TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1&5 T322 & T323 (CX01 & CX05) SERIES The KEMET T322 AND T323 (CX01 & CX05) Series offers a complete line of extended range molded solid tantalum capacitors designed specifically for high speed automatic insertion applications. These capacitors offer an extremely high capacitance-to-volume ratio while still maintaining excellent performance characteristics. 2, 4, 6, 10, 15, 20, 25, 35, and 50 volts. Operating temperature range -55°C to +85°C at full rated voltage and with 2⁄3 85°C rated voltage at 125°C. Supplied in six axial lead tubular case sizes, these capacitors are ideally suited for use in printed wiring boards and all applications requiring a high degree of packaging density and can be supplied in bulk packaging or lead-taped on reels. T323 Series capacitors are qualified under MIL-PRF-49137/1 & 5 as Military Style CX01 & CX05. The T322/T323 Series dimensions and tight lead wire-to-body concentricity permit installation by the same automatic insertion equipment used for diodes and resistors. Available in working voltages of The gold color epoxy utilized permits laser marking with outstanding permanency and legibility. Typical applications include decoupling, blocking, bypassing and filtering in commercial computers, data processing, communications, and other electronic equipment. The low ESR/impedance at high frequencies offered by this capacitor is especially suitable for decoupling required by high speed computers. PERFORMANCE CHARACTERISTICS • CAPACITANCE/VOLTAGE RANGE: 0.1-330µF, 2-50 Volts. • CAPACITANCE TOLERANCE: Available in standard EIA nominal values with ±20%, ±10% and ±5% tolerance. • DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for additional description. • DC LEAKAGE CURRENT: Each corresponding part number table lists maximum leakage current for each capacitor on pages 44 through 48. See Application Notes Section, page 76 for additional description. • RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, page 76 & 77 for description. • AC RIPPLE VOLTAGE: Permissible AC ripple voltage is related to equivalent series resistance (ESR) and power dissipation capability. Maximum power dissipation for each case size is listed in Table below. For additional description see page 79. Case Size A B C D E F Power Dissipation (max.) @ 25°C (watts) .060 .070 .080 .090 .100 .110 T322 ESR (OHMS) at 100 kHz @ +25°C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of these values for any particular T322 Series product.) Cap. µF 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 6 Volt 13.0 13.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 3.7 3.7 3.0 3.0 2.0 2.0 1.8 1.8 1.6 1.6 0.9 0.9 0.9 0.9 0.7 10 Volt 13.0 13.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 3.7 3.7 2.7 2.7 2.1 2.1 1.7 1.7 1.3 1.3 1.0 1.0 0.8 0.8 0.6 15 Volt 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 4.0 4.0 3.2 3.2 2.5 2.5 2.0 2.0 1.6 1.6 1.3 1.3 1.0 1.0 0.8 0.8 0.6 20 Volt 10.0 10.0 9.0 9.0 7.0 7.0 5.5 5.5 4.5 4.5 3.6 3.6 2.9 2.9 2.3 2.3 1.8 1.8 1.4 1.4 1.2 1.2 0.9 0.9 0.6 25 Volt 16.0 14.0 12.0 12.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 4.0 4.0 3.1 3.1 2.5 2.5 2.0 2.0 1.5 1.5 1.2 1.2 1.0 1.0 0.8 35 Volt 50 Volt 26.0 26.0 21.0 21.0 17.0 17.0 15.0 15.0 13.0 13.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 4.0 4.0 3.0 3.0 2.5 2.5 2.0 2.0 1.6 1.6 1.3 1.3 1.0 1.0 0.8 26.0 26.0 21.0 21.0 17.0 17.0 15.0 15.0 13.0 13.0 10.0 10.0 8.0 8.0 5.0 5.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.6 1.6 1.2 1.2 1.0 1.0 Maximum Power Dissipation Capability @ 25°C • IMPEDANCE and ESR: See Application Notes Section, pages 77 & 78 for description. Reference ESR values are shown in adjoining column, this page. • ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. 42 For additional Environmental Test Information see pages 80, 81 and 82. • LEAD MATERIAL: Solder coated steel core with copper ply per MIL-STD-1276. • LEAD TAPE and REEL: Reeling per specification RS-296. See pages 71 and 73 for additional information. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES Effective September 30, 2005, the KEMET T322 Series is RoHS compliant. CAPACITOR OUTLINE DRAWINGS L 1.50±.250 (38.10±6.35) D 1.50±.250 (38.10±6.35) + W B DIMENSIONS — INCHES & (MILLIMETERS) CASE SIZE A B C D E F D (MAX) .095 (2.41) .110 (2.79) .180 (4.57) .180 (4.57) .280 (7.11) .300 (7.62) L (MAX) .260 (6.6) .290 (7.37) .345 (8.76) .420 (10.67) .530 (13.46) .710 (18.03) W .020 (.51) .020 (.51) .020 (.51) .020 (.51) .025 (.64) .025 (.64) T322 & T323 ORDERING INFORMATION T 32X A 474 M 035 A S — C* TANTALUM SPECIFICATION SERIES (when necessary — Reeling Per EIA Specification RS-296 Sub-Miniature, Molded, Polar, Solid Tantalum, Insert appropriate number to replace letter “X” — 322 or 323 (CX01, CX05). LEAD MATERIAL S — Standard T – 100% Tin CASE SIZE FAILURE RATE LEVEL A, B, C, D, E, or F A — Not Applicable CAPACITANCE IN PICOFARADS VOLTAGE RATING First two digits are significant figures. Third digit is number of zeros following. CAPACITANCE TOLERANCE *M — ±20% *K — ±10% *J — ±5% *Part Number Example: T322A474M035AS (14 digits – no spaces) * M & K only tolerances available for T323 Series. MIL-PRF-49137/5 MILITARY ORDERING INFORMATION CX 05 D 225 K CAPACITANCE TOLERANCE Capacitor, Fixed, Solid Tantalum, Molded, Non-hermetically Sealed Symbol STYLE K Capacitance Tolerance Percent (±) 10 01, 05 (T323) A, B, C, and D M 20 VOLTAGE Symbol Rated (85°C) Volts, DC Surge (85°C) Volts, DC D F H J K M N 6 10 15 20 25 35 50 8.0 13.0 20.0 26.0 32.0 46.0 65.0 CAPACITANCE TOLERANCE The nominal capacitance value, expressed in picofarads (pF), is identified by a three-digit number; the first two digits represent significant figures and the last digit specifies the number of zeros to follow. CAPACITOR MARKING 105M +25 K 0324 Capacitance Value (pF), Capacitance Tolerance Polarity, Voltage, KEMET Date Code (Year, Week) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 43 T322/T323 Tantalum Molded / Axial TYPE TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES RATINGS & PART NUMBER REFERENCE KEMET T322 SERIES CAPACITANCE µF CASE SIZE CAPACITANCE TOLERANCE ±% 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 A A A B B B B B B C C C C 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 A A A B B B B B B C C C C D D 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 3.3 3.9 4.7 4.7 4.7 5.6 5.6 5.6 6.8 6.8 6.8 8.2 8.2 8.2 10.0 10.0 10.0 12.0 12.0 12.0 15.0 15.0 15.0 18.0 22.0 27.0 33.0 33.0 33.0 39.0 47.0 47.0 47.0 56.0 68.0 A A A A A B B B B B B B B B B B B B B B B B B C C C C C C D D D D D D 5,10,20 