SN74AHC1G09 SCLS724B – MAY 2011 – REVISED JULY 2011 www.ti.com SINGLE 2–INPUT POSITIVE–AND GATE WITH OPEN DRAIN OUTPUT Check for Samples: SN74AHC1G09 FEATURES • 1 • • • • Operating Range 2-V to 5.5-V Max tpd of 6 ns at 5-V ±8-mA Output Drive at 5-V Schmitt-Trigger Action at All Inputs Makes the Circuit Tolerant for Slower Input Rise and Fall Time • Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) DCK PACKAGE (TOP VIEW) DBV PACKAGE (TOP VIEW) A 1 B 2 GND 3 A 1 B 2 GND 3 5 V CC 4 Y V CC 5 Y 4 DESCRIPTION/ORDERING INFORMATION Single 2-input Positive–AND Gate With open drain output. ORDERING INFORMATION TA –55°C to 125°C (1) (2) PACKAGE ORDERABLE PART NUMBER (1) TOP-SIDE MARKING (2) SOT (SOT-23) – DBV Reel of 3000 SN74AHC1G09DBVR A09_ SOT (SC-70) – DCK Reel of 3000 SN74AHC1G09DCKR AJ_ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. The actual top-side marking has one additional character that designates the assembly/test site. FUNCTION TABLE INPUTS (1) OUTPUTY A B Y H H H(Z) (1) L X L X L L High impedance output state. Requires a pull-up resistor to get a high. LOGIC DIAGRAM A B 1 2 4 Y 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2011, Texas Instruments Incorporated SN74AHC1G09 SCLS724B – MAY 2011 – REVISED JULY 2011 www.ti.com ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VALUE UNIT Supply voltage range, VCC –0.5 to 7 V Input voltage range, VI (2) –0.5 to 7 V Output voltage range, VO (2) –0.5 to VCC + 0.7 V Input clamp current, IIK (VI < 0) –20 mA Output clamp current, IOK (VO < 0 or VO > VCC) –20 mA Continuous output current, IO (VO = 0 to VCC) ±25 mA Continuous current through VCC or GND ±50 mA Package thermal impedance, θJA Storage temperature range, Tstg (1) (2) (3) 2 (3) 206 DCK package (3) 252 DBV package –65 to 150 °C/W °C Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. Copyright © 2011, Texas Instruments Incorporated SN74AHC1G09 SCLS724B – MAY 2011 – REVISED JULY 2011 www.ti.com RECOMMENDED OPERATING CONDITIONS (1) MIN VCC MAX Supply voltage 2 VIH VCC = 2 V 1.5 VCC = 3 V 2.1 VCC = 5.5 V UNIT 5.5 V V 3.85 VCC = 2 V 0.5 VCC = 3 V 0.9 VIL Low-level Input voltage VI Input Voltage 0 5.5 V VO Output voltage 0 5.5 V 50 µA IOL Low-level output current VCC = 5.5 V 1.65 VCC = 2 V Δt/Δv Input Transition rise or fall rate TA Operating free-air temperature (1) V VCC = 3.3 V ± 0.3 V 4 VCC = 5 V ± 0.5 V 8 VCC = 3.3 V ± 0.3 V mA 100 VCC = 5 V ± 0.5 V ns/V 20 –55 °C 125 All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS TA = 25°C VCC MIN IOL = 50 µA VOL II TYP MAX TA = –40°C to 85°C TA = –55°C to 125°C MIN MIN MAX UNIT MAX 2V 0.1 0.1 0.1 3V 0.1 0.1 0.1 4.5 V 0.1 0.1 0.1 IOL = 4 mA 3V 0.36 0.44 0.55 IOL = 8 mA 4.5 V 0.36 0.44 0.55 0 V to 5.5 V ±0.1 ±1 ±2 µA 1 10 20 µA 10 10 10 pF VI = 5.5 V or GND ICC VI = VCC or GND, IO = 0 Ci VI = VCC or GND Copyright © 2011, Texas Instruments Incorporated 5.5 V 5V 4 V 3 SN74AHC1G09 SCLS724B – MAY 2011 – REVISED JULY 2011 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER tPD TA = –40°C to 85°C TA = 25°C TA = –55°C to 125°C FROM (INPUT) TO (OUTPUT) OUTPUT CAPACITANCE A or B Y CL = 15 pF 3.6 7.0 1.0 8.0 1.0 8.5 ns A or B Y CL = 50 pF 6.5 11.0 1.5 12.0 1.5 12.5 ns MIN TYP MAX MIN MAX MIN UNIT MAX SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPD FROM (INPUT) TO (OUTPUT) OUTPUT CAPACITANCE A or B Y A or B Y TA = –40°C to 85°C TA = 25°C MIN MIN MAX TA = –55°C to 125°C MIN UNIT TYP MAX MAX CL = 15 pF 2.5 5.0 1.0 6.0 1.0 6.5 ns CL = 50 pF 4.6 7.5 1.5 8.0 1.5 8.5 ns OPERATING CHARACTERISTICS VCC = 5 V, TA = 25°C PARAMETER Cpd 4 Power dissipation capacitance TEST CONDITIONS No load, f = 1 MHz TYP 5 UNIT pF Copyright © 2011, Texas Instruments Incorporated SN74AHC1G09 SCLS724B – MAY 2011 – REVISED JULY 2011 www.ti.com PARAMETER MEASUREMENT INFORMATION VCC RL = 1 kΩ From Output Under Test Test Point From Output Under Test S1 Open TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS VCC 50% VCC Timing Input tw tsu VCC 50% VCC 50% VCC Input 0V th VCC 50% VCC Data Input 50% VCC 0V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATION VCC 50% VCC Input 50% VCC 0V tPLH tPHL VOH In-Phase Output 50% VCC tPHL Out-of-Phase Output 50% VCC VOL Output Waveform 1 S1 at VCC (see Note B) VOH 50% VCC VOL 50% VCC tPZL tPLZ ≈VCC 50% VCC Output Waveform 2 S1 at GND (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 50% VCC 0V tPZH tPLH 50% VCC VCC Output Control VOL + 0.3 V tPHZ 50% VCC VOH − 0.3 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time with one input transition per measurement. E. All parameters and waveforms are not applicable to all devices. Since this device has open-drain outputs, tPLZ and tPZL are the same as tPD. G. tPZL is measured at VCC/2. H. tPLZ is measured at VOL + 0.3 V. VOH ≈0 V A. F. VOL Figure 1. Load Circuit and Voltage Waveforms Copyright © 2011, Texas Instruments Incorporated 5 PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp SN74AHC1G09DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AHC1G09DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (3) Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ SN74AHC1G09DBVR SOT-23 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 SN74AHC1G09DBVR SOT-23 DBV 5 3000 178.0 9.2 3.3 3.2 1.55 4.0 8.0 Q3 SN74AHC1G09DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 SN74AHC1G09DCKR SC70 DCK 5 3000 178.0 9.2 2.4 2.4 1.22 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Mar-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AHC1G09DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 SN74AHC1G09DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 SN74AHC1G09DCKR SC70 DCK 5 3000 180.0 180.0 18.0 SN74AHC1G09DCKR SC70 DCK 5 3000 180.0 180.0 18.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated