Z-Power LED X10490 Technical Data Sheet RoHS Specification SSC-SZ5P (Rev.02_110824) SSC Drawn Approval Customer Approval SSCSSC-SZ5P August 2011 www.seoulsemicon.com 1 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet [ Contents ] 1. Description 2. Characteristics of Z5P 3. Characteristic diagrams 4. Outline dimensions 5. Recommended solder pad 6. Labeling 7. Reel Packing 8. Soldering profile 9. Precaution for Use SSCSSC-SZ5P August 2011 www.seoulsemicon.com 2 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet SZ5P Description The Z-Power series is designed for high current operation and high flux output applications. It incorporates state of the art SMD SZ5P Features • Super high Flux output and high Luminance • Designed for high current operation • SMT solderable • Lead Free product • RoHS compliant design and low thermal resistant material. The Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive, large backlights and high performance torches. Applications • Automotive interior / exterior lighting • Automotive signal lighting • Automotive forward lighting • General Torch • Architectural lighting • Projector light source • Traffic signals • Task lighting • Decorative / Pathway lighting • Remote / Solar powered lighting SSCSSC-SZ5P August 2011 www.seoulsemicon.com 3 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of SZ5-P0-W0-00 Pure White 1-1 Electro-Optical characteristics at 350mA (Ta=25 ℃) Value Parameter Luminous Flux Symbol Correlated Color Temperature Typ Max - 120 - ФV (Tj=100℃) - 115 - CCT - 6000 - K Ra - 70 - - VF - 3.3 - V ФV [2] [1] [3] CRI Forward Voltage [4] Thermal resistance (J to S) View Angle Unit Min lm RθJ-S 6.2 K/W Θ½ 120 deg. 2 1-2 Absolute Maximum Ratings Parameter Symbol Forward Current IF Value Unit 1000 mA 1000(1/10duty@1kHz) Reverse Voltage VR 5 V Power Dissipation Pd 4 W Junction Temperature Tj 145(@ IF ≤ 1000mA) ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ± 8,000V HBM - ESD Sensitivity [5] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrating sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color coordinate : 0.005, CCT ±5% tolerance. [4] Tolerance is ±0.06V on forward voltage measurements [5] A zener diode is included to protect the product from ESD. Ф SSCSSC-SZ5P August 2011 www.seoulsemicon.com 4 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of SZ5-P0-WN-00 Neutral White 1-1 Electro-Optical characteristics at 350mA (Ta=25 ℃) Value Parameter Luminous Flux Symbol Correlated Color Temperature Typ Max - 120 - ФV (Tj=100℃) - 113 - CCT - 4200 - K Ra - 65 - - VF - 3.3 - V ФV [2] [1] [3] CRI Forward Voltage [4] Thermal resistance (J to S) View Angle Unit Min lm RθJ-S 6.2 K/W Θ½ 120 deg. 2 1-2 Absolute Maximum Ratings Parameter Symbol Forward Current IF Value Unit 1000 mA 1000(1/10duty@1kHz) Reverse Voltage VR 5 V Power Dissipation Pd 4 W Junction Temperature Tj 145(@ IF ≤ 1000mA) ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ± 8,000V HBM - ESD Sensitivity [5] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrating sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color coordinate : 0.005, CCT ±5% tolerance. [4] Tolerance is ±0.06V on forward voltage measurements [5] A zener diode is included to protect the product from ESD. Ф SSCSSC-SZ5P August 2011 www.seoulsemicon.com 5 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of SZ5-P0-WN-C8 Neutral White 1-1 Electro-Optical characteristics at 350mA (Ta=25 ℃) Value Parameter Luminous Flux Symbol Correlated Color Temperature Typ Max - 100 - ФV (Tj=100℃) - 98 - CCT - 4200 - K Ra 80 - - - VF - 3.3 - V ФV [2] [1] [3] CRI Forward Voltage [4] Thermal resistance (J to S) View Angle Unit Min lm RθJ-S 6.2 K/W Θ½ 120 deg. 2 1-2 Absolute Maximum Ratings Parameter Symbol Forward Current IF Value Unit 1000 mA 1000(1/10duty@1kHz) Reverse Voltage VR 5 V Power Dissipation Pd 4 W Junction Temperature Tj 