5,10,20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5,10,20 KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 MILITARY PART NUMBER KEMET PART NUMBER 2 VOLT RATING AT 85°C — 1.3 VOLT RATING AT 125°C T322A685(1)002AS T322A825(1)002AS T322A106(1)002AS T322B126(1)002AS T322B156(1)002AS T322B186(1)002AS T322B226(1)002AS T322B276(1)002AS T322B336(1)002AS T322C396(1)002AS T322C476(1)002AS T322C566(1)002AS T322C686(1)002AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.8 0.9 1.1 10 10 10 10 10 10 10 10 10 10 10 10 10 4 VOLT RATING AT 85°C — 2.7 VOLT RATING AT 125°C T322A475(1)004AS T322A565(1)004AS T322A685(1)004AS T322B825(1)004AS T322B106(1)004AS T322B126(1)004AS T322B156(1)004AS T322B186(1)004AS T322B226(1)004AS T322C276(1)004AS T322C336(1)004AS T322C396(1)004AS T322C476(1)004AS T322D566(1)004AS T322D686(1)004AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.7 0.9 1.1 1.2 1.5 1.8 2.2 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C T322A335(1)006AS T322A395(1)006AS T322A475J006AS T322A475K006AS T322A475M006AS T322B565J006AS T322B565K006AS T322B565M006AS T322B685J006AS T322B685K006AS T322B685M006AS T322B825J006AS T322B825K006AS T322B825M006AS T322B106J006AS T322B106K006AS T322B106M006AS T322B126J006AS T322B126K006AS T322B126M006AS T322B156J006AS T322B156K006AS T322B156M006AS T322C186(1)006AS T322C226(1)006AS T322C276(1)006AS T322C336J006AS T322C336K006AS T322C336M006AS T322D396(1)006AS T322D476J006AS T322D476K006AS T322D476M006AS T322D566(1)006AS T322D686(1)006AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.7 0.7 0.9 1.1 1.3 1.5 1.5 1.5 1.9 2.3 2.3 2.3 2.7 3.3 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 CX05D475K CX05D475M T323A475K006AS T323A475M006AS CX01D565K CX01D565M T323B565K 006AS T323B565M006AS CX01D685K CX01D685M T323B685K006AS T323B685M006AS CX01D825K CX01D825M T323B825K 006AS T323B825M006AS CX01D106K CX01D106M T323B106K006AS T323B106M006AS CX01D126K CX01D126M T323B126K 006AS T323B126M006AS CX05D156K CX05D156M T323B156K006AS T323B156M006AS CX05D336K CX05D336M T323C336K006AS T323C336M006AS CX05D476K CX05D476M T323D476K006AS T323D476M006AS (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Face lines indicate preferred part types and values. 44 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES RATINGS & PART NUMBER REFERENCE KEMET T322 SERIES CAPACITANCE µF CASE SIZE CAPACITANCE TOLERANCE ±% 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 E E E E E E F F 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 2.2 2.7 3.3 3.3 3.3 3.9 4.7 5.6 6.8 8.2 10.0 10.0 10.0 12.0 15.0 18.0 22.0 22.0 22.0 27.0 27.0 27.0 33.0 33.0 33.0 39.0 39.0 39.0 47.0 47.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 A A A A A B B B B B B B B C C C C C C D D D D D D D D D D D D E E E E E E F F 5,10,20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 1.5 1.8 2.2 2.2 2.2 2.7 3.3 3.9 4.7 5.6 6.8 6.8 6.8 8.2 10.0 12.0 15.0 15.0 15.0 A A A A A B B B B B B B B C C C C C C 5,10,20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5 10 20 KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 MILITARY PART NUMBER KEMET PART NUMBER 6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C (Cont’d) T322E826(1)006AS T322E107(1)006AS T322E127(1)006AS T322E157(1)006AS T322E187(1)006AS T322E227(1)006AS T322F277(1)006AS T322F337(1)006AS 3.9 4.8 5.0 5.0 8.6 10.0 10.0 10.0 8 8 8 8 8 8 8 8 T322A225(1)010AS T322A275(1)010AS T322A335J010AS T322A335K010AS T322A335M010AS T322B395(1)010AS T322B475(1)010AS T322B565(1)010AS T322B685(1)010AS T322B825(1)010AS T322B106J010AS T322B106K010AS T322B106M010AS T322C126(1)010AS T322C156(1)010AS T322C186(1)010AS T322C226J010AS T322C226K010AS T322C226M010AS T322D276J010AS T322D276K010AS T322D276M010AS T322D336J010AS T322D336K010AS T322D336M010AS T322D396J010AS T322D396K010AS T322D396M010AS T322D476J010AS T322D476K010AS T322D476M010AS T322E566(1)010AS T322E686(1)010AS T322E826(1)010AS T322E107(1)010AS T322E127(1)010AS T322E157(1)010AS T322F187(1)010AS T322F227(1)010AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.8 0.8 0.8 1.0 1.2 1.4 1.5 1.5 1.5 2.2 2.2 2.2 2.6 2.6 2.6 3.1 3.1 3.1 3.8 3.8 3.8 4.4 5.0 5.0 8.0 9.6 10.0 10.0 10.0 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 CX05F335K CX05F335M T323A335K010AS T323A335M010AS CX05F106K CX05F106M T323B106K010AS T323B106M010AS CX05F226K CX05F226M T323C226K010AS T323C226M010AS CX05F276K CX05F276M T323D276K010AS T323D276M010AS CX05F336K CX05F336M T323D336K010AS T323D336M010AS CX05F396K CX05F396M T323D396K010AS T323D396M010AS CX05F476K CX05F476M T323D476K010AS T323D476M010AS 15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C T322A155(1)015AS T322A185(1)015AS T322A225J015AS T322A225K015AS T322A225M015AS T322B275(1)015AS T322B335(1)015AS T322B395(1)015AS T322B475(1)015AS T322B565(1)015AS T322B685J015AS T322B685K015AS T322B685M015AS T322C825(1)015AS T322C106(1)015AS T322C126(1)015AS T322C156J015AS T322C156K015AS T322C156M015AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.7 0.8 0.8 0.8 1.0 1.2 1.4 1.5 1.5 1.5 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 CX05H225K CX05H225M T323A225K015AS T323A225M015AS CX05H685K CX05H685M T323B685K015AS T323B685M015AS CX05H156K CX05H156M T323C156K015AS T323C156M015AS (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Face lines indicate preferred part types and values. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 45 T322/T323 Series Tantalum Molded / Axial 10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES RATINGS & PART NUMBER REFERENCE KEMET T322 SERIES CAPACITANCE µF CASE SIZE CAPACITANCE TOLERANCE ±% 18.0 22.0 22.0 22.0 27.0 33.0 33.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 D D D D D D D D E E E E E E F F 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 1.0 1.2 1.5 1.5 1.5 1.8 2.2 2.7 3.3 3.9 4.7 4.7 4.7 5.6 6.8 8.2 10.0 12.0 12.0 12.0 15.0 15.