TDA9983A HDMI transmitter up to 150 MHz pixel rate with 3 × 8-bit video inputs and 4 × I2S-bus with S/PDIF Rev. 01 — 13 March 2008 Product short data sheet 1. General description The TDA9983A is an HDMI transmitter (which also supports DVI) that enables a 3 × 8-bit RGB or YCBCR video stream (with a pixel rate up to 150 MHz for the TDA9983AHW/15 version), up to 4 I2S-bus audio streams (with an audio sampling rate up to 192 kHz) and the additional information required by all the HDMI 1.2a standards. A programmable upscaling block enables a 720p/1080i output from a standard definition input. An intrafield deinterlacer is included in the scaler. In order to be compatible with most applications, the TDA9983A integrates a full programmable input formatter and color space conversion block. The video input formats accepted are YCBCR 4 : 4 : 4 (up to 3 × 8-bit), YCBCR 4 : 2 : 2 semi-planar (up to 2 × 12-bit), YCBCR 4 : 2 : 2 compliant with ITU656 and ITU656-like (up to 1 × 12-bit). For ITU656-like formats, double edges are supported so that data can be sampled on rising and falling edges. The TDA9983A also includes a HDCP 1.1 compliant cipher block. The HDCP key set is stored internally in a One Time Programming (OTP) non-volatile memory for maximum security. The device can be controlled via an I2C-bus interface. TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter 720 × 480p (1) (2) (3) 4 1280 × 720p (1) 5 1920 × 1080i 6, 7 (NTSC) 720 × 16 1920 × 1080p 17, 18 720 × 576p (1) (2) (3) 19 1280 × 720p (1) 20 1920 × 1080i 21, 22 (PAL) 720 × 31 1920 × 1080p 480i 576i 576i 31 1080p × 1920 20 21, 22 (PAL) × 2, 3 720 19 1080i × 1920 17, 18 720 × 1280 × 576p 720p 16 1080p × 1920 5 6, 7 (NTSC) × 480i 720 4 1080i × 1920 2, 3 720 480p × VIDEO STANDARD INPUT FORMAT 861B 720p FORMAT 861B × 1280 VIDEO STANDARD OUTPUT (1) (4) (5) (6) (1) (1) (1) (4) (5) (6) (1) (1) 001aag258 All upscaling modes are available only for YCBCR 4 : 2 : 2 input format. (1) Pass through (2) Upscaling (3) Upscaling and interlacing (4) Deinterlacing (5) Deinterlacing and upscaling (6) Deinterlacing, upscaling and interlacing Fig 1. Input and output video scaler 2. Features n 3 × 8-bit video data input bus, CMOS and LV-TTL compatible n Horizontal synchronization, vertical synchronization and Data Enable (DE) inputs or VREF, HREF and FREF could be used for input data synchronization n Pixel rate clock input can be made active on one or both edges (selectable by I2C-bus) n The TDA9983A has 4 I2S-bus audio input channels and 1 S/PDIF channel; audio sampling rate up to 192 kHz n 250 MHz to 1.50 GHz HDMI transmitter operation n Programmable input formatter and upsampler/interpolator allows input of any of the 4 : 4 : 4, 4 : 2 : 2 semi-planar, 4 : 2 : 2 ITU656 and ITU656-like formats n Programmable color space converter: u RGB to YCBCR u YCBCR to RGB TDA9983A_SDS_1 Product short data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 13 March 2008 2 of 9 TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter n The upscaler enables a 720p/1080i output from a standard definition input using intelligent edge interpolation n Deals with multiple levels of HDCP receivers and repeaters n Internal SHA-1 calculation n Controllable via I2C-bus n Low power dissipation n 1.8 V and 3.3 V power supplies n Power-down mode n Hard reset 3. Applications n n n n n n n n n DVD players and recorders Set-Top Box (STB) AV receivers and amplifiers (repeater) Camcorders Digital still cameras Media players PVRs Media centers