CIRCUIT PROTECTORS No. 385 / TIP Telecom Interface Protector Specifications Packaging Lead Free 000: Tape/Ammopack (1400 pcs.) T ime-Current Characteristic Materials Transient Tolerant (T) Base/Cap: Brown Thermoplastic Polyamide PA 6.6, UL 94V0 Round Pins: Copper, Sn plated Standard UL 248-14 CSA C22.2 No. 248.14 Operating TTemperature emperature Approvals -40 ºC to +85 ºC (consider de-rating) cULus Recognized Climatic Category -40 ºC/+85 ºC/21 days (EN 60068-1,-2-1,-2-2,-2-78) Features Surge proof for telecom applications Reduced PCB space requirements Highly defined cut-off times Irreversible physical separation Low internal resistance Flame resistant encapsulated casing CCCe for China import Dimensions (mm) max. 4 max. 8 8,5 0,5 min 5,08 +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration W ebLinks 1,5 1 +0,1 18,8 ∅ 0,6 Stock Conditions Further infos see: www.wickmanngroup.com Lead Pull Strength Further application infos see Fuseology: Solderability 10N (EN 60068-2-21) www.wickmanngroup.com/download/ fuseology.pdf 260 ºC, ≤ 3 s (Wave) 350 ºC, ≤ 3 s (Soldering iron) Soldering Heat Resistance 260 ºC, 10 s (IEC 60068-2-20) Holes in PCB Marking , TIP, T, Current Rating Unit Weight 0.60 g (approx.) Limits for Pre-arcing Time 3.0 x IN 300 ms ... 5 s 0350 0500 0800 1100 1125 1150 1 FCC 47 Part 68: ITU-T K.20: Bellcore GR-1089: Order Information 050223 125V 125V 125V 125V 125V 125V 50 A / 125 V AC 50-60 Hz cos ϕ = 1.0 540 320 160 105 75 60 250 220 170 140 125 120 90 110 130 130 140 170 0.6 1.2 2.7 4.5 6.7 9.0 32 48 80 100 128 155 19 26 42 52 65 78 36 61 67 67 67 67 CCCe 350mA 500mA 800mA 1.00A 1.25A 1.50A Surge Amplitude (A)1 Approvals cURus Permissible continuous operating current is ≤ 70% at ambient temperature of 23ºC (73.4ºF). Rated Amp Voltage Breaking Cold Resistance Voltage Drop Power Dissipation Melting Integral 1.0 x IN 1.0 x IN 10 x IN Current Code Rating Capacity 0.1 x IN max. (mΩ) max. (mV) max. (mW) min. (A2s) ITU >2h Bellcore 1.0 x IN 350 mA ... 1.50 A FCC Rated Current • • • • • • • • • • • • Minimum pulse load quantity is 2 pulses at a test generator output of 800V and 10x560µs waveform. Minimum pulse load quantity is 30 pulses at a test generator output of 1000V, 67A and 10x700µs waveform. Minimum pulse load quantity is 50 pulses at a test generator output of 1000V and 10x1000µs. Qty. OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Series 385 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] CIRCUIT PROTECTORS 00 0,0 10 TIP / No. 385 I-t Characteristics ,00 10 (Min-Max Limit) Test value 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 5 6 7 8 9 10 15 IFault / I Rated Contact WICKMANN for individual I-t curves 050223 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]