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 A A A A A B B B B B B B B C C C C D D D D D D D D E E E E E E F F 5,10,20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5 10 20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 A A A A A A A B B B B B B B B B 5,10,20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5 10 20 5 10 20 5 10 KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 MILITARY PART NUMBER KEMET PART NUMBER 15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C (Cont’d) T322D186(1)015AS T322D226J015AS T322D226K015AS T322D226M015AS T322D276(1)015AS T322D336J015AS T322D336K015AS T322D336M015AS T322E396(1)015AS T322E476(1)015AS T322E566(1)015AS T322E686(1)015AS T322E826(1)015AS T322E107(1)015AS T322F127(1)015AS T322F157(1)015AS 2.2 2.6 2.6 2.6 3.2 4.0 4.0 4.0 4.7 5.0 6.7 8.2 9.8 10.0 10.0 10.0 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 CX05H226K CX05H226M T323D226K015AS T323D226M015AS CX05H336K CX05H336M T323D336K015AS T323E336M015AS 20 VOLT RATING AT 85°C — 13 VOLT RATING AT 125°C T322A105(1)020AS T322A125(1)020AS T322A155J020AS T322A155K020AS T322A155M020AS T322B185(1)020AS T322B225(1)020AS T322B275(1)020AS T322B335(1)020AS T322B395(1)020AS T322B475J020AS T322B475K020AS T322B475M020AS T322C565(1)020AS T322C685(1)020AS T322C825(1)020AS T322C106(1)020AS T322D126J020AS T322D126K020AS T322D126M020AS T322D156J020AS T322D156K020AS T322D156M020AS T322D186(1)020AS T322D226(1)020AS T322E276(1)020AS T322E336(1)020AS T322E396(1)020AS T322E476(1)020AS T322E566(1)020AS T322E686(1)020AS T322F826(1)020AS T322F107(1)020AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.8 0.8 0.8 0.9 1.1 1.3 1.6 1.9 1.9 1.9 2.4 2.4 2.4 2.9 3.5 4.3 5.0 6.2 7.5 8.9 10.0 10.0 10.0 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 CX05J155K CX05J155M T323A155K020AS T323A155M020AS CX05J475K CX05J475M T323B475K020AS T323B475M020AS CX05J126K CX05J126M T323D126K020AS T323D126M020AS CX05J156K CX05J156M T323D156K020AS T323D156M020AS 25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C 0.47 0.56 0.68 0.82 1.0 1.0 1.0 1.2 1.5 1.5 1.5 1.8 1.8 1.8 2.2 2.2 T322A474(1)025AS T322A564(1)025AS T322A684(1)025AS T322A824(1)025AS T322A105J025AS T322A105K025AS T322A105M025AS T322B125(1)025AS T322B155J025AS T322B155K025AS T322B155M025AS T322B185J025AS T322B185K025AS T322B185M025AS T322B225J025AS T322B225K025AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 CX05K105K CX05K105M T323A105K025AS T323A105M025AS CX01K155K CX01K155M T323B155K025AS T323B155M020AS CX01K185K CX01K185M T323B185K025AS T323B185M025AS CX05K225K T323B225K025AS (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Face lines indicate preferred part types and values. 46 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES RATINGS & PART NUMBER REFERENCE KEMET T322 SERIES CAPACITANCE TOLERANCE ±% CAPACITANCE µF CASE SIZE 2.2 2.7 3.3 3.3 3.3 3.9 4.7 5.6 6.8 6.8 6.8 8.2 10.0 10.0 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 B B B B B C C C C C C C C C C D D E E E E E E F F 20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B B C C C C C C C C C C C C 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5 10 20 5,10,20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5,10,20 5,10,20 5,10,20 5 10 20 5 10 20 5 10 20 KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 MILITARY PART NUMBER KEMET PART NUMBER 25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C (Cont’d) T322B225M025AS T322B275(1)025AS T322B335J025AS T322B335K025AS T322B335M025AS T322C395(1)025AS T322C475(1)025AS T322C565(1)025AS T322C685J025AS T322C685K025AS T322C685M025AS T322C825(1)025AS T322C106J025AS T322C106K025AS T322C106M025AS T322D126(1)025AS T322D156(1)025AS T322E186(1)025AS T322E226(1)025AS T322E276(1)025AS T322E336(1)025AS T322E396(1)025AS T322E476(1)025AS T322F566(1)025AS T322F686(1)025AS 0.5 0.5 0.7 0.7 0.7 0.8 0.9 1.1 1.4 1.4 1.4 1.5 1.5 1.5 1.5 2.4 3.0 3.6 4.4 5.4 6.6 7.8 9.4 10.0 10.0 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 CX01/5K225M T323B225M025AS CX05K335K CX05K335M T323B335K025AS T323B335M025AS CX05K685K CX05K685M T323C685K025AS T323C685M025AS CX05K106K CX05K106M T323C106K025AS T323C106M025AS T322A104(1)035AS T322A124(1)035AS T322A154(1)035AS T322A184(1)035AS T322A224(1)035AS T322A274(1)035AS T322A334J035AS T322A334K035AS T322A334M035AS T322A394(1)035AS T322A474J035AS T322A474K035AS T322A474M035AS T322B564J035AS T322B564K035AS T322B564M035AS T322B684J035AS T322B684K035AS T322B684M035AS T322B824J035AS T322B824K035AS T322B824M035AS T322B105J035AS T322B105K035AS T322B105M035AS T322B125J035AS T322B125K035AS T322B125M035AS T322B155J035AS T322B155K035AS T322B155M035AS T322C185(1)035AS T322C225(1)035AS T322C275(1)035AS T322C335J035AS T322C335K035AS T322C335M035AS T322C395J035AS T322C395K035AS T322C395M035AS T322C475J035AS T322C475K035AS T322C475M035AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.8 0.9 0.9 0.9 1.1 1.1 1.1 1.3 1.3 1.3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 CX05M334K CX05M334M T323A334K035AS T323A334M035AS CX05M474K CX05M474M T323A474K035AS T323A474M035AS CX01M564K CX01M564M T323B564K035AS T323B564M035AS CX01M684K CX01M684M T323B684K035AS T323B684M035AS CX01M824K CX01M824M T323B824K035AS T323B824M035AS CX01M105K CX01M105M T323B105K035AS T323B105M035AS CX01M125K CX01M125M T323B125K035AS T323B125M035AS CX05M155K CX05M155M T323B155K035AS T323B155M035AS CX05M335K CX05M335M T323C335K035AS T323C335M035AS CX05M395K CX05M395M T323C395K035AS T323C395M035AS CX05M475K CX05M475M T323C475K035AS T323C475M035AS (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Face lines indicate preferred part types and values. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 47 T322/T323 Series Tantalum Molded / Axial 35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.33 0.33 0.39 0.47 0.47 0.47 0.56 0.56 0.56 0.68 0.68 0.68 0.82 0.82 0.82 1.0 1.0 1.0 1.2 1.2 1.2 1.5 1.5 1.5 1.8 2.2 2.7 3.3 3.3 3.3 3.9 3.9 3.9 4.7 4.7 4.7 TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES RATINGS & PART NUMBER REFERENCE KEMET T322 SERIES CAPACITANCE µF CASE SIZE CAPACITANCE TOLERANCE ±% 5.6 6.8 6.8 6.8 8.2 10.0 10.0 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 D D D D D D D D E E E E E E F F 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 0.1 0.1 0.1 0.12 0.15 0.15 0.15 0.18 0.22 0.22 0.22 0.27 0.33 0.33 0.33 0.39 0.39 0.39 0.47 0.47 0.47 0.56 0.68 0.68 0.68 0.82 1.0 1.0 1.0 1.2 1.5 1.5 1.5 1.8 2.2 2.2 2.2 2.7 3.3 3.3 3.3 3.9 4.7 4.7 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 A A A A A A A A A A A A B B B B B B B B B B B B B B B B B C C C C C C C C D D D D D D D D E E E E F F F F 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5 10 20 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5 10 20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 5,10,20 KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 MILITARY PART NUMBER KEMET PART NUMBER 35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C T322D565(1)035AS T322D685J035AS T322D685K035AS T322D685M035AS T322D825(1)035AS T322D106J035AS T322D106K035AS T322D106M035AS T322E126(1)035AS T322E156(1)035AS T322E186(1)035AS T322E226(1)035AS T322E276(1)035AS T322E336(1)035AS T322F396(1)035AS T322F476(1)035AS 1.6 1.9 1.9 1.9 2.3 2.8 2.8 2.8 3.3 4.2 5.0 6.2 7.5 9.2 10.0 10.0 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 CX05M685K CX05M685M T323D685K035AS T323D685M035AS CX05M106K CX05M106M T323D106K035AS T323D106M035AS 50 VOLT RATING AT 85°C — 33 VOLT RATING AT 125°C T322A104J050AS T322A104K050AS T322A104M050AS T322A124(1)050AS T322A154J050AS T322A154K050AS T322A154M050AS T322A184(1)050AS T322A224J050AS T322A224K050AS T322A224M050AS T322A274(1)050AS T322B334J050AS T322B334K050AS T322B334M050AS T322B394J050AS T322B394K050AS T322B394M050AS T322B474J050AS T322B474K050AS T322B474M050AS T322B564(1)050AS T322B684J050AS T322B684K050AS T322B684M050AS T322B824(1)050AS T322B105J050AS T322B105K050AS T322B105M050AS T322C125(1)050AS T322C155J050AS T322C155K050AS T322C155M050AS T322C185(1)050AS T322C225J050AS T322C225K050AS T322C225M050AS T322D275(1)050AS T322D335J050AS T322D335K050AS T322D335M050AS T322D395(1)050AS T322D475J050AS T322D475K050AS T322D475M050AS T322E565(1)050AS T322E685(1)050AS T322E825(1)050AS T322E106(1)050AS T322F126(1)050AS T322F156(1)050AS T322F186(1)050AS T322F226(1)050AS 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.9 0.9 0.9 1.1 1.3 1.3 1.3 1.6 1.9 1.9 1.9 2.2 2.7 3.2 4.0 4.8 6.0 7.2 8.8 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 CX05N104K CX05N104M T323A104K050AS T323A104M050AS CX05N154K CX05N154M T323A154K050AS T323A154M050AS CX05N224K CX05N224M T323A224K050AS T323A224M050AS CX05N334K CX05N334M T323B334K050AS T323B334M050AS CX05N394K CX05N394M T323B394K050AS T323B394M050AS CX05N474K CX05N474M T323B474K050AS T323B474M050AS CX05N684K CX05N684M T323B684K050AS T323B684M050AS CX05N105K CX05N105M T323B105K050AS T323B105M050AS CX05N155K CX05N155M T323C155K050AS T323C155M050AS CX05N225K CX05N225M T323C225K050AS T323C225M050AS CX05N335K CX05N335M T323D335K050AS T323D335M050AS CX05N475K CX05N475M T323D475K050AS T323D475M050AS (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Face lines indicate preferred part types and values. 48 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / RADIAL T330 Series KEMET T330 Series, polar-type, radial lead rectangular Precision Molded Tantalum (PMT) capacitors are primarily designed for applications that demand full use of the premium space available in printed circuitry and high density packaging. Compact, space saving T330 Series capacitors provide superior packing factor and space utilization compared with tubular units of the same microcoulomb (CV) rating. T330 Series capacitors employ a rectangular sintered, dry tantalum anode, transfer molded in precision dies with a high impact resistant plastic having excellent electrical, physical, and moisture resistant properties. All cases utilize gold color plastic which permits laser marking with outstanding permanency and legibility. The polarity is indicated by a + sign permanently marked on the case. The radius on the two vertical edges at the positive end of B, C, and D Cases can be used as a sensing dimension for automatic insertion processes. The location of the standoffs may serve a similar sensing function for the A Case. These standoffs, located in the base of all case sizes, provide vents for air circulation and also allow easy removal of flux residues from leadwire and circuit board solder joints. T330 Series capacitors are highly reliable and exhibit performance characteristics typical of military test standards. They are available in capacitance values ranging from 0.1 to 220 microfarads in ±20, ±10, ±5% tolerance levels, and in working voltages from 6 to 50 volts. At 85°C the capacitors will operate continuously at full rated voltage. They are rated to 125°C when operated at 2/3 of nameplate voltage. In addition, they feature exceptionally low DC leakage and Dissipation Factor characteristics. They are ideal for bypass, coupling, and timing applications in computers, military ordinance, industrial, entertainment, and consumer electronic equipment. T340 Series The compact space saving T340 Series is transfer molded in precision dies with a high impact resistant plastic having excellent electrical, physical, and moisture resistant properties. The gold color plastic case utilized permits laser marking with outstanding permanency and legibility. Marking is provided on the top of the case to allow visual inspection for proper polarity and placement after insertion. In addition, positive polarity identification is achieved by an easily recognized molded radius on the positive end of the case. This physical polarity identification is readily observed after capacitor placement as a further aid to the top marking in prevention of possible reverse insertion. Standoffs, located in the base of all case sizes, provide vents for air circulation and also allow easy removal of flux residues from leadwire and circuit board solder joints. With very low impedance and ESR values, the T340 Series features exceptionally low DC leakage and DF characteristics. The T340 Series is available in standard ±20%; ±10%; ±5% (special order) capacitance tolerance. T340 Series capacitors are highly reliable and exhibit performance characteristics typical of military test standards. PERFORMANCE CHARACTERISTICS • CAPACITANCE/VOLTAGE RANGE: T330: 0.1-220µF, 6-50 Volts. T340: 0.1-330µF, 6-50 Volts. • CAPACITANCE TOLERANCE: Available in standard EIA nominal values with ±20% tolerance standard, ±10% and ±5% available on special order. • DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listing. See Application Notes Section, page 78. • DC LEAKAGE CURRENT: Maximum leakage values at 25°C are shown in part number listings, pages 51, 52, 55, 56 and 57. See Application Notes Section, page 76. • RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, pages 76 & 77 for description. • IMPEDANCE and ESR: See Application Notes Section, page 77 & 78 for additional information. Reference ESR values are shown in table below. • AC RIPPLE VOLTAGE: Permissible AC ripple voltage is related to ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined and are listed in Table below. For additional description see page 78. Series T330/T340 ESR (OHMS) at 100 kHz @ +25°C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here,is made as to the accuracy of these values for any particular T330/T340 Series product.) Cap. µF 0.10 0.15 0.22 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 6 Volt 8.0 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 0.9 0.7 10 Volt 8.0 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 0.8 0.6 15 Volt 6.0 5.0 4.0 3.2 2.5 2.0 1.6 1.3 1.0 0.8 0.6 20 Volt 7.0 5.5 4.5 3.6 2.9 2.3 1.8 1.4 1.2 0.9 0.6 25 Volt 8.0 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 1.0 0.8 35 Volt 50 Volt 26.0 21.0 17.0 15.0 13.0 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 1.0 0.8 26.0 21.0 17.0 15.0 13.0 10.0 8.0 5.0 3.5 3.0 2.5 2.0 1.6 1.2 1.0 T330/T340 T330 T340 only Case Size Watts A B C D .09 .09 .100 .125 D/F E .125 .180 Maximum Power Dissipation: 25°C Ambient • ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 80, 81 and 82. • LEAD MATERIAL: Solder coated steel core with copper ply per MIL-STD-1276. • LEAD TAPE and REEL: Reeling per specification RS-468. See pages 71 and 73 for additional information. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 49 T330/T340 Series Tantalum Molded / Radial T330/T340 SERIES - PRECISION MOLDED — RADIAL LEAD — POLAR TYPE TANTALUM MOLDED / RADIAL T330 SERIES - PRECISION MOLDED - RADIAL LEAD CAPACITOR OUTLINE DRAWINGS W W A CASE .150±.005 (.38±.13) (Stand Off) H B, C, & D CASES .015±.005 (.38±.13) (Stand Off) H E E .500±.125 (12.7±.3.18) .500±.125 (12.7±.3.18) .020±.001 (.51±.03) .025±.001 (.64±.03) S S T .050R±.005 (1.27R±.13) T Note: On the "B" case size the stand off appears only between the two leadss DIMENSIONS — INCHES & (MILLIMETERS) CASE SIZE H CASE HEIGHT W CASE WIDTH T CASE THICKNESS E CASE TO WIRE S LEAD SPACING A .345 ± .008 (8.76 ± .203) .230 ± .005 (5.84 ± .127) .105 ± .005 (2.67 ± .127) .050 ± .010 (1.27 ± .25) .125 ± .005 (3.18 ± .127) B .225 ± .015 (5.71 ± 0.38) .285 ± .015 (7.24 ± 0.38) .170 ± .015 (4.32 ± 0.38) .042 ± .010 (1.07 ± .25) .200 ± .005 (5.08 ± .127) C .325 ± .015 (8.26 ± 0.38) .325 ± .015 (8.26 ± 0.38) .170 ± .015 (4.32 ± 0.38) .062 ± .010 (1.57 ± 0.25) .200 ± .005 (5.08 ± .127) D .375 ± .015 (9.53 ± 0.38) .600 ± .015 (15.24 ± 0.38) .195 ± .015 (4.95 ± 0.38) .200 ± .010 (5.08 ± 0.25) .200 ± .005 (5.08 ± .127) T ORDERING INFORMATION 330 B 104 M 035 A TANTALUM S* LEAD MATERIAL S — Standard (Solder-Coated Nickel) SERIES FAILURE RATE LEVEL Radial Lead Precision Molded Polar Solid Tantalum A — Not Applicable VOLTAGE RATING CASE SIZE CAP. TOLERANCE A/B/C/D M — ±20% — Std. K — ±10% — Std. PICOFARAD CODE First two digits are significant figures. Third digit is the number of zeros following. J — ±5% — Available on request *Part Number Example: T330B104M035AS (14 digits – no spaces) MARKING INFORMATION Capacitance 4.7K 25K + Tolerance: 5% - J 10% - K 20% - Standard (no mark) Polarity KEMET Trademark Voltage Rating 50 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / RADIAL T330 SERIES - PRECISION MOLDED - RADIAL LEAD A CASE CAPACITANCE µF CASE SIZE KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120Hz CAPACITANCE µF CASE SIZE KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120Hz 6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C 35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C 18.0 A T330A186(1)006AS 1 6 22.0 A T330A226(1)006AS 1 6 10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C 0.39 A T330A394(1)035AS 1 3 0.47 A T330A474(1)035AS 1 3 0.56 A T330A564(1)035AS 1 3 0.68 A T330A684(1)035AS 1 3 0.82 A T330A824(1)035AS 1 3 1.0 A T330A105(1)035AS 1 3 1.2 A T330A125(1)035AS 1 4 1.5 A T330A155(1)035AS 1 4 1.8 A T330A185(1)035AS 1 4 2.2 A T330A225(1)035AS 1 4 2.7 A T330A275(1)035AS 1 4 50 VOLT RATING AT 85°C — 33 VOLT RATING AT 125°C 10.0 A T330A106(1)010AS 1 6 12.0 A T330A126(1)010AS 1 6 15.0 A T330A156(1)010AS 1 6 15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C 8.2 A T330A825(1)015AS 1 6 20 VOLT RATING AT 85°C — 13 VOLT RATING AT 125°C 1 6 5.6 A T330A565(1)020AS 6.8 A T330A685(1)020AS 1 6 25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C 3.3 A T330A335(1)025AS 1 4 3.9 A T330A395(1)025AS 1 4 4.7 A T330A475(1)025AS 1 35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C 0.10 0.12 0.15 0.18 0.22 0.27 0.33 A A A A A A A T330A104(1)035AS T330A124(1)035AS T330A154(1)035AS T330A184(1)035AS T330A224(1)035AS T330A274(1)035AS T330A334(1)035AS 1 1 1 1 1 1 1 3 3 3 3 3 3 3 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 A A A A A A A A A A A A A A A T330A104(1)050AS T330A124(1)050AS T330A154(1)050AS T330A184(1)050AS T330A224(1)050AS T330A274(1)050AS T330A334(1)050AS T330A394(1)050AS T330A474(1)050AS T330A564(1)050AS T330A684(1)050AS T330A824(1)050AS T330A105(1)050AS T330A125(1)050AS T330A155(1)050AS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 KEMET PART NUMBER D.C. LEAKAGE µA@25°C 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 B, C & D CASES CAPACITANCE µF CASE SIZE KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120Hz CAPACITANCE µF CASE SIZE MAX. DISSIPATION FACTOR %@25°C, 120Hz 6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C 10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C 10.0 B T330B106(1)006AS 1 6 12.0 B T330B126(1)006AS 1 6 15.0 B T330B156(1)006AS 1 6 18.0 B T330B186(1)006AS 1 6 22.0 B T330B226(1)006AS 1 6 1 6 27.0 C T330C276(1)006AS 33.0 C T330C336(1)006AS 1 6 39.0 C T330C396(1)006AS 1 6 47.0 C T330C476(1)006AS 2 6 56.0 C T330C566(1)006AS 5 6 68.0 C T330C686(1)006AS 5 6 82.0 D T330D826(1)006AS 5 6 100.0 D T330D107(1)006AS 5 6 120.0 D T330D127(1)006AS 5 6 150.0 D T330D157(1)006AS 5 6 180.0 D T330D187(1)006AS 10 6 220.0 D T330D227(1)006AS 10 8 10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C 33.0 C T330C336(1)010AS 2 6 39.0 C T330C396(1)010AS 5 6 47.0 D T330D476(1)010AS 5 6 56.0 D T330D566(1)010AS 5 6 68.0 D T330D686(1)010AS 5 6 82.0 D T330D826(1)010AS 5 6 100.0 D T330D107(1)010AS 10 6 120.0 D T330D127(1)010AS 10 6 150.0 D T330D157(1)010AS 10 6 15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 B B B B B B C C C T330B565(1)010AS T330B685(1)010AS T330B825(1)010AS T330B106(1)010AS T330B126(1)010AS T330B156(1)010AS T330C186(1)010AS T330C226(1)010AS T330C276(1)010AS 1 1 1 1 1 1 1 2 2 6 6 6 6 6 6 6 6 6 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 B B B B B C C C C C C C D D D D D T330B395(1)015AS T330B475(1)015AS T330B565(1)015AS T330B685(1)015AS T330B825(1)015AS T330C106(1)015AS T330C126(1)015AS T330C156(1)015AS T330C186(1)015AS T330C226(1)015AS T330C276(1)015AS T330C336(1)015AS T330D396(1)015AS T330D476(1)015AS T330D566(1)015AS T330D686(1)015AS T330D826(1)015AS 1 1 1 1 1 1 1 2 5 5 5 5 10 10 10 10 10 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 (1) To complete Part Number insert Capacitance Tolerance Symbol in the 9th character, M — ±20%, K — ±10%, J — ±5%. Bold face lines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 51 T330 Series Tantalum Molded / Radial RATINGS & PART NUMBER REFERENCE TANTALUM MOLDED / RADIAL T330 SERIES - PRECISION MOLDED - RADIAL LEADS B, C & D CASES (Cont’d) CAPACITANCE µF CASE SIZE KEMET PART NUMBER D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120Hz 25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C 2.7 3.3 3.9 4.7 B B B B T330B275(1)025AS T330B335(1)025AS T330B395(1)025AS T330B475(1)025AS 1 1 1 1 6 6 6 6 5.6 6.8 8.2 10.0 12.0 15.0 C C C C C C T330C565(1)025AS T330C685(1)025AS T330C825(1)025AS T330C106(1)025AS T330C126(1)025AS T330C156(1)025AS 1 1 1 1 1 2 6 6 6 6 6 6 18.0 D T330D186(1)025AS 5 6 22.0 D T330D226(1)025AS 5 6 27.0 D