TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 FEATURES • • • Very Low Dropout Voltage, Less Than 0.6 V at 750 mA Low Quiescent Current TTL- and CMOS-Compatible Enable on TL751M Series • • • • 60-V Load-Dump Protection Overvoltage Protection Internal Thermal-Overload Protection Internal Overcurrent-Limiting Circuitry (1) TL750M...KC PACKAGE (TOP VIEW) TL750M...KTP PACKAGE (TOP VIEW) COMMON OUTPUT COMMON INPUT OUTPUT COMMON INPUT TL750M...KTT PACKAGE(1) (TOP VIEW) COMMON TL750M...KTE PACKAGE(1) (TOP VIEW) (1) OUTPUT COMMON INPUT TL751M...KTG PACKAGE (TOP VIEW) OUTPUT COMMON INPUT (1) NC OUTPUT COMMON INPUT ENABLE NC - No inter nal connection (1) The common terminal is in electrical contact with the mounting base. DESCRIPTION/ORDERING INFORMATION The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for battery-powered systems. The TL750M and TL751M series incorporate onboard overvoltage and current-limiting protection circuitry to protect the devices and the regulated system. Both series are fully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current, even during full-load conditions, makes the TL750M and TL751M series ideal for standby power systems. The TL750M and TL751M series offers 5-V, 8-V, 10-V, and 12-V options. The TL751M series has the addition of an enable (ENABLE) input. The ENABLE input gives the designer complete control over power up, allowing sequential power up or emergency shutdown. When ENABLE is high, the regulator output is placed in the high-impedance state. The ENABLE input is TTL and CMOS compatible. The TL750MxxC and TL751MxxC are characterized for operation over the virtual junction temperature range 0°C to 125°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerFLEX is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1988–2006, Texas Instruments Incorporated TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 ORDERING INFORMATION TJ 5V 0°C to 125°C (1) (2) PACKAGE (1) VO TYP ORDERABLE PART NUMBER (2) TOP-SIDE MARKING PowerFLEX™ – KTE Reel of 2000 TL750M05CKTER TL750M05C PowerFLEX – KTG Reel of 2000 TL751M05CKTGR TL751M05C PowerFLEX – KTP Reel of 3000 TL750M05CKTPR 750M05C TO-220 – KC Tube of 50 TL750M05CKC TL750M05C TO-263 – KTT Reel of 500 TL750M05CKTTR TL750M05C 10 V TO-220 – KC Tube of 50 TL750M10CKC TL750M10C 12 V TO-220 – KC Tube of 50 TL750M12CKC TL750M12C Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. For the most current ordering information, see the Package Option Addendum at the end of this data sheet. TL751Mxx FUNCTIONAL BLOCK DIAGRAM INPUT ENABLE Current Limiting Enable 28 V _ + Bandgap OUTPUT Overvoltage/ Thermal Shutdown COMMON DEVICE COMPONENT COUNT 2 Transistors 46 Diodes 14 Resistors 44 Capacitors 4 JFETs 1 Tunnels (emitter R) 2 Submit Documentation Feedback TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 Absolute Maximum Ratings (1) over virtual junction temperature range (unless otherwise noted) MIN V Transient input voltage (see Figure 3) 60 V –15 V –50 V Transient reverse input voltage t = 100 ms Package thermal impedance (2) (3) KC package 22 KTE package 23 KTG package 23 KTP package 28 KTT package TJ (1) (2) (3) °C/W 25.3 Virtual junction temperature range 0 Lead temperature Tstg UNIT 26 Continuous reverse input voltage θJA MAX Continuous input voltage 1,6 mm (1/16 in) from case for 10 s Storage temperature range –65 150 °C 260 °C 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Due to variation in individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power levels slightly above or below the rated dissipation. The package thermal impedance is calculated in accordance with JESD 51. Recommended Operating Conditions MIN MAX 6 26 TL75xM08 9 26 TL75xM10 11 26 TL75xM05 VI Input voltage TL75xM12 13 26 VIH High-level ENABLE input voltage TL751Mxx 2 15 VIL Low-level ENABLE input voltage TL751Mxx 0 IO Output current TL75xMxxC TJ Operating virtual junction temperature TL75xMxxC 0 UNIT V V 0.8 V 750 mA 125 °C TL751MxxC Switching Characteristics VI = 14 V, IO = 300 mA, TJ = 25°C (unless otherwise noted) PARAMETER tr Response time, ENABLE to