STP14NK60Z - STP14NK60ZFP STB14NK60Z/-1 - STW14NK60Z N-CHANNEL 600V - 0.45Ω - 13.5A TO-220/FP-D²/I²PAK-TO-247 Zener-Protected SuperMESH™ MOSFET Table 1: General Features Figure 1: Package TYPE VDSS RDS(on) ID STP14NK60Z STP14NK60ZFP STB14NK60Z STB14NK60Z-1 STW14NK60Z 600 V 600 V 600 V 600 V 600 V < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 Ω Ω Ω Ω Ω 13.5 13.5 13.5 13.5 13.5 ■ ■ ■ ■ ■ ■ Pw A A A A A 160 W 40 W 160 W 160 W 160 W TYPICAL RDS(on) = 0.45 Ω EXTREMELY HIGH dv/dt CAPABILITY 100% AVALANCHE TESTED GATE CHARGE MINIMIZED VERY LOW INTRINSIC CAPACITANCES VERY GOOD MANUFACTURING REPEATIBILITY DESCRIPTION The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmesh™ products. 3 1 3 2 1 2 TO-220P TO-220 3 2 1 TO-247 3 12 3 1 I²PAK D²PAK Figure 2: Internal Schematic Diagram APPLICATIONS ■ HIGH CURRENT, HIGH SPEED SWITCHING ■ IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTORS AND PFC ■ LIGHTING Table 2: Order Codes Part Number Marking Package Packaging STP14NK60Z P14NK60Z TO-220 TUBE STP14NK60ZFP P14NK60ZFP TO-220FP TUBE STB14NK60ZT4 B14NK60Z D²PAK TAPE & REEL STB14NK60Z-1 B14NK60Z I²PAK TUBE STW14NK60Z W14NK60Z TO-247 TUBE Rev. 4 September 2005 1/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Table 3: Absolute Maximum ratings Symbol Parameter Value TO-220/D²PAK/I²PAK TO-247 VDS VDGR VGS Unit TO-220FP Drain-source Voltage (VGS = 0) 600 V Drain-gate Voltage (RGS = 20 kΩ) 600 V Gate-source Voltage ± 30 V ID Drain Current (continuous) at TC = 25°C 13.5 13.5 (*) A ID Drain Current (continuous) at TC = 100°C 8.5 8.5 (*) A Drain Current (pulsed) 54 54 (*) A Total Dissipation at TC = 25°C 160 40 W Derating Factor 1.28 0.32 W/°C IDM ( ) PTOT VESD(G-S) Gate source ESD (HBM-C= 100pF, R= 1.5kΩ) dv/dt (1) Peak Diode Recovery voltage slope VISO Insulation Winthstand Voltage (DC) Tj Tstg Operating Junction Temperature Storage Temperature 4000 V 4.5 V/ns -- 2500 -55 to 150 V °C ( ) Pulse width limited by safe operating area (1) ISD ≤ 13.5A, di/dt ≤ 200 A/µs, VDD ≤ V(BR)DSS, T j ≤ T JMAX. (*) Limited only by maximum temperature allowed Table 4: Thermal Data TO-220/D²PAK/I²PAK TO-247 TO-220FP Unit Rthj-case Thermal Resistance Junction-case Max 0.78 3.1 °C/W Rthj-amb 62.5 50 °C/W Tl Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 300 °C Table 5: Avalanche Characteristics Symbol Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Parameter 12 A EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 300 mJ Table 6: Gate-Source Zener Diode Symbol Parameter Test Conditions Min. BVGSO Gate source Breakdown Voltage Igs= ± 1 mA (Open Drain) 30 Typ. Max. Unit V PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. 2/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) Table 7: On/Off Symbol V(BR)DSS Parameter Test Conditions Min. Typ. Max. 600 Unit Drain-source Breakdown Voltage ID = 1mA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125 °C 1 50 µA µA IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 30V ±10 µA VGS(th) Gate Threshold Voltage VDS = VGS, ID = 100 µA 3.75 4.5 V RDS(on) Static Drain-source On Resistance VGS = 10V, ID = 6 A 0.45 0.5 Ω Typ. Max. Unit 3 V Table 8: Dynamic Symbol gfs (1) Ciss Coss Crss Parameter Test Conditions Min. Forward Transconductance VDS = 15 V, ID= 6 A 11 S Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25V, f = 1 MHz, VGS = 0 2220 240 57 pF pF pF Coss eq. (3) Equivalent Output Capacitance VGS = 0V, VDS = 0V to 480V 122 pF td(on) tr td(off) tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time VDD = 300 V, ID = 6 A, RG= 4.7 Ω, VGS = 10 V (Resistive Load see, Figure 21) 26 18 62 13 ns ns ns ns Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 480V, ID = 12 A, VGS = 10V (see, Figure 24) 75 13.2 38.6 nC nC nC Table 9: Source Drain Diode Symbol Parameter Test Conditions Min. Typ. Max. Unit 12 48 A A ISD ISDM (2) Source-drain Current Source-drain Current (pulsed) VSD (1) Forward On Voltage ISD = 12 A, VGS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 12 A, di/dt = 100 A/µs VDD = 50 V, Tj = 25°C (see test circuit, Figure 22) 490 4.7 19.3 ns µC A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 12 A, di/dt = 100 A/µs VDD = 50 V, Tj = 150°C (see test circuit, Figure 22) 664 6.8 20.5 ns µC A trr Qrr IRRM trr Qrr IRRM 1.6 V (1) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (2) Pulse width limited by safe operating area. (3) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 3/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Figure 3: .Safe Operating Area For TO-220/ D²PAK/I²PAK Figure 6: Thermal Impedance For TO-220/ D²PAK/I²PAK Figure 4: Safe Operating Area For TO-220FP Figure 7: Thermal Impedance For TO-220FP Figure 5: Safe Operating Area For TO-247 Figure 8: Thermal Impedance For TO-247 4/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Figure 9: Output Characteristics Figure 12: Transfer Characteristics Figure 10: Transconductance Figure 13: Static Drain-source On Resistance Figure 11: Gate Charge vs Gate-source Voltage Figure 14: Capacitance Variations 5/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Figure 15: Normalized Gate Thereshold Voltage vs Temperature Figure 18: Normalized On Resistance vs Temperature Figure 16: Source-Drain Forward Characteristics Figure 19: Normalized BVDSS vs Temperature Figure 17: Maximum Avalanche Energy vs Temperature 6/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Figure 20: Unclamped Inductive Load Test Circuit Figure 23: Unclamped Inductive Wafeform Figure 21: Switching Times Test Circuit For Resistive Load Figure 24: Gate Charge Test Circuit Figure 22: Test Circuit For Inductive Load Switching and Diode Recovery Times 7/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 E 8 10 E1 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0º 0.015 4º 3 V2 0.4 9/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z TO-247 MECHANICAL DATA DIM. mm. MIN. MAX. MIN. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 TYP. MAX. b2 3.0 3.40 0.118 0.134 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 0.620 e 5.45 0.214 L 14.20 14.80 0.560 0.582 L1 3.70 4.30 0.14 0.17 L2 18.50 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S 10/17 TYP inch 5.50 0.216 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 MAX. MIN. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 11/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 0.106 e 2.40 2.70 0.094 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/17 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. 4.6 0.173 TYP. 0.181 MAX. B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 L2 0.409 16 0.630 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 F F1 L7 L2 L5 1 2 3 L4 13/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. 14/17 TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 15/17 STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Table 10: Revision History Date Revision 26-Aug-2004 06-Sep-2005 4 5 16/17 Description of Changes New stylesheet Inserted Ecopack indication STP14NK60Z - STP14NK60ZFP - STB14NK60Z - STB14NK60Z-1 - STW14NK60Z Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17