T330D276(1)025AS 5 6 5 6 33.0 D T330D336(1)025AS 39.0 D T330D396(1)025AS 10 6 47.0 D T330D476(1)025AS 10 6 35 VOLT RATING AT 85°C—23 VOLT RATING AT 125°C 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 B B B B B B B B B B B B B B B B B B B T330B104(1)035AS T330B124(1)035AS T330B154(1)035AS T330B184(1)035AS T330B224(1)035AS T330B274(1)035AS T330B334(1)035AS T330B394(1)035AS T330B474(1)035AS T330B564(1)035AS T330B684(1)035AS T330B824(1)035AS T330B105(1)035AS T330B125(1)035AS T330B155(1)035AS T330B185(1)035AS T330B225(1)035AS T330B275(1)035AS T330B335(1)035AS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 3.9 4.7 5.6 C C C T330C395(1)035AS T330C475(1)035AS T330C565(1)035AS 1 1 1 6 6 6 CAPACITANCE µF CASE SIZE KEMET PART NUMBER 35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C 6.8 8.2 10.0 C C C T330C685(1)035AS T330C825(1)035AS T330C106(1)035AS 2 5 5 6 6 6 12.0 D T330D126(1)035AS 5 6 15.0 D T330D156(1)035AS 5 6 18.0 D T330D186(1)035AS 10 6 22.0 D T330D226(1)035AS 10 6 27.0 D T330D276(1)035AS 10 6 33.0 D T330D336(1)035AS 10 6 50 VOLT RATING AT 85°C—33 VOLT RATING AT 125°C 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 B B B B B B B B B B B B B B B B B T330B104(1)050AS T330B124(1)050AS T330B154(1)050AS T330B184(1)050AS T330B224(1)050AS T330B274(1)050AS T330B334(1)050AS T330B394(1)050AS T330B474(1)050AS T330B564(1)050AS T330B684(1)050AS T330B824(1)050AS T330B105(1)050AS T330B125(1)050AS T330B155(1)050AS T330B185(1)050AS T330B225(1)050AS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 2.7 3.3 3.9 4.7 5.6 C C C C C T330C275(1)050AS T330C335(1)050AS T330C395(1)050AS T330C475(1)050AS T330C565(1)050AS 1 2 5 5 5 6 6 6 6 6 6.8 8.2 10.0 12.0 15.0 18.0 D D D D D D T330D685(1)050AS T330D825(1)050AS T330D106(1)050AS T330D126(1)050AS T330D156(1)050AS T330D186(1)050AS 5 5 5 5 10 10 6 6 6 6 6 6 (1) To complete Part Number insert Capacitance Tolerance Symbol in the 9th character, M — ±20%, K — ±10%, J — ±5%. Bold face lines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. 52 D.C. LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120Hz KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / RADIAL T340 SERIES - PRECISION MOLDED - RADIAL LEADS Effective September 30, 2005, the KEMET T340 Series is RoHS compliant. CAPACITOR OUTLINE DRAWINGS TOP T T A Case T T T SIDE W W H H W H H H T340 Series Tantalum Molded / Radial W W L L L D D D L D L D S S A Case B Case S S S C Case D or F Case E Case F case size is the same as D, but with .200" (5.0 mm) lead spacing. Specify T340F when ordering this spacing. DIMENSIONS — INCHES & MILLIMETERS CASE SIZE A B C D E F H** (MAX) H Inches mm .287 7.3 .327 8.3 .413 10.5 .413 10.5 .413 10.5 .413 10.5 W (MAX) W Inches mm .185 4.7 .283 7.2 .287 7.3 .484 12.3 .484 12.3 .484 12.3 T (MAX) T inches mm .165 4.2 .157 4.0 .169 4.3 .287 7.3 .484 12.3 .287 7.3 LEAD SPACING S Inches mm ±.020 ±.5 .100 2.5 .200 5.0 .200 5.0 .400 10.0 .400 10.0 .200 5.0 LEAD LENGTH L Inches mm ±.078 ±2.0 .600 15.0 .600 15.0 .600 15.0 .600 15.0 .600 15.0 .600 15.0 LEAD DIAMETER D Inches mm ±.001 ±.03 .020 0.50 .020 0.50 .020 0.50 .025 0.64 .025 0.64 .025 0.64 **Includes Standoff Height of .015 ± .005” (.38 ± .13 mm) for All Case Sizes. T ORDERING INFORMATION 340 A 105 M 035 A S* TANTALUM LEAD MATERIAL SERIES S — Standard (solder-coated copperweld) T – 100% tin Radial Lead Precision Molded Polar Solid Tantalum FAILURE RATE LEVEL A — Not Applicable CASE SIZE VOLTAGE RATING A/B/C/D/E/F CAPACITANCE TOLERANCE PICOFARAD CODE First two digits are significant figures. Third digit is the number of zeros following. *Part Number Example: T340A105M035AS (14 digits – no spaces) M — ±20% — Std. K — ±10% Available on J — ±5% request KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 } 53 TANTALUM MOLDED / RADIAL T340 SERIES MARKING INFORMATION American Capacitance (in Microfarads) Polarity Voltage 4.7J + 10 K KEMET Trademark 10K + 16 K A Case 47J + 16 K 33K + 10 K B Case C Case 220J + 10 K D & F Case Capacitance Tolerance ±5% - J ±10% - K ±20% - Standard, (no marking) E Case European Capacitance (in Microfarads) Polarity Voltage 4.7J + 10 K KEMET Trademark 10K + 16 K A Case 33K + 10 K B Case C Case 47J + 16 K 220J + 10 K D & F Case E Case = DIN. Specification Date Code Insert Date Code as follows: 54 1st digit - represents year 2nd digit - represents month L - 2000 M - 2001 N - 2002 O - 2003 P - 2004 1 - 9 for January - September O for October N for November D for December Q- 2005 R - 2006 S - 2007 T - 2008 U - 2009 Capacitance Tolerance ±5% - J ±10% - K ±20% - Standard, (no marking) KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / RADIAL T340 SERIES RATINGS & PART NUMBER REFERENCE MAX. DC LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ MAX. IMPEDANCE Ω@ 10 kHz CAPACIITANCE µF CASE SIZE KEMET PART NUMBER 10.0 15.0 A A T340A106(1)003AS T340A156(1)003AS 1.0 1.0 6 6 6.0 3.2 33.0 47.0 B B T340B336(1)003AS T340B476(1)003AS 1.5 3.0 6 6 2.1 1.8 68.0 100.0 C C T340C686(1)003AS T340C107(1)003AS 4.0 5.0 6 6 1.5 1.2 6.8 A T340A685(1)006AS 1.0 6 6.0 10.0 12.0 15.0 18.0 22.0 B B B B B T340B106(1)006AS T340B126(1)006AS T340B156(1)006AS T340B186(1)006AS T340B226(1)006AS 1.0 1.0 1.0 1.0 2.5 6 6 6 6 6 2.1 27.0 33.0 39.0 47.0 56.0 68.0 C C C C C C T340C276(1)006AS T340C336(1)006AS T340C396(1)006AS T340C476(1)006AS T340C566(1)006AS T340C686(1)006AS 2.5 2.5 2.5 3.0 5.0 5.0 6 6 6 6 6 6 82.0 100.0 120.0 150.0 180.0 220.0 D/F D/F D/F D/F D/F D/F T340(2)826(1)006AS T340(2)107(1)006AS T340(2)127(1)006AS T340(2)157(1)006AS T340(2)187(1)006AS T340(2)227(1)006AS 5.0 5.0 5.0 8.0 10.0 10.0 6 6 6 6 6 6 330.0 E T340E337(1)006AS 10.0 8 4.7 A T340A475(1)010AS 1.0 6 7.5 5.6 6.8 8.2 10.0 12.0 15.0 B B B B B B T340B565(1)010AS T340B685(1)010AS T340B825(1)010AS T340B106(1)010AS T340B126(1)010AS T340B156(1)010AS 1.0 1.0 1.0 1.0 1.0 3.0 6 6 6 6 6 6 2.5 18.0 22.0 27.0 33.0 39.0 C C C C C T340C186(1)010AS T340C226(1)010AS T340C276(1)010AS T340C336(1)010AS T340C396(1)010AS 3.0 3.0 3.0 5.0 5.0 6 6 6 6 6 47.0 56.0 68.0 82.0 100.0 120.0 150.0 D/F D/F D/F D/F D/F D/F D/F T340(2)476(1)010AS T340(2)566(1)010AS T340(2)686(1)010AS T340(2)826(1)010AS T340(2)107(1)010AS T340(2)127(1)010AS T340(2)157(1)010AS 5.0 5.0 5.0 8.0 10.0 10.0 10.0 6 6 6 6 6 6 6 220.0 E T340E227(1)010AS 10.0 6 3 VOLT RATING AT 85°C — 2 VOLT AT 125°C T340 Series Tantalum Molded / Radial 6/6.3 VOLT RATING AT 85°C — 4 VOLT AT 125°C 1.5 0.8 0.5 10 VOLT RATING AT 85°C — 6 VOLT AT 125°C 1.7 1.0 0.5 15/16 VOLT RATING AT 85°C — 10 VOLT AT 125°C 3.3 A T340A335(1)015AS 1.0 6 9.0 3.9 4.7 5.6 6.8 8.2 10.0 B B B B B B T340B395(1)015AS T340B475(1)015AS T340B565(1)015AS T340B685(1)015AS T340B825(1)015AS T340B106(1)015AS 1.0 1.0 1.0 1.0 1.0 3.0 6 6 