145(@ IF ≤ 1000mA) ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ± 8,000V HBM - ESD Sensitivity [5] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrating sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color coordinate : 0.005, CCT ±5% tolerance. [4] Tolerance is ±0.06V on forward voltage measurements [5] A zener diode is included to protect the product from ESD. Ф SSCSSC-SZ5P August 2011 www.seoulsemicon.com 6 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Characteristics of SZ5-P0-WW-C8 Warm White 1-1 Electro-Optical characteristics at 350mA (Ta=25 ℃) Value Parameter Luminous Flux Symbol Correlated Color Temperature Typ Max - 85 - ФV (Tj=100℃) - 83 - CCT - 3000 - K Ra 80 - - - VF - 3.3 - V ФV [2] [1] [3] CRI Forward Voltage [4] Thermal resistance (J to S) View Angle Unit Min lm RθJ-S 6.2 K/W Θ½ 120 deg. 2 1-2 Absolute Maximum Ratings Parameter Symbol Forward Current IF Value Unit 1000 mA 1000(1/10duty@1kHz) Reverse Voltage VR 5 V Power Dissipation Pd 4 W Junction Temperature Tj 145(@ IF ≤ 1000mA) ºC Operating Temperature Topr -40 ~ +85 ºC Storage Temperature Tstg -40 ~ +100 ºC - ± 8,000V HBM - ESD Sensitivity [5] *Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrating sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color coordinate : 0.005, CCT ±5% tolerance. [4] Tolerance is ±0.06V on forward voltage measurements [5] A zener diode is included to protect the product from ESD. Ф SSCSSC-SZ5P August 2011 www.seoulsemicon.com 7 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics Forward Voltage vs. Forward Current, Ta=25 ℃ Forward Current[A] 1.0 0.8 0.6 0.4 0.2 0.0 -6 -4 -2 0 2 4 Forward Voltage[V] Forward Current vs. Normalized Relative Luminous Flux, Ta=25 ℃ Relative Luminous Flux[%] 250 200 150 100 50 0 0.0 0.2 0.4 0.6 Forward Current[A] 0.8 1.0 SSCSSC-SZ5P August 2011 www.seoulsemicon.com 8 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics ℃ CCT vs. Forward Current, Ta=25 6000 5500 CCT[K] 5000 4500 4000 3500 Pure Neutral Warm 3000 0.0 0.2 0.4 0.6 0.8 1.0 Forward Current[A] SSCSSC-SZ5P August 2011 www.seoulsemicon.com 9 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Ambient Temperature vs. Allowable Forward Current Pure White, Neutral White, Warm White (Tjmax = 145 ℃, @1A) Maximum Current[mA] 1000 800 o Rj-a=15 C/W 600 o Rj-a=20 C/W o Rj-a=30 C/W 400 200 0 0 20 40 60 80 100 120 140 o Ambient Temperature( C) Radiation pattern SSCSSC-SZ5P August 2011 www.seoulsemicon.com 10 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Current Color Spectrum, Ta=25℃ ℃ Pure Neutral Warm Relative Spectral Power Spectrum 1.0 0.8 0.6 0.4 0.2 0.0 300 400 500 600 700 800 Wavelength[nm] SSCSSC-SZ5P August 2011 www.seoulsemicon.com 11 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics Relative Light Output vs. Junction Temperature at IF=350mA Relative Luminous Output[%] 100 90 80 20 Pure Neutral Warm 10 0 20 40 60 80 100 120 140 160 o Junction Temperature[ C] SSCSSC-SZ5P August 2011 www.seoulsemicon.com 12 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics VF vs. Junction Temperature at IF=350mA Forward Voltage Shift[V] 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 20 40 60 80 100 120 140 o Junction Temperature[ C] SSCSSC-SZ5P August 2011 www.seoulsemicon.com 13 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics CCT vs. Junction Temperature at IF=350mA 7000 6500 6000 CCT[K] 5500 5000 4500 4000 Pure Neutral Warm 3500 3000 20 40 60 80 100 120 140 160 o Junction Temperature[ C] SSCSSC-SZ5P August 2011 www.seoulsemicon.com 14 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Outline dimensions Top View ⓐ ⓑ Side View Bottom View ⓐ ⓑ Circuit Notes : [1] All dimensions are in millimeters. [2] Scale : none [3] Undefined tolerance is ± 0.1mm SSCSSC-SZ5P August 2011 www.seoulsemicon.com 15 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Recommended solder pad