output TL751MxxC TYP 50 Submit Documentation Feedback UNIT µs 3 TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 TL75xM05C Electrical Characteristics (1) VI = 14 V, IO = 300 mA, ENABLE = 0 V for TL751M05, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TJ = 0°C to 125°C (1) 4.95 5 5.05 5.1 25 VI = 6 V to 26 V, IO = 250 mA 12 50 IO = 5 mA to 750 mA Bias current (TL751Mxx only) MAX 10 VI = 8 V to 18 V, f = 120 Hz Bias current TYP VI = 9 V to 16 V, IO = 250 mA Output regulation voltage Output noise voltage UNIT MIN 4.9 Ripple rejection Dropout voltage TL750M05C TL751M05C TEST CONDITIONS 50 55 20 0.5 IO = 750 mA 0.6 60 IO = 10 mA 75 5 ENABLE ≥ 2 V mV V µV 500 IO = 750 mA mV dB 50 IO = 500 mA f = 10 Hz to 100 kHz V 200 mA µA Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 10-µF tantalum capacitor on the output, with equivalent series resistance within the guidelines shown in Figure 1. TL75xM08C Electrical Characteristics (1) VI = 14 V, IO = 300 mA, ENABLE = 0 V for TL751M08, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input voltage regulation (1) MAX 7.92 8 8.08 8.16 12 40 VI = 9 V to 26 V, IO = 250 mA 15 68 IO = 5 mA to 750 mA Bias current (TL751Mxx only) TYP VI = 10 V to 17 V, IO = 250 mA VI = 11 V to 21 V, f = 120 Hz Bias current UNIT MIN 7.84 Output regulation voltage Output noise voltage 4 TJ = 0°C to 125°C Ripple rejection Dropout voltage TL750M08C TL751M08C TEST CONDITIONS 50 55 24 0.5 IO = 750 mA 0.6 IO = 750 mA IO = 10 mA 75 5 ENABLE ≥ 2 V mV V µV 500 60 mV dB 80 IO = 500 mA f = 10 Hz to 100 kHz V 200 mA µA Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 10-µF tantalum capacitor on the output, with equivalent series resistance within the guidelines shown in Figure 1. Submit Documentation Feedback TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 TL75xM10C Electrical Characteristics (1) VI = 14 V, IO = 300 mA, ENABLE = 0 V for TL751M10, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TJ = 0°C to 125°C (1) 9.9 10 10.1 10.2 43 VI = 11 V to 26 V, IO = 250 mA 20 75 IO = 5 mA to 750 mA Bias current (TL751Mxx only) MAX 15 VI = 13 V to 23 V, f = 120 Hz Bias current TYP VI = 12 V to 18 V, IO = 250 mA Output regulation voltage Output noise voltage UNIT MIN 9.8 Ripple rejection Dropout voltage TL750M10C TL751M10C TEST CONDITIONS 50 55 30 0.5 IO = 750 mA 0.6 60 IO = 10 mA 75 5 ENABLE ≥ 2 V mV V µV 1000 IO = 750 mA mV dB 100 IO = 500 mA f = 10 Hz to 100 kHz V 200 mA µA Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 10-µF tantalum capacitor on the output, with equivalent series resistance within the guidelines shown in Figure 1. TL75xM12C Electrical Characteristics (1) VI = 14 V, IO = 300 mA, ENABLE = 0 V for TL751M12, TJ = 25°C (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TJ = 0°C to 125°C (1) 11.88 12 12.12 12.24 15 43 20 78 IO = 5 mA to 750 mA Bias current (TL751Mxx only) MAX VI = 13 V to 26 V, IO = 250 mA VI = 13 V to 23 V, f = 120 Hz Bias current TYP VI = 14 V to 19 V, IO = 250 mA Output regulation voltage Output noise voltage UNIT MIN 11.76 Ripple rejection Dropout voltage TL750M12C TL751M12C TEST CONDITIONS 50 55 30 0.5 IO = 750 mA 0.6 IO = 750 mA IO = 10 mA 75 5 ENABLE ≥ 2 V mV V µV 1000 60 mV dB 120 IO = 500 mA f = 10 Hz to 100 kHz V 200 mA µA Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1-µF capacitor across the input and a 10-µF tantalum capacitor on the output, with equivalent series resistance within the guidelines shown in Figure 1. Submit Documentation Feedback 5 TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 PARAMETER MEASUREMENT INFORMATION The TL750Mxx is a low-dropout regulator. This means that the capacitance loading is important to the performance of the regulator because it is a vital part of the control loop. The capacitor value and the equivalent series resistance (ESR) both affect the control loop and must be defined for the load range and the temperature range. Figure 1 and Figure 2 can establish the capacitance value and ESR range for the best regulator performance. Figure 1 shows the recommended range of ESR for a given load with a 10-µF capacitor on the output. This figure also shows a maximum ESR limit of 2 Ω and a load-dependent minimum ESR limit. For applications with varying loads, the lightest load condition should be chosen because it is the worst case. Figure 2 shows the relationship of the reciprocal of ESR to the square root of the capacitance with a minimum capacitance limit of 10 µF and a maximum ESR limit of 2 Ω. This figure establishes the amount that the minimum ESR limit shown in Figure 1 can be adjusted for different capacitor values. For example, where the minimum load needed is 200 mA, Figure 1 suggests an ESR range of 0.8 Ω to 2 Ω for 10 µF. Figure 2 shows that changing the capacitor from 10 µF to 400 µF can change the ESR minimum by greater than 3/0.5 (or 6). Therefore, the new minimum ESR value is 0.8/6 (or 0.13 Ω ). This allows an ESR range of 0.13 Ω to 2 Ω , achieving an expanded ESR range by using a larger capacitor at the output. For better stability in low-current applications, a small resistance placed in series with the capacitor (see Table 1) is recommended, so that ESRs better approximate those shown in Figure 1 and Figure 2. Table 1. Compensation for Increased Stability at Low Currents MANUFACTURER CAPACITANCE ESR TYP PART NUMBER ADDITIONAL RESISTANCE 15 µF 0.9 Ω TAJB156M010S 1Ω <br/> AVX ∆IL Applied Load Current Load Voltage <br/> <br/> 33 µF KEMET 0.6 Ω 0.5 Ω T491D336M010AS ∆VL = ∆IL × ESR ∆VL <br/> OUTPUT CAPACITOR EQUIVALENT SERIES RESISTANCE (ESR) vs LOAD CURRENT RANGE <br/> STABILITY vs EQUIVALENT SERIES RESISTANCE (ESR) 0.04 3 CL = 10 µF CI = 0.1 µF f = 120 Hz ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏ ÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏÏÏ ÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏÏÏ ÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ 2.6 2.4 0.03 Max ESR Boundary 1.8 1.6 Region of Best Stability 1.4 1.2 CL 2.2 2 Not Recommended Recommended Min ESR Potential Instability 0.035 This Region Not Recommended for Operation Stability − Equivalent Series Resistance (ESR) − Ω 2.8 Min ESR Boundary 0.6 0.4 Potential Instability Region 0.2 0 0 0.1 0.2 0.3 0.4 IL − Load Current Range − A 0.5 400 µF 0.02 200 µF 0.015 100 µF 0.01 0.005 0 0 Figure 1. 6 1000 µF Region of Best Stability 0.025 1 0.8 ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏ ÏÏÏ ÏÏÏ 22 µF 10 µF 0.5 1 1.5 2 2.5 1/ESR Figure 2. Submit Documentation Feedback 3 3.5 4 4.5 5 TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 TYPICAL CHARACTERISTICS Table of Graphs FIGURE Transient input voltage vs Time 3 Output voltage vs Input voltage Input current vs Input voltage 4 IO = 10 mA 5 IO = 100 mA 6 Dropout voltage vs Output current 7 Quiescent voltage vs Output current 8 Load transient response 9 Line transient response 10 TRANSIENT INPUT VOLTAGE vs TIME OUTPUT VOLTAGE vs INPUT VOLTAGE 14 TJ = 25°C VI = 14 V + 46e(−t/0.230) for t ≥ 5 ms 50 IO = 10 mA TJ = 25°C 12 VO − Output Voltage − V V I − Transient Input Voltage − V 60 40 30 tr = 1 ms 20 10 TL75xM12 10 TL75xM10 8 TL75xM08 6 TL75xM05 4 2 0 0 100 200 300 400 500 600 0 0 2 4 6 8 10 t − Time − ms VI − Input Voltage − V Figure 3. Figure 4. Submit Documentation Feedback 12 14 7 TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 INPUT CURRENT vs INPUT VOLTAGE INPUT CURRENT vs INPUT VOLTAGE 200 350 IO = 10 mA TJ = 25°C 180 IO = 100 mA TJ = 25°C 300 TL75_M10 40 TL75_M08 60 TL75_M12 150 TL75_M12 80 200 TL75_M10 100 TL75_M08 120 250 TL75_M05 I I − Input Current − mA 140 TL75_M05 I I − Input Current − mA 160 100 50 20 0 0 2 4 6 8 10 12 0 14 0 2 4 6 8 10 VI − Input Voltage − V VI − Input Voltage − V Figure 5. Figure 6. DROPOUT VOLTAGE vs OUTPUT CURRENT QUIESCENT CURRENT vs OUTPUT CURRENT 250 12 14 250 350 12 TJ = 25°C TJ = 25°C VI = 14 V 225 IQ − Quiescent Current − mA Dropout Voltage − mV 10 200 175 150 125 100 8 6 4 2 75 50 0 50 100 150 200 250 300 0 0 IO − Output Current − mA 40 60 80 100 150 IO − Output Current − mA Figure 7. 