6 6 6 6 3.2 (1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information. (2) To complete KEMET Part Number, insert letter “D” for 10.0 mm (.394) lead spacing or letter “F” for 5.0 mm (.197) lead spacing. See page 53 for outline drawings. Bold face lines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 55 TANTALUM MOLDED / RADIAL T340 SERIES RATINGS & PART NUMBER REFERENCE MAX. DC LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ MAX IMPEDANCE Ω@ 10 kHz CAPACITANCE µF CASE SIZE 12.0 15.0 18.0 22.0 27.0 33.0 C C C C C C T340C126(1)015AS T340C156(1)015AS T340C186(1)015AS T340C226(1)015AS T340C276(1)015AS T340C336(1)015AS 3.0 3.5 4.0 4.0 5.0 5.0 6 6 6 6 6 6 39.0 47.0 56.0 68.0 82.0 D/F D/F D/F D/F D/F T340(2)396(1)015AS T340(2)476(1)015AS T340(2)566(1)015AS T340(2)686(1)015AS T340(2)826(1)015AS 7.0 7.0 8.0 9.0 10.0 6 6 6 6 6 100.0 150.0 E E T340E107(1)015AS T340E157(1)015AS 10.0 10.0 6 6 2.2 A T340A225(1)020AS 1.0 6 12.0 3.3 4.7 6.8 B B B T340B335(1)020AS T340B475(1)020AS T340B685(1)020AS 1.0 1.5 2.5 6 6 6 8.0 5.5 4.2 15.0 C T340C156(1)020AS 5.0 6 2.5 47.0 D T340D476(1)020AS 9.0 6 1.3 100.0 E T340E107(1)020AS 10.0 6 0.8 KEMET PART NUMBER 15/16 VOLT RATING AT 85°C — 10 VOLT AT 125°C (Cont’d) 2.5 2.1 1.3 1.1 0.8 0.6 20 VOLT RATING AT 85°C — 13 VOLT AT 125°C 25 VOLT RATING AT 85°C — 16 VOLT AT 125°C 1.5 A T340A155(1)025AS 1.0 6 17.0 2.7 3.3 3.9 4.7 B B B B T340B275(1)025AS T340B335(1)025AS T340B395(1)025AS T340B475(1)025AS 1.0 1.0 1.0 2.0 6 6 6 6 5.5 5.6 6.8 8.2 10.0 12.0 15.0 C C C C C C T340C565(1)025AS T340C685(1)025AS T340C825(1)025AS T340C106(1)025AS T340C126(1)025AS T340C156(1)025AS 2.0 3.0 3.0 3.5 3.5 4.0 6 6 6 6 6 6 18.0 22.0 27.0 33.0 39.0 47.0 D/F D/F D/F D/F D/F D/E/F T340(2)186(1)025AS T340(2)226(1)025AS T340(2)276(1)025AS T340(2)336(1)025AS T340(2)396(1)025AS T340(2)476(1)025AS 5.0 5.5 7.0 8.0 10.0 10.0 6 6 6 6 6 6 68.0 E T340E686(1)025AS 10.0 6 4.2 3.0 2.0 1.5 1.3 0.9 35 VOLT RATING AT 85°C — 23 VOLT AT 125°C 0.1 0.15 0.22 0.33 0.47 0.68 1.0 A A A A A A A T340A104(1)035AS T340A154(1)035AS T340A224(1)035AS T340A334(1)035AS T340A474(1)035AS T340A684(1)035AS T340A105(1)035AS 1.0 1.0 1.0 1.0 1.0 1.0 1.0 6 6 6 6 6 6 6 220.0 150.0 100.0 75.0 50.0 36.0 25.0 1.2 1.5 1.8 2.2 2.7 3.3 B B B B B B/C T340B125(1)035AS T340B155(1)035AS T340B185(1)035AS T340B225(1)035AS T340B275(1)035AS T340(2)335(1)035AS 1.0 1.0 1.0 1.0 1.0 1.0 6 6 6 6 6 6 15.0 11.0 7.5 (1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information. (2) To complete KEMET Part Number, insert letter “C” for 5.0 mm (.197”) lead spacing, “D” for 10.0 mm (.394”) lead spacing, “E” for 10.0 mm (.394”) lead spacing or “F” for 5.0 mm (.197”) lead spacing. See page 53 for outline drawings. Bold face lines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. 56 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / RADIAL T340 SERIES RATINGS & PART NUMBER REFERENCE MAX. DC LEAKAGE µA@25°C MAX. DISSIPATION FACTOR %@25°C, 120 HZ CAPACIITANCE µF CASE SIZE 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 C C C C C C D/F D/F D/F D/F D/F D/E/F T340C395(1)035AS T340C475(1)035AS T340C565(1)035AS T340C685(1)035AS T340C825(1)035AS T340(2)106(1 )035AS 1.0 2.5 2.5 3.0 4.0 4.0 6 6 6 6 6 6 T340(2)126(1)035AS T340(2)156(1)035AS T340(2)186(1)035AS T340(2)226(1)035AS T340(2)276(1)035AS T340(2)336(1)035AS 5.0 5.0 8.0 8.0 10.0 10.0 6 6 6 6 6 6 47.0 E T340E476(1)035AS 10.0 6 KEMET PART NUMBER MAX IMPEDANCE Ω@ 10 kHz 35 VOLT RATING AT 85°C — 23 VOLT AT 125°C (Cont’d) 5.5 4.2 2.8 2.2 1.9 1.4 T340 Series Tantalum Molded / Radial 1.1 40 VOLT RATING AT 85°C — 32 VOLT AT 100°C 0.1 0.15 0.22 0.33 0.47 0.68 1.0 A A A A A A A T340A104(1)040AS T340A154(1)040AS T340A224(1)040AS T340A334(1)040AS T340A474(1)040AS T340A684(1)040AS T340A105(1)040AS 1.0 1.0 1.0 1.0 1.0 1.0 1.0 6 6 6 6 6 6 6 200.0 140.0 95.0 70.0 46.0 34.0 23.0 1.5 2.2 B B T340B155(1)040AS T340B225(1)040AS 1.0 1.7 6 6 14.0 10.0 3.3 4.7 6.8 C C C T340C335(1)040AS T340C475(1)040AS T340C685(1)040AS 2.3 3.0 3.5 6 6 6 7.0 5.0 3.9 10.0 15.0 22.0 D D D T340D106(1)040AS T340D156(1)040AS T340D226(1)040AS 4.5 6.0 9.0 6 6 6 2.6 2.0 1.7 33.0 47.0 E E T340E336(1)040AS T340E476(1)040AS 10.0 10.0 6 6 1.3 1.0 50 VOLT RATING AT 85°C — 33 VOLT AT 125°C 0.1 0.15 0.22 0.33 A A A A T340A104(1)050AS T340A154(1)050AS T340A224(1)050AS T340A334(1)050AS 1.0 1.0 1.0 1.0 6 6 6 6 220.0 150.0 100.0 75.0 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 B B B B B B B B/C B B/C T340B394(1)050AS T340B474(1)050AS T340B564(1)050AS T340B684(1)050AS T340B824(1)050AS T340B105(1)050AS T340B125(1)050AS T340(2)155(1)050AS T340B185(1)050AS T340(2)225(1)050AS 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.1 1.5 6 6 6 6 6 6 6 6 6 6 2.7 3.3 3.9 4.7 5.6 C C/D C C/D C T340C275(1)050AS T340(2)335(1)050AS T340C395(1)050AS T340(2)475(1)050AS T340C565(1)050AS 1.5 2.5 3.0 3.5 4.0 6 6 6 6 6 6.8 8.2 10.0 12.0 15.0 18.0 D/F D/F D/F D/F D/F D/F T340(2)685(1)050AS T340(2)825(1)050AS T340(2)106(1)050AS T340(2)126(1)050AS T340(2)156(1)050AS T340(2)186(1)050AS 5.0 6.0 7.0 8.0 9.0 10.0 6 6 6 6 6 6 4.0 22.0 E T340E226(1)050AS 10.0 6 1.7 50.0 36.0 25.0 15.0 11.0 7.5 5.5 2.8 2.2 (1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information. (2) To complete KEMET Part Number, insert letter “C” for 5.0 mm (.197”) lead spacing, “D” for 10.0 mm (.394”) lead spacing, “E” for 10.0 mm (.394”) lead spacing or letter “F” for 5.0 mm (.197”) lead spacing. See page 53 for outline drawings. Bold face lines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 57 TANTALUM MOLDED / RADIAL — MIL-C-49137/6 T370/T378 (CX06) MIL-PRF-49137/6 SERIES The KEMET Micron Series is available in a variety of case styles and sizes. They are designed to operate from -55°C to +85°C at full voltage and to +125°C with derating. Typical applications include use in bypass coupling, filtering, and timing circuits. The KEMET Micron Series is qualified under MIL-PRF-49137/6 as military styles CX06 (T378 Series). The KEMET T370 Series is encapsulated in a molded gold color epoxy. This encasement technique allows maximum utilization of circuit board real estate with precisely centered leads in a microminiature case. These molded packages also provide significant improvements in overall dimensional consistency as well as lead wires precisely spaced to within .010 inches (.25mm). With our new molded packaging design, these capacitors can now be marked using our laser printing technique. The KEMET laser marking system ensures legibility and permanency while offering a complete alphanumeric print format. Laser print meets all requirements of the Resistance to Solvents Test, method 215 of MIL-STD-202. PERFORMANCE CHARACTERISTICS • CAPACITANCE/VOLTAGE