SiHG24N65E www.vishay.com Vishay Siliconix E Series Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) at TJ max. • Halogen-free According to IEC 61249-2-21 Definition • Low Figure-of-Merit (FOM) Ron x Qg 700 RDS(on) max. at 25 °C () VGS = 10 V 0.145 Qg max. (nC) 122 Qgs (nC) 21 Qgd (nC) • • • • • 37 Configuration Single D Low Input Capacitance (Ciss) Reduced Switching and Conduction Losses Ultra Low Gate Charge (Qg) Avalanche Energy Rated (UIS) Compliant to RoHS Directive 2002/95/EC APPLICATIONS TO-247AC • • • • Server and Telecom Power Supplies Switch Mode Power Supplies (SMPS) Power Factor Correction Power Supplies (PFC) Lighting - High-Intensity Discharge (HID) - Fluorescent Ballast Lighting • Industrial - Welding - Induction Heating - Motor Drives - Battery Chargers - Renewable Energy - Solar (PV Inverters) G S S D G N-Channel MOSFET ORDERING INFORMATION Package TO-247AC Lead (Pb)-free and Halogen-free SiHG24N65E-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL Drain-Source Voltage VDS Gate-Source Voltage VGS Gate-Source Voltage AC (f > 1 Hz) Continuous Drain Current (TJ = 150 °C) Pulsed Drain VGS at 10 V TC = 25 °C TC = 100 °C Currenta ID LIMIT UNIT 650 ± 20 V 30 24 A 16 IDM 70 2 W/°C Single Pulse Avalanche Energyb EAS 508 mJ Maximum Power Dissipation PD 250 W TJ, Tstg - 55 to + 150 °C Linear Derating Factor Operating Junction and Storage Temperature Range Drain-Source Voltage Slope TJ = 125 °C Reverse Diode dV/dtd Soldering Recommendations (Peak Temperature) for 10 s dV/dt 37 V/ns 11 300c °C Notes a. Repetitive rating; pulse width limited by maximum junction temperature. b. VDD = 50 V, starting TJ = 25 °C, L = 28.2 mH, Rg = 25 , IAS = 6 A. c. 1.6 mm from case. d. ISD ID, dI/dt = 100 A/μs, starting TJ = 25 °C. S11-2088 Rev. B, 31-Oct-11 1 Document Number: 91476 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHG24N65E www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 62 Maximum Junction-to-Case (Drain) RthJC - 0.5 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage (N) Gate-Source Leakage Zero Gate Voltage Drain Current VDS VGS = 0 V, ID = 250 μA 650 - - V VDS/TJ Reference to 25 °C, ID = 250 μA - 0.72 - V/°C VGS(th) VDS = VGS, ID = 250 μA 2 - 4 V nA VGS = ± 20 V - - ± 100 VDS = 650 V, VGS = 0 V - - 1 VDS = 520 V, VGS = 0 V, TJ = 125 °C - - 10 IGSS IDSS μA - 0.120 0.145 gfs VDS = 8 V, ID = 5 A - 7.1 - S Input Capacitance Ciss 2740 - Coss - 122 - Reverse Transfer Capacitance Crss VGS = 0 V, VDS = 100 V, f = 1 MHz - Output Capacitance Total Gate Charge Qg Drain-Source On-State Resistance Forward Transconductance RDS(on) VGS = 10 V ID = 12 A Dynamic VGS = 10 V 4 - 81 122 - 21 - - 37 - Gate-Source Charge Qgs Gate-Drain Charge Qgd Turn-On Delay Time td(on) - 24 48 tr - 84 126 - 70 105 - 69 104 - 0.68 - - - 24 - - 96 - - 1.2 V - 517 - ns - 9.7 - μC - 30 - A Rise Time Turn-Off Delay Time VDD = 520 V, ID = 24 A, VGS = 10 V, Rg = 9.1 td(off) Fall Time tf Gate Input Resistance Rg ID = 24 A, VDS = 520 V - pF f = 1 MHz, open drain nC ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Current ISM Diode Forward Voltage VSD Reverse Recovery Time trr Reverse Recovery Charge Qrr Reverse Recovery Current IRRM MOSFET symbol showing the integral reverse p - n junction diode D A G S TJ = 25 °C, IS = 24 A, VGS = 0 V TJ = 25 °C, IF = IS = 24 A, dI/dt = 100 A/μs, VR = 20 V The information shown here is a preliminary product proposal, not a commercial product datasheet. Vishay Siliconix is not committed to produce this or any similar product. This information should not be used for design purposes, nor construed as an offer to furnish or sell such products. S11-2088 Rev. B, 31-Oct-11 2 Document Number: 91476 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHG24N65E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 3 TOP 15 V 14 V 13 V 12 V 60 TJ = 25 °C ID = 24 A RDS(on), Drain-to-Source On Resistance (Normalized) ID, Drain-to-Source Current (A) 80 11 V 40 10 V 20 9V 2.5 2 1.5 1 VGS = 10 V 0.5 5V 0 0 0 5 10 15 20 25 - 60 - 40 - 20 0 30 TJ, Junction Temperature (°C) Fig. 1 - Typical Output Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature 10 000 TOP 15 V 14 V 13 V 12 V 11 V 10 V TJ = 150 °C Ciss Capacitance (pF) ID, Drain-to-Source Current (A) 60 40 20 40 60 80 100 120 140 160 VDS, Drain-to-Source Voltage (V) 9V 20 VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd 1000 