PCs, graphics add-in boards, notebook PCs Switches 4. Quick reference data Table 1. Quick reference data VDDA(FRO_3V3) = 3.0 V to 3.6 V; VDDA(PLL_3V3) = 3.0 V to 3.6 V; VDDH(3V3) = 3.0 V to 3.6 V; VDDD(3V3) = 3.0 V to 3.6 V; VDDC(1V8) = 1.65 V to 1.95 V; VPP = 0 V; Tamb = 0 °C to 70 °C. Typical values are measured at VDDA(FRO_3V3) = VDDA(PLL_3V3) = VDDH(3V3) = VDDD(3V3) = 3.3 V; VDDC(1V8) = 1.8 V; VPP = 0 V and Tamb = 25 °C; unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit TDA9983AHW/8 and TDA9983AHW/15 VDDA(FRO_3V3) free running oscillator 3.3 V analog supply voltage 3.0 3.3 3.6 V VDDA(PLL_3V3) PLL 3.3 V analog supply voltage 3.0 3.3 3.6 V VDDD(3V3) digital supply voltage (3.3 V) 3.0 3.3 3.6 V VDDH(3V3) HDMI supply voltage (3.3 V) 3.0 3.3 3.6 V VDDC(1V8) core supply voltage (1.8 V) 1.65 1.8 1.95 V Tamb ambient temperature 0 - 70 °C TDA9983AHW/8; up to 81 MHz fclk(max) Pcons [1][2] maximum clock frequency power consumption worst case Ptot total power dissipation worst case TDA9983A_SDS_1 Product short data sheet 81 - - MHz [1] - 329 - mW [2] - 343 512 mW [1] - 463 - mW [2] - 477 661 mW © NXP B.V. 2008. All rights reserved. Rev. 01 — 13 March 2008 3 of 9 TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter Table 1. Quick reference data …continued VDDA(FRO_3V3) = 3.0 V to 3.6 V; VDDA(PLL_3V3) = 3.0 V to 3.6 V; VDDH(3V3) = 3.0 V to 3.6 V; VDDD(3V3) = 3.0 V to 3.6 V; VDDC(1V8) = 1.65 V to 1.95 V; VPP = 0 V; Tamb = 0 °C to 70 °C. Typical values are measured at VDDA(FRO_3V3) = VDDA(PLL_3V3) = VDDH(3V3) = VDDD(3V3) = 3.3 V; VDDC(1V8) = 1.8 V; VPP = 0 V and Tamb = 25 °C; unless otherwise specified. Symbol Parameter Ppd power dissipation in power-down mode Conditions Min Typ Max Unit - 13.5 38.4 mW TDA9983AHW/15; up to 150 MHz fclk(max) maximum clock frequency [3] 150 - - MHz Pcons power consumption [3] - 361 583 mW Ptot total power dissipation [3] - 495 732 mW Ppd power dissipation in power-down mode - 13.5 38.4 mW [1] Video format: a) Input 480p (ITU656 embedded sync, rising edge) b) Output 1080i (YCBCR 4 : 2 : 2) [2] Worst case video format: a) Input 480p (YCBCR 4 : 2 : 2 semi-planar) b) Output 720p (YCBCR 4 : 2 : 2) [3] Video format: a) Input 1080p (RGB 4 : 4 : 4 external sync, rising edge) b) Output 1080p (RGB 4 : 4 : 4) 5. Ordering information Table 2. Ordering information Type number TDA9983AHW Package Name Description Version HTQFP80 plastic thermal enhanced thin quad flat package; 80 leads; body 12 × 12 × 1 mm; exposed die pad SOT841-4 5.1 Ordering options Table 3. Survey of type numbers Extended type number Sampling frequency (Msample/s) Application TDA9983AHW/8/C1xx 81 customer specific version TDA9983AHW/15/C1xx 150 customer specific version TDA9983A_SDS_1 Product short data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 13 March 2008 4 of 9 xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x 42 3 VDDH(3V3) VDDA(FRO_3V3) 13, 48, 16, 45, 23 71 59, 74 VDDA(PLL_3V3) 28, 34 38 I2C_SCL I2C_SDA 43 A0 44 41 A1 40 20 HPD AP7 to AP0 ACLK 18 HPD MANAGEMENT Rev. 01 — 13 March 2008 VPB[7:0] VPC[7:0] VSYNC/VREF HSYNC/HREF DE/FREF VCLK AUDIO PROCESSING IRQ GENERATION DATA ISLAND PACKET 68 to 70, 75 to 79 2 1 29 3 × 8-bit VIDEO INPUT PROCESSOR 80 66 UPSCALER(1) 32 HDCP 35 VSSC TXC+ TXC− TX0+ TX0− TX1+ TX1− TX2+ TX2− TDA9983A 2 × 12-bit or 1 × 12-bit 15, 60, 73 36 INT 22 VSSA(FRO_3V3) 39 VSSA(PLL_3V3) 25, 31, 37 VSSH 46 VSSA(PLL_1V8) 21 TM 24 EXT_SWING 001aaf280 TDA9983A 5 of 9 © NXP B.V. 2008. All rights reserved. (1) Block can be