Notes : [1] All dimensions are in millimeters. [2] Scale : none [3] This drawing without tolerances are for reference only SSCSSC-SZ5P August 2011 www.seoulsemicon.com 16 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Label # 1 # 2# 3 # 4 : X1X-2XP SZ5SZ5 3 – X4X5 –X6X7 –X8 X9 Full code form : X1X2X3- X4X5- X6X7- X8X9 - X1X2X3 : Part Number - X4 : Series Code - X5 : Revision No - X6X7 : Color specification - X8X9 : CRI group Rank # 1 # 2# 3 # 4 - #1 : Luminous Flux : LF [lm] - #2 #3 : Color Coordinates : x, y - #4 : Forward Voltage : VF [V] SSCSSC-SZ5P August 2011 www.seoulsemicon.com 17 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Emitter Carrier & Reel Packaging CATHODE MARK 22 13 SSCSSC-SZ5P August 2011 www.seoulsemicon.com 18 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Reflow Soldering Conditions / Profile [°C] Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Ts : Surface temp of PCB (min) 260 240 220 200 Pre-heating Rising 5 °C/sec Cooling -5 °C/sec ~ 180 150 0 Time [ Hr] * Caution 1. Reflow soldering should not be done more than one time. 2. Repairs should not be done after the LEDs have been soldered. When repair is unavoidable, suitable tools must be used. 3. Die slug is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones. SSCSSC-SZ5P August 2011 www.seoulsemicon.com 19 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Precaution for use • Storage To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box with a desiccant . The recommended storage temperature range is 5C to 30C and a maximum humidity of 50%. • Use Precaution after Opening the Packaging Use proper SMD techniques when the LED is to be soldered dipped as separation of the lens may affect the light output efficiency. Pay attention to the following: a. Soldering should be done immediately after opening the package (within 24Hrs). b. Required conditions after opening the package - Sealing - Temperature : 5 ~ 40 ℃ Humidity : less than 30% c. If the package has been opened more than 4 week or the color of the desiccant changes, ±℃ components should be dried for 10-12hr at 60 5 • Do not apply mechanical force or excess vibration during the cooling process to normal temperature after soldering. • Do not rapidly cool device after soldering. • Components should not be mounted on warped (non coplanar) portion of PCB. • Radioactive exposure is not considered for the products listed here in. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed of. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA (Isopropyl Alcohol) should be used. • When the LEDs are in operation the maximum current should be decided after measuring the package temperature. • LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. • The appearance and specifications of the product may be modified for improvement without notice. • Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. • The slug is isolated from anode electrically. Therefore, we recommend that you don’t isolate the heat sink. • Attaching LEDs, do not use adhesives that outgas organic vapor. SSCSSC-SZ5P August 2011 www.seoulsemicon.com 20 서식번호 : SSC- QP- 7- 07- 12 (Rev.00) Z-Power LED X10490 Technical Data Sheet Handling of Silicone resin LEDs The Z-Power LED is encapsulated with a silicone resin for the highest flux efficiency. Notes for handling: • Avoid touching silicone resin parts especially with sharp tools such as Pincetter (Tweezers) • Avoid leaving fingerprints on silicone resin parts. • Silicone resin will attract dust so use covered containers for storage. • When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that excessive mechanical pressure on the surface of the resin must be prevented. • It is not recommend to cover the silicone resin of the LEDs with other resin (epoxy, urethane, etc) SSCSSC-SZ5P August 2011 www.seoulsemicon.com 21 서식번호 : SSC- QP- 7- 07- 12 (Rev.00)