DC/DC Converters TES 2N Series, 2 Watt RoHS compliant Features ◆ Low Profile SMD-Package ◆ Wide 2:1 Input Voltage Range ◆ I/O-Isolation 1500 VDC ◆ Input Filter meets EN55022, Class A ◆ Operating Temperature Range pending -40°C to +71°C ◆ Short-Circuit Protection ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TES-2N series is a family of high performance 2W DC/DC converter modules featuring wide 2:1 input voltage ranges. The 28 models come in a low profile SMD package which requires just 3 cm2 space on the PCB. A high efficiency allows an operating temperature range of –40°C to 71°C without derating. A built-in EMI input filter complies with EN 55022, class A. Typical applications for these converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Ordercode TES 2N-0510 TES 2N-0511 TES 2N-0512 TES 2N-0513 TES 2N-0521 TES 2N-0522 TES 2N-0523 TES 2N-1210 TES 2N-1211 TES 2N-1212 TES 2N-1213 TES 2N-1221 TES 2N-1222 TES 2N-1223 TES 2N-2410 TES 2N-2411 TES 2N-2412 TES 2N-2413 TES 2N-2421 TES 2N-2422 TES 2N-2423 TES 2N-4810 TES 2N-4811 TES 2N-4812 TES 2N-4813 TES 2N-4821 TES 2N-4822 TES 2N-4823 http://www.tracopower.com Input voltage range 4.5 – 9.0 VDC 9 – 18 VDC 18 – 36 VDC 36 – 72 VDC Output voltage Output current max. Efficiency typ. 3.3 VDC 5 VDC 12VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 500 mA 400 mA 165 mA 135 mA ± 200 mA ± 85 mA ± 65 mA 500 mA 400 mA 165 mA 135 mA ± 200 mA ± 85 mA ± 65 mA 500 mA 400 mA 165 mA 135 mA ± 200 mA ± 85 mA ± 65 mA 500 mA 400 mA 165 mA 135 mA ± 200 mA ± 85 mA ± 65 mA 70 % 73 % 75 % 73 % 64 % 69 % 71 % 73 % 77 % 80 % 80 % 73 % 78 % 78 % 72 % 77 % 80 % 81 % 74 % 78 % 80 % 71 % 73 % 79 % 79 % 71 % 77 % 77 % Page 1 of 3 DC/DC Converters TES 2N Series 2 Watt Input Specifications Input current at full load (nominal input) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 600 mA typ. 220 mA typ. 110 mA typ. 55 mA typ. Surge voltage (100 msec. max.) 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 11 V max. 25 V max. 50 V max. 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy Regulation ±2% – Input variation Vin min. to Vin max. ± 0.5 % max. – Load variation 25 – 100 % ± 0.75 % max. dual output models: ± 2.0% (balanced load) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Temperature coefficient ± 0.02 %/K Short circuit protection indefinite, automatic recovery Minimum load 25% of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Capacitive load 3.3 5 12 15 ±5 ± 12 ± 15 VDC VDC VDC VDC VDC VDC VDC output output output output output output output models: 2’200 µF max. models: 1’000 µF max. models: 170 µF max. models: 110 µF max. models: 470 µF max. models: 100 µF max. models: 47 µF max. General Specifications Temperature ranges – Operating – Storage – 40 °C ... + 71 °C (no derating) – 55 °C ... + 125 °C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217 F) > 1.0 Mio h @ 25°C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 250 pF Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency 300 kHz (PFM) General Specifications Case material non conductive FR4 Weight 3.8 g (0.13oz) Reflow soldering profile Peak temp. 245°C (10 sec max.) 217°C for 90 sec. max. Convection reflow solder process is recommended All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 2N Series 2 Watt 0.3 (0.1) 0.6 (0.2) 7.6 (0.30) Outline Dimensions mm (inches) 0.6 (0.2) 23.8 (0.94) 16 9 Pin diameter ø 0.5 ±0.05 (0.02) ±0.002 Tolerances: ±0.25 (0.01) 8 7 1.0 (0.04) 15.24 (0.6) 0.15 18.1 (0.71) 10 1 Pin-Out 13.7 (0.54) Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 No con. No con. 8 No con. Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin +Vin 3.0 2.54 (0.12) (0.1) 19.3 (0.76) 2.4 (0.09) Outline Dimensions mm (inches) 1.6 (0.06) 15.24 (0.6) 2.54 (0.1) Specifications can be changed without notice Rev. 07/05.1 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43311 4511 · Fax +41 43311 4545 · [email protected] · www.tracopower.com Page 3 of 3