bypassed. DOWNSAMPLING FROM 4:4:4 TO 4 : 2 : 2(1) 33 DDC_SCL DDC_SDA 150 MHz pixel rate HDMI transmitter VSSD COLOR SPACE CONVERTER RGB TO YUV YUV TO RGB (4 : 4 : 4)(1) UPSAMPLING FROM 4:2:2 TO 4 : 4 : 4(1) DEINTERLACER INTRAFIELD(1) 14, 47, 72 Block diagram 30 HDMI SERIALIZER RGB YCBCR 4 : 4 : 4 49 to 56 17 26 VIDEO PROCESSING 57 and 58, 61 to 65, 67 19 27 OTP MEMORY KEYS YCBCR 4 : 2 : 2 ITU656 or ITU656-like Fig 2. DDC-BUS 4 to 11 12 INFORMATION FRAMES AND PACKETS VPA[7:0] I2C-BUS SLAVE HARD RESET NXP Semiconductors VDDC(1V8) VDDD(3V3) 6. Block diagram TDA9983A_SDS_1 Product short data sheet VPP RST_N TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDD(3V3) Conditions Min Max Unit supply voltage (3.3 V) −0.5 +4.6 V VDD(1V8) supply voltage (1.8 V) −0.5 +2.5 V ∆VDD supply voltage difference −0.5 +0.5 V Tstg storage temperature −55 +150 °C Tamb ambient temperature 0 70 °C Tj junction temperature - 125 °C Vesd electrostatic discharge voltage −1500 +1500 V HBM 8. Application information MICROPROCESSOR MASTER MPEG2 DECODER reset TMDS clock digital video (up to 24 bits) TMDS channel 0 TMDS channel 1 sync signals HDMI audio, S/PDIF and I2S-bus TMDS channel 2 TDA9983A hot plug detect IRQ I2C-bus MASTER SLAVE I2C-bus MASTER HDMI RECEIVER/ REPEATER DDC (SCL and SDA) SLAVE E-EDID SLAVE ADDRESS A0 HDMI SOURCE CEC line 001aaf300 Fig 3. Transmitter connection with external world 9. Abbreviations Table 5. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DDC Display Data Channel DVI Digital Visual Interface HDCP High-bandwidth Digital Content Protection HBM Human Body Model HDMI High-Definition Multimedia Interface HPD Hot Plug Detect IRQ Interrupt ReQuest LV-TTL Low-Voltage Transistor-Transistor Logic OTP One-Time Programmable TDA9983A_SDS_1 Product short data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 13 March 2008 6 of 9 TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter Table 5. Abbreviations …continued Acronym Description RGB Red, Green, Blue SHA-1 Secure Hash Algorithm 1 S/PDIF Sony/Philips Digital Interface YCBCR color space originally defined by the ITU-R BT.601 YUV color space used by the NTSC and PAL systems 10. Revision history Table 6. Revision history Document ID Release date Data sheet status Change notice Supersedes TDA9983A_SDS_1 20080313 Product short data sheet - - TDA9983A_SDS_1 Product short data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 13 March 2008 7 of 9 TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter 11. Legal information 11.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 11.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 11.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 11.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. I2C-bus — logo is a trademark of NXP B.V. 12. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] TDA9983A_SDS_1 Product short data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 13 March 2008 8 of 9 TDA9983A NXP Semiconductors 150 MHz pixel rate HDMI transmitter 13. Contents 1 2 3 4 5 5.1 6 7 8 9 10 11 11.1 11.2 11.3 11.4 12 13 General description . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Ordering options . . . . . . . . . . . . . . . . . . . . . . . . Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Application information. . . . . . . . . . . . . . . . . . . Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 3 4 4 5 6 6 6 7 8 8 8 8 8 8 9 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 13 March 2008 Document identifier: TDA9983A_SDS_1