SP-200 200W Single Output with PFC Function series Features : Universal AC input / full range Built-in active PFC function, PF>0.93 Protections: Short circuit / Overload / Over voltage / Over temperature Built-in cooling fan speed control Built-in constant current limiting circuit Built-in fan speed control Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL SP-200-3.3 SP-200-5 SP-200-7.5 SP-200-12 SP-200-13.5 SP-200-15 SP-200-24 SP-200-27 SP-200-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 40A 40A 26.7A 16.7A 14.9A 13.4A 8.4A 7.5A 4.2A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 26.7A 0 ~ 16.7A 0 ~ 14.9A 0 ~ 13.4A 0 ~ 8.4A 0 ~ 7.5A 0 ~ 4.2A RATED POWER 132W 200W 200.25W 200.4W 201.15W 201W 201.6W 202.5W 201.6W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT INPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 600ms, 30ms at full load HOLD UP TIME (Typ.) 20ms at full load VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 65% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3.5A/115VAC 1.7A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER TEMPERATURE SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY MTBF NOTE 120 ~ 370VDC PF>0.98/115VAC at full load 71% 76% 79% 80% 81% 83% 83% 84% 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW1 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V LINE REGULATION PROTECTION OVER VOLTAGE FUNCTION 3.14 ~ 3.63V 4.75 ~ 5.5V 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, CCC GB4943 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A DIMENSION 183.8K hrs min. MIL-HDBK-217F (25 199*99*50mm (L*W*H) PACKING 0.85Kg; 20pcs/17.9Kg/1.28CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:SP-200-SPEC 2011-08-23 SP-200 200W Single Output with PFC Function Mechanical Specification Case No. 916B series Unit:mm 199 20 35 133 25 117 70 48.5 65 CN1 35.2 1 2 99 119 79 2-M4 L=5mm 5-M3 L=3mm 16 10 49.5 8 9.5 7 6 5 4 3 2 1 51 LED 38 R.C. +V ADJ. Terminal Pin No. Assignment 15 Pin No. 1 2 3 142 25 Air flow direction 11 max. Assignment AC/L AC/N FG Pin No. 4,5 6,7 Assignment DC OUTPUT -V DC OUTPUT +V Pin No. 1 2 12.5 25 50 25 Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional) Assignment RC+ RC- Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent 6-M4 L=6mm Block Diagram FAN SPEED CONTROL EMI FILTER & RECTIFIERS I/P PFC CIRCUIT FG RECTIFIERS & FILTER POWER SWITCHING O.L.P. ACTIVE START CIRCUIT PFC fosc : 67KHz PWM fosc : 134KHz FAN +V -V CONSTANT CURRENT LIMITING & DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. Derating Curve REMOTE CONTROL CN1 Output Derating VS Input Voltage 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -10 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 (HORIZONTAL) 60 50 40 85 100 115 135 155 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:SP-200-SPEC 2011-08-23