STD3NA50 N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTOR TYPE V DSS R DS( on) ID STD3NA50 500 V < 3Ω 2.7 A ■ ■ ■ ■ ■ ■ ■ TYPICAL RDS(on) = 2.4 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC APPLICATION ORIENTED CHARACTERIZATION THROUGH-HOLE IPAK (TO-251) POWER PACKAGE IN TUBE (SUFFIX ”-1”) SURFACE-MOUNTING DPAK (TO-252) POWER PACKAGE IN TAPE & REEL (SUFFIX ”T4”) 3 1 IPAK TO-251 (Suffix ”-1”) APPLICATIONS HIGH SPEED SWITCHING ■ UNINTERRUPTIBLE POWER SUPPLY (UPS) ■ MOTOR CONTROL, AUDIO AMPLIFIERS ■ INDUSTRIAL ACTUATORS ■ DC-DC & DC-AC CONVERTERS FOR TELECOM, INDUSTRIAL AND CONSUMER ENVIRONMENT ■ PARTICULARLY SUITABLE FOR ELECTRONIC FLUORESCENT LAMP BALLASTS 3 2 1 DPAK TO-252 (Suffix ”T4”) ■ INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VD S V DG R V GS Value Unit Drain-source Voltage (V GS = 0) Parameter 500 V Drain- gate Voltage (R GS = 20 kΩ) 500 V ± 30 V Gate-source Voltage o ID Drain Current (continuous) at T c = 25 C 2.7 A ID Drain Current (continuous) at T c = 100 oC 1.7 A Drain Current (pulsed) 10.8 A Total Dissipation at Tc = 25 C 50 W Derating Factor 0.4 W/o C ID M(•) P tot T stg Tj o Storage Temperature Max. Operating Junction Temperature -65 to 150 o C 150 o C (•) Pulse width limited by safe operating area November 1996 1/10 STD3NA50 THERMAL DATA R thj-cas e Rthj- amb Rthj- amb Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Thermal Resistance Case-sink Maximum Lead Temperature For Soldering Purpose Max Max Typ o 2.5 80 0.7 275 C/W C/W o C/W o C o AVALANCHE CHARACTERISTICS Symbol Parameter Max Value Unit IA R Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, δ < 1%) 2.7 A E AS Single Pulse Avalanche Energy (starting T j = 25 o C, ID = I AR, VD D = 50 V) 40 mJ E AR Repetitive Avalanche Energy (pulse width limited by T j max, δ < 1%) 2 mJ IA R Avalanche Current, Repetitive or Not-Repetitive (T c = 100 o C, pulse width limited by T j max, δ < 1%) 1.7 A ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbol V( BR)DSS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 µA VG S = 0 I DS S Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 IG SS Gate-body Leakage Current (V D S = 0) Min. Typ. Max. 500 Unit V T c = 125 oC V GS = ± 30 V 25 250 µA µA ± 100 nA ON (∗) Symbol Parameter Test Conditions V G S(th) Gate Threshold Voltage V DS = V GS ID = 250 µA R DS( on) Static Drain-source On Resistance V GS = 10V ID = 1.5 A I D( on) On State Drain Current V DS > ID( on) x RD S(on) max V GS = 10 V Min. Typ. Max. Unit 2.25 3 3.75 V 2.4 3 Ω 3.3 A DYNAMIC Symbol gfs (∗) C iss C oss C rss 2/10 Parameter Test Conditions Forward Transconductance V DS > ID( on) x RD S(on) max Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS = 25 V f = 1 MHz ID = 1.5 A VG S = 0 Min. Typ. 1.2 2.2 370 62 20 Max. Unit S 485 81 27 pF pF pF STD3NA50 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt) on Qg Q gs Q gd Parameter Test Conditions Min. Typ. Max. Unit 20 30 ns ns Turn-on Time Rise Time V DD = 250 V I D = 1.5 A VGS = 10 V R G = 18 Ω (see test circuit, figure 3) 14 23 Turn-on Current Slope V DD = 400 V I D = 3 A VGS = 10 V R G = 18 Ω (see test circuit, figure 5) 340 Total Gate Charge Gate-Source Charge Gate-Drain Charge V DD = 400 V ID = 3 A V GS = 10 V A/µs 21 6 9 28 nC nC nC Typ. Max. Unit 13 11 26 18 16 35 ns ns ns Typ. Max. Unit 2.7 10.8 A A 1.6 V SWITCHING OFF Symbol t r(Vof f) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions Min. V DD = 400 V I D = 3 A R G = 18 Ω VGS = 10 V (see test circuit, figure 5) SOURCE DRAIN DIODE Symbol Parameter Test Conditions IS D I SDM(•) Source-drain Current Source-drain Current (pulsed) V S D (∗) Forward On Voltage I SD = 2.7 A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 3 A di/dt = 100 A/µs V DD = 100 V T j = 150 o C (see test circuit, figure 5) t rr Q rr I RRM Min. V GS = 0 350 ns 4.2 µC 24 A (∗) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % (•) Pulse width limited by safe operating area Safe Operating Area Thermal Impedance 3/10 STD3NA50 Derating Curve Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage 4/10 STD3NA50 Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time 5/10 STD3NA50 Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics Fig. 1: Unclamped Inductive Load Test Circuits 6/10 Fig. 2: Unclamped Inductive Waveforms STD3NA50 Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge Test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/10 STD3NA50 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch MAX. MIN. A 2.2 TYP. 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 TYP. MAX. 0.85 B5 0.033 0.3 0.012 B6 0.95 0.037 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B6 = 1 = 2 G = = = E B2 = 3 B5 L D B3 L2 L1 0068771-E 8/10 STD3NA50 TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.9 0.025 0.035 B2 5.2 5.4 0.204 0.212 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 9.35 10.1 0.368 0.397 L2 0.8 L4 0.031 0.6 1 0.023 0.039 A1 C2 A H A2 C DETAIL ”A” L2 D = = G 2 1 B2 = = = E = 3 B DETAIL ”A” L4 0068772-B 9/10 STD3NA50 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 10/10