STA92N Semiconductor PNP Silicon Transistor Descriptions • High voltage application Features • High collector-emitter voltage : VCEO=-300V • Complementary pair with STC42N Ordering Information Type NO. Marking Package Code STA92N STA92 T0-92N Outline Dimensions unit : mm 4.20~4.40 4.20~4.40 2.25 Max. 2.14 Typ. 13.50~14.50 0.52 Max. 0.90 Max. 1.27 Typ. 1 2 3 0.40 Max. 3.09~3.29 3.55 Typ PIN Connections 1. Emitter 2. Base 3. Collector KSD-T0C029-001 1 STA92N Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO -300 V Collector-emitter voltage VCEO -300 V Emitter-base voltage VEBO -6 V Collector current IC -500 mA Collector power dissipation PC 400 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO Test Condition IC=-1mA, IB=0 Min. Typ. Max. Unit -300 - - V Collector cut-off current ICBO VCB=-300V, IE=0 - - -0.1 µA Emitter cut-off current IEBO VEB=-6V, IC=0 - - -0.1 µA DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage * VCE=-10V, IC=-30mA 40 - - - VCE(sat) * IC=-20mA, IB=-2mA - - -0.5 V VBE(sat) * IC=-20mA, IB=-2mA - - -0.9 V hFE Base-emitter voltage VBE VCE=-10V, IC=-30mA - -0.7 -0.9 V Transition frequency fT VCE=-20V, IC=-10mA - 80 - MHz VCB=-20V, IE=0, f=1MHz - 3 - pF Collector output capacitance Cob * : Pulse Tester : Pulse Width≤ 300 ㎲, Duty Cycle≤ 2.0% KSD-T0C029-001 2 STA92N Electrical Characteristic Curves Fig. 2 VCE(sat),VBE(sat) - IC Fig. 1 hFE - IC Fig. 4 Cob - VCB Fig. 3 fT - IC The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0C029-001 3