Coss 100 10 8V Crss 5V 1 0 0 5 10 15 20 25 30 0 VDS, Drain-to-Source Voltage (V) 200 400 300 500 600 VDS, Drain-to-Source Voltage (V) Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 2 - Typical Output Characteristics 80 24 VGS, Gate-to-Source Voltage (V) ID, Drain-to-Source Current (A) 100 60 40 TJ = 150 °C 20 TJ = 25 °C 0 VDS = 520 V VDS = 335 V VDS = 130 V 20 16 12 8 4 0 0 5 10 15 20 25 0 VDS, Drain-to-Source Voltage (V) 60 90 120 150 Qg, Total Gate Charge (nC) Fig. 3 - Typical Transfer Characteristics S11-2088 Rev. B, 31-Oct-11 30 Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage 3 Document Number: 91476 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHG24N65E www.vishay.com Vishay Siliconix 25 ID, Drain Current (A) ISD, Reverse Drain Current (A) 100 TJ = 150 °C 10 TJ = 25 °C 1 20 15 10 5 VGS = 0 V 0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 25 1.6 VSD, Source-Drain Voltage (V) 75 100 125 150 TJ, Case Temperature (°C) Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 9 - Maximum Drain Current vs. Case Temperature 825 1000 Operation in this area limited by RDS(on) 800 VDS, Drain-to-Source Brakdown Voltage (V) ID, Drain Current (A) 50 100 10 100 μs Limited by RDS(on)* 1 TC = 25 °C TJ = 150 °C Single Pulse BVDSS Limited 1 ms 775 750 725 700 675 10 ms 0.1 650 - 60 - 40 - 20 0 1 10 100 1000 VDS, Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 20 40 60 80 100 120 140 160 TJ, Junction Temperature (°C) Fig. 8 - Maximum Safe Operating Area Fig. 10 - Temperature vs. Drain-to-Source Voltage Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 0.0001 0.001 0.01 0.1 1 Pulse Time (s) Fig. 11 - Normalized Thermal Transient Impedance, Junction-to-Case S11-2088 Rev. B, 31-Oct-11 4 Document Number: 91476 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHG24N65E www.vishay.com Vishay Siliconix RD VDS QG 10 V VGS D.U.T. RG QGS + - VDD QGD VG 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Charge Fig. 12 - Switching Time Test Circuit Fig. 16 - Basic Gate Charge Waveform Current regulator Same type as D.U.T. VDS 90 % 50 kΩ 12 V 0.2 µF 0.3 µF + 10 % VGS D.U.T. td(on) td(off) tf tr - VDS VGS 3 mA Fig. 13 - Switching Time Waveforms IG ID Current sampling resistors Fig. 17 - Gate Charge Test Circuit L Vary tp to obtain required IAS VDS D.U.T RG + - IAS V DD 10 V 0.01 Ω tp Fig. 14 - Unclamped Inductive Test Circuit VDS tp VDD VDS IAS Fig. 15 - Unclamped Inductive Waveforms S11-2088 Rev. B, 31-Oct-11 5 Document Number: 91476 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiHG24N65E www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop ISD Ripple ≤ 5 % Note a. VGS = 5 V for logic level devices Fig. 18 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91476. S11-2088 Rev. B, 31-Oct-11 6 Document Number: 91476 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix TO-247AC (HIGH VOLTAGE) A A 4 E B 3 R/2 E/2 7 ØP Ø k M DBM A2 S (Datum B) ØP1 A D2 Q 5 2xR (2) D1 D 1 2 4 D 3 Thermal pad 5 L1 C L See view B 2 x b2 3xb 0.10 M C A M 5 E1 A 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Planting D DE Base metal E C (c) C c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B MILLIMETERS DIM. MIN. MAX. INCHES MIN. MILLIMETERS MAX. DIM. MIN. INCHES MAX. MIN. MAX. A 4.65 5.31 0.183 0.209 D2 0.51 1.30 0.020 0.051 A1 2.21 2.59 0.087 0.102 E 15.29 15.87 0.602 0.625 A2 1.50 2.49 0.059 0.098 E1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 BSC b1 0.99 1.35 0.039 0.053 Øk b2 1.65 2.39 0.065 0.094 L 14.20 16.10 b3 1.65 2.37 0.065 0.093 L1 3.71 4.29 b4 2.59 3.43 0.102 0.135 N 0.215 BSC 0.254 0.010 7.62 BSC 0.559 0.634 0.146 0.169 0.300 BSC b5 2.59 3.38 0.102 0.133 ØP 3.56 3.66 0.140 0.144 c 0.38 0.86 0.015 0.034 Ø P1 - 7.39 - 0.291 c1 0.38 0.76 0.015 0.030 Q 5.31 5.69 0.209 0.224 D 19.71 20.70 0.776 0.815 R 4.52 5.49 0.178 0.216 D1 13.08 - 0.515 - S 5.51 BSC 0.217 BSC ECN: S-81920-Rev. A, 15-Sep-08 DWG: 5971 Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Contour of slot optional. 3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body. 4. Thermal pad contour optional with dimensions D1 and E1. 5. Lead finish uncontrolled in L1. 6. Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154"). 7. Outline conforms to JEDEC outline TO-247 with exception of dimension c. Document Number: 91360 Revision: 15-Sep-08 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1