DC/DC Converters TES 5 Series, 5 Watt RoHS compliant Features ◆ Compact low Profile SMD Package ◆ Wide 2:1 Input Voltage Range ◆ I/O Isolation 1500VDC ◆ Operating Temp. Range -40°C to 85°C max. ◆ Short Circuit Protection ◆ Remote On/Off ◆ High Accuracy of Pin Co-Planarity ◆ Lead free Design – RoHS compliant ◆ 3 Years Product Warranty UL 60950-1 The TES-5 series is a new range of high performance 5W dc-dc converter modules in low profile SMD package with compact dimensions of only 33.4 x 20.6 x 10.2 mm. The 18 available models feature wide 2:1 input voltage range and tightly regulated output voltage. High efficiency allows operating temperatures up to 71°C at full load. Further features are built-in EMI-filter to meet EN 55022,class A and FCC, level A without additional components and remote On/Off control. The products are qualified for soldering in a high temperature lead-free reflow solder process. Typical applications for these converters are battery powered equipment, instrumentation, communication systems and industrial controls. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 5-1210 3.3 VDC 1200 mA 76 % TES 5-1211 5 VDC 1000 mA 80 % 12 VDC 420 mA 83 % 15 VDC 335 mA 83 % TES 5-1212 TES 5-1213 TES 5-1221 9 – 18 VDC (12 VDC nominal) ± 5 VDC ± 500 mA 80 % TES 5-1222 ± 12 VDC ± 210 mA 83 % TES 5-1223 ± 15 VDC ± 165 mA 83 % TES 5-2410 3.3 VDC 1200 mA 78 % TES 5-2411 5 VDC 1000 mA 82 % 12 VDC 420 mA 85 % 15 VDC 335 mA 85 % TES 5-2412 TES 5-2413 TES 5-2421 18 – 36 VDC (24 VDC nominal) ± 5 VDC ± 500 mA 82 % TES 5-2422 ± 12 VDC ± 210 mA 85 % TES 5-2423 ± 15 VDC ± 165 mA 85 % TES 5-4810 3.3 VDC 1200 mA 78 % TES 5-4811 5 VDC 1000 mA 82 % TES 5-4812 12 VDC 420 mA 85 % TES 5-4813 TES 5-4821 36 – 75 VDC (48 VDC nominal) 15 VDC 335 mA 85 % ± 5 VDC ± 500 mA 82 % TES 5-4822 ± 12 VDC ± 210 mA 85 % TES 5-4823 ± 15 VDC ± 165 mA 85 % http://www.tracopower.com Page of 3 DC/DC Converters TES 5 Series 5 Watt Input Specifications Input current no load 12 Vin models 20 mA 24 Vin models 5 mA 48 Vin models 3 mA Input current full load 12 Vin models 500 mA typ. 24 Vin models 250 mA typ. 48 Vin models 125 mA typ. Start-up voltage / under voltage shut down 12 Vin models 8 VDC / 7 VDC typ. 24 Vin models 16 VDC / 15 VDC typ. 48 Vin models 33 VDC / 31 VDC typ. Surge voltage (1 sec. max.) 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, class A Output Specifications Voltage set accuracy ± 1 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 20 – 100 % single output models 1 % max. dual output models balanced load 2 % max. Ripple and noise (20 MHz Bandwidth) 85 mVpk-pk max. Temperature coefficient ± 0.02 % / °C Output current limitation >115 % of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load single output models 680 µF max. dual output models 100 µF max. (esch output) General Specifications Temperature ranges – Operating – 40°C ... + 85 °C – Case temperature + 100°C max. – Storage – 40°C ... + 125 °C Derating 3.5%/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F ground benign) >1 Mio. h @ + 25 °C Isolation voltage (60sec.) – Input/Output 1’500 VDC Isolation capacity – Input/Output 650 pF typ. Isolation resistance – Input/Output (500 VDC) >1‘000 MOhm Switching frequency 260 kHz typ. Safety standards UL 60950-1 , IEC 60950-1, EN 60950-1 Safety approvals CSA (pending) Remote On/Off – On: 2.5 ... 5.5 VDC or open circuit – Off: -0.7 ... 0.8 VDC or short circuit pin 1 and 2(/3) – Off idle current: 10 mA All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page of 3 DC/DC Converters TES 5 Series 5 Watt Physical Specifications Case material non conductive plastic Potting material epoxy (UL 94V-0 rated) Weight 14 g (0.55 oz) Reflow soldering profile as per �IPC/JEDEC J-STD-020C peak temp. 245°C (+0°C) for 20sec. max. Outline Dimensions 33.4 (1.31) Pin-Out Detail A Seating Plane Pin 1 0.4 (0.016) (0.40) 10.2 S –Vin (GND) Common 22.6 (0.89) 10 No con. No con. 11 No con. –Vout 12 No con. No con. 13 No con. No con. 14 +Vout +Vout 15 No con. No con. 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 24 No con. No con. 5 1. 6) .0 (0 15.24 2.54 (0.11) (0.6) (0.1) (0.06) 27.0 (1.06) 3 x 2.54 (0.6) (3 x 0.1) (0.006) 2.7 1.5 0.15 12 15.24 –Vin (GND) No con. 0.15 2 x 2.54 –Vin (GND) –Vin (GND) Top View (2 x 0.1) 2 9 Detail A Pin Patterns: Remote On/Off Remote On/Off 3 13 1 Dual 20.6 (0.81) 25.6 (1.01) 24 Single Dimensions in [mm], () = Inch Tolerances ±0.25 (0.02) Pin pich tolerances ±0.13 (0.005) 2.7 (0.11) 3.0 (0.12) 1.9 (0.059) Specifications can be changed any time without notice Rev. 02/07 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page of 3