010]
0.53 [0.021]
0.29 [0.011]
0.21 [0.008]
1.58 [0.062]
0.75 [0.030]
0.005 CHAMFER
(8PL)
3.17 [0.125]
Ø0.38 [Ø0.015]
Plated Thru (4PL)
303 South Technology Court, Broomfield, CO 80021
Phone: (800) SMI-MMIC
6
1.20 [0.047]
0.46 [0.018]
1.20 [0.047]
http://www.sirenza.com
EDS-103087 Rev E