RANGE: T370 Series: 0.68-220µF, 3-35 Volts. T378 Series: 2.2-220µF, 3-35 Volts. • CAPACITANCE TOLERANCE: Available in standard EIA nominal values with ±20% tolerance standard, +40% -20%, ±10% and ±5% are also available. • DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on page 60. See Application Notes Section, page 76 for additional information. • DC LEAKAGE CURRENT: Maximum leakage values at 25° are shown in part number listings, page 60. See Application Notes Section, page 76 for additional information. • RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, pages 76 & 77 for description. • IMPEDANCE and ESR: See Application Notes Section, pages 78 for description. Reference ESR values are listed in table below. age is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined and are listed in Table below. For additional description see page 78. • ENVIRONMENTAL CONSIDERATIONS: Case Size Watts C D E F .070 .080 .090 .100 Maximum Power Dissipation Capability @ 25°C A. Shock Test: MIL-STD-202, Method 213 Condition 1. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 80, 81 and 82. • LEAD MATERIAL: Solder coated nickel per MIL-STD1266, type N32. • AC RIPPLE VOLTAGE: Permissible AC ripple voltT370 ESR (OHMS) at 100 kHz @ +25°C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of these values for any particular T370 Series product.) Cap. µF 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 58 6 Volt 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 10 Volt 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 15 Volt 2.5 2.0 1.6 1.3 1.0 20 Volt 5.5 4.5 3.6 2.9 2.3 1.8 1.4 1.2 25 Volt 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 • LEAD TAPE and REEL: Reeling per specification RS-468. See pages 72 and 74 for additional information. 35 Volt 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 TANTALUM MOLDED / RADIAL MIL-PRF-49137/6 T370/T378 (CX06) SERIES CAPACITOR OUTLINE DRAWING T370 T378 T W DIMENSIONS - INCHES (MILLIMETER) CASE SIZE H MAX. W MAX. T MAX. S LEAD SPACING LEAD DIAMETER ± .001 (.03) *C .225 (5.72) .185 (4.70) .075 (1.91) .150 ± .010 (3.81 ± .25) .016 (.41) D .290 (7.37) .220 (5.59) .110 (2.79) .180 ± .010 (4.57 ± .25) .016 (.41) E .310 (7.87) .230 (5.84) .130 (3.30) .200 ± .010 (5.08 ± .25) .016 (.41) F .475 (12.07) .375 (9.53) .150 (3.81) .300 ± .010 (7.62 ± .25) .016 (.41) H *C case size T370 style only. 1.375± .125 (34.93±3.18) S 1.625±.125 (41.28±3.18) CAPACITOR MARKING (-) (+) INDUSTRIAL PRODUCT Leads Lengths Both .350±.050 (8.89±1.27) MILITARY PRODUCT T370 KEMET Trademark Military Part Number Voltage Rating Polarity Indicator (+) KEMET Trademark CX06M226M 0126VDK Polarity Indicator (+) 106M 020K Capacitance Tolerance T378 Lot Code Date Code (Year/Week) Capacitance Value (pf code) ORDERING INFORMATION KEMET PART NUMBER 37X D 475 M 035 A S* T370/T378 Series Tantalum Molded / Radial T TANTALUM LEAD MATERIAL SERIES T370, T378 S — Standard (solder-coated nickel) CASE SIZE FAILURE RATE LEVEL A — Not Applicable VOLTAGE RATING CAPACITANCE IN PICOFARAD CODE First two digits are significant figures. Third figure is the number of zeros following. CAPACITANCE TOLERANCE M — ±20%, K — ±10%, J — ±5% L — +40%, -20% *Part Number Example: T370D475M035AS (14 digits – no spaces) MIL-PRF-49137/6 PART NUMBER CX06(T378) STYLE CX TYPE 06 D 335 K CAPACITANCE TOLERANCE Fixed, solid tantalum, polar, nonhermetically sealed capacitors. Symbol STYLE K M 06-T378 (radial leads) VOLTAGE Capacitance Tolerance Percent ± 10 20 CAPACITANCE Symbol Rated (85°C) Volts, dc Surge (85°C) Volts, dc A B C D F H J K M 2 3 4 6 10 15 20 25 35 2.6 4 5 8 13 20 26 32 46 The nominal capacitance value, expressed in picofarads (pF), is identified by a three digit number. The first two digits represent significant figures and the last digit specifies the number of zeros to follow. KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 59 TANTALUM MOLDED / RADIAL — MIL-PRF-49137/6 T370/T378 (CX06) SERIES RATINGS & PART NUMBER REFERENCE CAPACITANCE µF CASE SIZE INDUSTRIAL PRODUCT T370 PART NO. 220.0 F T370F227(1)003AS MILITARY PRODUCT CXO6 PART NO. T378 PART NO. DC LEAKAGE µA@25°C MAXIMUM DISSIPATION FACTOR %@25°C 120HZ MAXIMUM 3 VOLT RATING AT 85°C—2.0 VOLT RATING AT 125°C CX06B227(2) T378F227(3)003AS 9.0 15 4 VOLT RATING AT 85°C—2.7 VOLT RATING AT 125°C 15.0 47.0 68.0 C D E T370C156(1)004AS T370D476(1)004AS T370E686(1)004AS CX06C476(2) CX06C686(2) T378D476(3)004AS T378E686(3)004AS 1.0 2.0 3.0 8 8 8 6 VOLT RATING AT 85°C—4.0 VOLT RATING AT 125°C 10.0 33.0 47.0 150.0 C D E F T370C106(1)006AS T370D336(1)006AS T370E476(1)006AS T370F157(1)006AS 6.8 22.0 33.0 100.0 C D E F T370C685(1)010AS T370D226(1)010AS T370E336(1)010AS T370F107(1)010AS 15.0 22.0 68.0 D E F T370D156(1)015AS T370E226(1)015AS T370F686(1)015AS 3.3 4.7 10.0 15.0 47.0 C C D E F T370C335(1)020AS T370C475(1)020AS T370D106(1)020AS T370E156(1)020AS T370F476(1)020AS CX06D336(2) CX06D476(2) CX06D157(2) T378D336(3)006AS T378E476(3)006AS T378F157(3)006AS 1.0 2.0 3.0 9.0 6 6 6 10 10 VOLT RATING AT 85°C—7.0 VOLT RATING AT 125°C CX06F226(2) CX06F336(2) CX06F107(2) T378D226(3)010AS T378E336(3)010AS T378F107(3)010AS 1.0 2.0 3.0 9.0 6 6 6 8 15 VOLT RATING AT 85°C—10 VOLT RATING AT 125°C CX06H156(2) CX06H226(2) CX06H686(2) T378D156(3)015AS T378E226(3)015AS T378F686(3)015AS 2.0 3.0 9.0 6 6 8 20 VOLT RATING AT 85°C—13 VOLT RATING AT 125°C CX06J106(2) CX06J156(2) CX06J476(2) T378D106(3)020AS T378E156(3)020AS T378F476(3)020AS 1.0 1.0 2.0 3.0 9.0 6 6 6 6 8 25 VOLT RATING AT 85°C—17 VOLT RATING AT 125°C 2.2 6.8 10.0 33.0 C D E F T370C225(1)025AS T370D685(1)025AS T370E106(1)025AS T370F336(1)025AS 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 C C C D D D E F F F T370C684(1)035AS T370C105(1)035AS T370C155(1)035AS T370D225(1)035AS T370D335(1)035AS T370D475(1)035AS T370E685(1)035AS T370F106(1)035AS T370F156(1)035AS T370F226(1)035AS CX06K685(2) CX06K106(2) CX06K336(2) T378D685(3)025AS T378E106(3)025AS T378F336(3)025AS 1.0 2.0 3.0 9.0 6 6 6 6 35 VOLT RATING AT 85°C—23 VOLT RATING AT 125°C CX06M225(2) CX06M335(2) CX06M475(2) CX06M685(2) CX06M106(2) CX06M156(2) CX06M226(2) T378D225(3)035AS T378D335(3)035AS T378D475(3)035AS T378E685(3)035AS T378F106(3)035AS T378F156(3)035AS T378F226(3)035AS 1.0 1.0 1.0 2.0 2.0 2.0 3.0 9.0 9.0 9.0 (1) To complete KEMET part number, insert capacitance tolerance symbol as follows: L = +40%, –20%; M = ±20%; K = ±10%; J = ±5%. (2) To complete military part number, insert capacitance tolerance symbol as follows: M = ±20%; K = ±10%. (3) To complete KEMET part number, insert capacitance tolerance symbol as follows: M = ±20%; K = ±10%. 60 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 6 6 6 6 6 6 6 6 6 6