SHD218602 SHD218602A SHD218602B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 863, REV - HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 100 Volt, 0.020 Ohm MOSFET • Isolated and Hermetically Sealed • Surface Mount Package MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT VGS=10V, TC = 25°C VGS=10V, TC = 100°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C SYMBOL VGS ID MIN. - TYP. - UNITS Volts Amps - MAX. ±20 75 60 300 +150 0.30 300 IDM TOP/TSTG RθJC PD -55 - BVDSS 100 - - Volts - - Amps °C °C/W Watts ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250μA DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 37.5A VGS = 10V, ID = 37.5A, TJ = 125°C GATE THRESHOLD VOLTAGE VDS = VGS, ID = 1mA FORWARD TRANSCONDUCTANCE VDS ≥ 10V, ID = 75A ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C (VDS = 0.8xMax. Rating, VGS = 0V), TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TOTAL GATE CHARGE VGS = 10 V, GATE TO SOURCE CHARGE VDS = 50V, GATE TO DRAIN CHARGE ID =37.5A TURN ON DELAY TIME VDD = 250V, RISE TIME ID = 3.7A, TURN OFF DELAY TIME RG = 2.0Ω, FALL TIME VGS = 15V DIODE FORWARD VOLTAGE TJ = 25°C, IF =, IS VGS = 0V REVERSE RECOVERY TIME TJ = 25°C, IS = 10A, di/dt ≤ = 100A/μsec, REVERSE RECOVERY CHARGE INPUT CAPACITANCE VGS = 0V, VDS = 25V, OUTPUT CAPACITANCE f=1MHz REVERSE TRANSFER CAPACITANCE RDS(ON) VGS(th) gfs 2.0 25 - IDSS - - IGSS - - Qg Qgs Qgd td(ON) tr td(OFF) tf VSD - trr Qrr Ciss Coss Crss Ω 0.02 0.035 4.0 - Volts S(1/Ω) - 180 36 85 20 40 50 20 - 250 1000 100 -100 260 70 160 30 40 75 40 1.3 Volts - - 200 nsec 1.4 - μC - - 4500 1600 800 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • μA nA nC nsec pF SHD218602 SHD218602A SHD218602B SENSITRON DATA SHEET 863 REVISION - MECHANICAL DIMENSIONS: in Inches / mm .520±.020 (13.2±.508) .510±.020 (12.9±.508) .370±.010 (9.40±.254) .090±.010 (2.29±.254) .370±.010 (9.40±.254) .125±.010 (3.17±.254) .370±.010 (9.40±.254) .030±.010 (.762±.254) .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) .320±.010 (8.13±.254) .610±.010 (15.5±.254) 2 2 .030±.010 (.762±.254) 2 .030±.010 (.762±.254) 3 3 .610±.010 (15.5 ±.254) 3 Copper Terminals .110 (2.79) Max Moly Lid .020±.005 R (.508±.127 ) Alumina Ring .110 (2.80) Max Moly Lid .020±.005 R (.508±.127 ) Alumina Ring Alumina Ring Moly Base Terminal 1 .020±.002 (.508±.051) .060±.010 (1.52±.254) Terminal 1 .130 (3.30) Max .015±.002 (.381±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) SHD-5/5A/5B PINOUT TABLE DEVICE TYPE MOSFET SHD-5/A/B PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •