STGD3HF60HD 4.5 A, 600 V very fast IGBT with Ultrafast diode Features ■ Minimal tail current ■ Low conduction and switching losses ■ Ultrafast soft recovery antiparallel diode TAB 3 Applications 1 Motor drive DPAK Description The STGD3HF60HD is based on a new advanced planar technology concept to yield an IGBT with more stable switching performance (Eoff) versus temperature, as well as lower conduction losses. Figure 1. Table 1. Internal schematic diagram Device summary Order codes Marking Package Packaging STGD3HF60HDT4 GD3HF60HD DPAK Tape and reel December 2010 Doc ID 17690 Rev 3 1/16 www.st.com 16 Contents STGD3HF60HD Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/16 ............................................... 8 Doc ID 17690 Rev 3 STGD3HF60HD 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol VCES Parameter Value Unit Collector-emitter voltage (VGE = 0) 600 V IC (1) Continuous collector current at TC = 25 °C 7.5 A IC (1) Continuous collector current at TC = 100 °C 4.5 A ICL(2) Turn-off latching current 18 A (3) Pulsed collector current 18 A Gate-emitter voltage ±20 V Diode RMS forward current at TC = 25 °C 10 A IFSM Surge non repetitive forward current tp=10ms sinusoidal 25 A PTOT Total dissipation at TC = 25 °C 38 W Tj Operating junction temperature - 55 to 150 °C Value Unit Thermal resistance junction-case IGBT 3.3 °C/W Thermal resistance junction-case diode 5 °C/W 100 °C/W ICP VGE IF 1. Calculated according to the iterative formula: T j ( max ) – T C I C ( T C ) = --------------------------------------------------------------------------------------------------------R thj – c × V CE ( sat ) ( max ) ( T j ( max ), I C ( T C ) ) 2. Vclamp = 80%,(VCES), Tj =150°C, RG = 10 Ω, VGE = 15 V. 3. Pulse width limited by maximum junction temperature and turn-off within RBSOA. Table 3. Symbol Rthj-case Rthj-amb Thermal data Parameter Thermal resistance junction-ambient Doc ID 17690 Rev 3 3/16 Electrical characteristics 2 STGD3HF60HD Electrical characteristics (Tj=25 °C unless otherwise specified). Table 4. Symbol Static electrical characteristics Parameter Test conditions Collector-emitter V(BR)CES breakdown voltage (VGE = 0) VCE(sat) Collector-emitter saturation voltage VGE= 15 V, IC= 0.5 A, Tj=125°C VGE = 15 V, IC= 1.5 A VGE= 15 V, IC= 1.5 A, Tj=125°C VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA ICES Collector cut-off current (VGE = 0) IGES gfs Table 5. Symbol 4/16 IC = 1 mA Min. Typ. Max. 600 Unit V 1.4 2.45 1.85 2.95 V 5.75 V VCE = 600 V VCE = 600 V, Tj= 125 °C 250 1 µA mA Gate-emitter leakage current (VCE = 0) VGE = ±20 V ±100 nA Forward transconductance VCE = 15 V, IC= 1.5 A 3.75 1.5 S Dynamic electrical characteristics Parameter Test conditions Cies Coes Cres Input capacitance Output capacitance Reverse transfer capacitance VCE = 25 V, f = 1 MHz, VGE = 0 - 152 14 3 - pF pF pF Qg Qge Qgc Total gate charge Gate-emitter charge Gate-collector charge VCE = 480 V, IC = 1.5 A, VGE = 15 V (see Figure 18) - 12 2 6 - nC nC nC Doc ID 17690 Rev 3 Min. Typ. Max. Unit STGD3HF60HD Electrical characteristics Table 6. Symbol Parameter Test conditions Min. Typ. Max. Unit td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope VCC = 400 V, IC = 1.5 A RG= 100 Ω, VGE = 15 V (see Figure 19) - 11 4 285 - ns ns A/µs td(on) tr (di/dt)on Turn-on delay time Current rise time Turn-on current slope VCC = 400 V, IC = 1.5 A RG = 100 Ω, VGE = 15 V, Tj =125 °C (see Figure 19) - 10 5 265 - ns ns A/µs tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time VCC = 400 V, IC = 1.5 A, RGE = 100 Ω, VGE = 15 V (see Figure 19) - 26 60 50 - ns ns ns tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time VCC = 400 V, IC = 1.5 A, RGE = 100 Ω, VGE =15 V, Tj = 125 °C (see Figure 19) - 64 69 71 - ns ns ns Min. Typ. Max. Unit Table 7. Symbol 1. Switching on/off (inductive load) Switching energy (inductive load) Parameter Test conditions Eon (1) Eoff(2) Ets Turn-on switching losses Turn-off switching losses Total switching losses VCC = 400 V, IC = 1.5 A RG = 100 Ω, VGE=15 V (see Figure 19) - 19 12 31 - µJ µJ µJ Eon (1) Eoff(2) Ets Turn-on switching losses Turn-off switching losses Total switching losses VCC = 400 V, IC = 1.5 A RG = 100 Ω, VGE = 15 V, Tj = 125 °C (see Figure 19) - 38 35 73 - µJ µJ µJ Eon is the turn-on losses when a typical diode is used in the test circuit in (see Figure 20). If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs and diode are at the same temperature (25°C and 125°C). 2. Turn-off losses include also the tail of the collector current. Table 8. Symbol Collector-emitter diode Parameter Test conditions Min. Typ. Max. 1.8 Unit VF Forward on-voltage IF = 1.5 A IF = 1.5 A, Tj=125 °C - 1.4 1.15 trr Qrr Irrm Reverse recovery time Reverse recovery charge Reverse recovery current IF = 1.5 A, VR = 40 V, di/dt = 100 A/μs (see Figure 20) - 85 124 3 ns nC A trr Qrr Irrm Reverse recovery time Reverse recovery charge Reverse recovery current IF = 1.5 A,VR = 40 V, Tj =125 °C, di/dt = 100 A/μs (see Figure 20) - 114 194 3.5 ns nC A Doc ID 17690 Rev 3 V 5/16 Electrical characteristics STGD3HF60HD 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Output characteristic details AM08674v1 IC(A) AM08675v1 IC(A) VGE=15V 16 13V 4.0 14 12V 3.5 12 11V 3.0 10 10V 8 8V 9V 2.5 7V 2.0 9V 6 1.5 4 8V 1.0 2 7V 0.5 0 0 Figure 4. VGE=15V 2 4 6V VCE(V) 8 6 Transfer characteristics Figure 5. AM08676v1 IC (A) 0 0 VCE=10V 16 6V 1 2 VCE(V) Collector-emitter on voltage vs collector current AM08677v1 VCE(sat) (V) 3.5 4 3 TJ=-50°C VGE=15V 14 3.0 12 10 TJ=25°C 2.5 8 2.0 6 TJ=125°C 4 1.5 2 0 0 Figure 6. 2 4 8 6 10 12 VGE(V) Collector-emitter on voltage vs temperature AM08678v1 VCE(sat) (V) 1.0 0.5 Figure 7. 1.5 1.0 2.0 2.5 3.0 IC(A) Breakdown voltage vs temperature AM08679v1 VCES (V) IC=1mA VGE=15V 3.5 720 3.0 2.5 IC=3A 2.0 IC=1.5A 680 640 1.5 1.0 -50 6/16 IC=0.75A 0 50 100 TJ(°C) 600 -50 Doc ID 17690 Rev 3 0 50 100 TJ(°C) STGD3HF60HD Figure 8. Electrical characteristics Gate threshold voltage vs temperature Figure 9. AM08830v1 VGE(th) (V) VGE=VCE IC =250µA Gate charge vs gate-emitter voltage AM08831v1 VGE (V) VCC=480V IC=1.5A 5.0 15 4.5 10 4.0 5 3.5 -50 50 0 0 TJ(°C) 100 Figure 10. Capacitance variations 8 4 0 12 Figure 11. Switching losses vs collector current AM08832v1 C (pF) Qg(nC) AM08889v1 E (µJ) f=1MHz VGE=0 300 70 250 VCE=400V, RG=100Ω VGE=15V, TJ=125°C 60 200 50 Cies 150 40 100 30 50 20 Coes 0 0 Cres 10 20 30 40 Eon Eoff 10 0.5 VCE(V) 1.0 1.5 2.0 2.5 IC(A) Figure 12. Switching losses vs gate resistence Figure 13. Switching losses vs temperature AM08890v1 E (µJ) AM08891v1 E (µJ) VCE=400V, IC=1.5A VGE=15V, TJ=125°C 60 35 55 30 50 25 Eon 45 Eon 20 VCE=400V, IC=1.5A VGE=15V, RG=100Ω 40 15 Eoff 35 30 0 200 400 600 800 RG(Ω) Doc ID 17690 Rev 3 10 25 Eoff 50 75 100 TJ(°C) 7/16 Electrical characteristics STGD3HF60HD Figure 14. Turn-off SOA Figure 15. Diode forward on voltage AM08836v1 IC (A) TJ=25°C 10 TJ=150°C 1 RG=100Ω VGE=15V 0 1 10 100 VCE(V) 24 22 20 18 16 14 12 10 8 6 4 2 0 0 Figure 16. Thermal impedance 8/16 AM04940v1 IFM(A) Doc ID 17690 Rev 3 TC=125°C TC=25°C TC=-50°C 0.5 1 1.5 2 2.5 3 3.5 VFM (V) STGD3HF60HD 3 Test circuits Test circuits Figure 17. Test circuit for inductive load switching Figure 18. Gate charge test circuit AM01504v1 Figure 19. Switching waveform AM01505v1 Figure 20. Diode recovery time waveform VG IF trr 90% VCE Qrr di/dt 90% 10% ta tb 10% Tr(Voff) t Tcross 90% IRRM IRRM IC 10% Td(off) Td(on) Tr(Ion) Ton Tf Toff VF dv/dt AM01506v1 Doc ID 17690 Rev 3 AM01507v1 9/16 Package mechanical data 4 STGD3HF60HD Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 10/16 Doc ID 17690 Rev 3 STGD3HF60HD Package mechanical data Table 9. DPAK (TO-252) mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 0.80 L4 0.60 1 R V2 0.20 0° 8° Doc ID 17690 Rev 3 11/16 Package mechanical data STGD3HF60HD Figure 21. DPAK (TO-252) drawing 0068772_G 12/16 Doc ID 17690 Rev 3 STGD3HF60HD 5 Packaging mechanical data Packaging mechanical data Table 10. DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 Figure 22. DPAK footprint(a) 6.7 1.8 3 1.6 2.3 6.7 2.3 1.6 AM08850v1 a. All dimension are in millimeters Doc ID 17690 Rev 3 13/16 Packaging mechanical data STGD3HF60HD Figure 23. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 W K0 B0 For machine ref. only including draft and radii concentric around B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 Figure 24. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 14/16 Doc ID 17690 Rev 3 STGD3HF60HD 6 Revision history Revision history Table 11. Document revision history Date Revision Changes 29-Jun-2010 1 First release. 09-Sep-2010 2 Some values changed in Table 2. 22-Dec-2010 3 Document status promoted from preliminary data to datasheet. Doc ID 17690 Rev 3 15/16 STGD3HF60HD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 Doc ID 17690 Rev 3