8 20 Figure 8. Submit Documentation Feedback TL750M SERIES, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS www.ti.com SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006 VO − Output Voltage − mV 20 mV/DIV LINE TRANSIENT RESPONSE 200 100 0 − 100 − 200 150 VI(NOM) = VO + 1 V ESR = 2 CL = 10 µF TJ = 25°C 100 50 0 0 50 100 150 200 t − Time − µs VI(NOM) = VO + 1 V ESR = 2 IL = 20 mA CL = 10 µF TJ = 25°C VIN − Input Voltage − V 1 V/DIV IO − Output Current − mA VO − Output Voltage − mV LOAD TRANSIENT RESPONSE 250 300 350 0 20 40 60 80 100 150 250 350 t − Time − µs Figure 9. Figure 10. Submit Documentation Feedback 9 PACKAGE OPTION ADDENDUM www.ti.com 15-Jan-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL750M05CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M05CKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M05CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M05CKTER NRND PFM KTE 3 2000 TBD CU SNPB Level-1-220C-UNLIM TL750M05CKTPR NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TL750M05CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TL750M05CKTTR ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) CU SN Level-3-245C-168 HR TL750M05CKTTRG3 ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) CU SN Level-3-245C-168 HR TL750M05CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TL750M08CKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M08CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M08CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TL750M08CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TL750M10CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M10CKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M10CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M10CKTER NRND PFM KTE 3 2000 TBD CU SNPB Level-1-220C-UNLIM TL750M10CKTPR NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TL750M10CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TL750M10CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TL750M12CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M12CKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M12CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750M12CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM TL750M12CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TL751M05CKTGR OBSOLETE PFM KTG 5 Call TI Call TI Addendum-Page 1 TBD Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 15-Jan-2007 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001 KTE (R-PSFM-G3) PowerFLEX PLASTIC FLANGE-MOUNT 0.375 (9,52) 0.080 (2,03) 0.070 (1,78) 0.365 (9,27) 0.360 (9,14) 0.050 (1,27) 0.040 (1,02) 0.350 (8,89) 0.220 (5,59) NOM 0.010 (0,25) NOM Thermal Tab (See Note C) 0.360 (9,14) 0.350 (8,89) 0.295 (7,49) NOM 0.320 (8,13) 0.310 (7,87) 0.420 (10,67) 0.410 (10,41) 1 3 0.025 (0,63) 0.031 (0,79) 0.100 (2,54) Seating Plane 0.004 (0,10) 0.010 (0,25) M 0.005 (0,13) 0.001 (0,03) 0.200 (5,08) 0.041 (1,04) 0.031 (0,79) 0.010 (0,25) NOM Gage Plane 3°– 6° 0.010 (0,25) 4073375/F 12/00 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. The center lead is in electrical contact with the thermal tab. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). Falls within JEDEC MO-169 PowerFLEX is a trademark of Texas Instruments. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MPFM003F – OCTOBER 1994 – REVISED MARCH 2002 KTG (R-PSFM-G5) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE 0.375 (9,52) 0.365 (9,27) 0.080 (2,03) 0.070 (1,78) 0.360 (9,14) 0.350 (8,89) 0.050 (1,27) 0.040 (1,02) 0.220 (5,59) NOM 0.010 (0,25) NOM 0.360 (9,14) 0.350 (8,89) 0.295 (7,49) NOM 0.320 (8,13) 0.310 (7,87) 0.420 (10,67) Thermal Tab (See Note C) 0.410 (10,41) 1 0.067 (1,70) 5 Seating Plane 0.031 (0,79) 0.004 (0,10) 0.025 (0,63) 0.268 (6,81) 0.010 (0,25) M 0.005 (0,13) 0.001 (0,03) 0.041 (1,04) 0.010 (0,25) NOM 0.031 (0,79) Gage Plane 3°–ā6° 0.010 (0,25) 4073377/G 12/00 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. The center lead is in electrical contact with the thermal tab. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). FAlls within JEDEC MO–169 PowerFLEX is a trademark of Texas Instruments. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MPSF001F – JANUARY 1996 – REVISED JANUARY 2002 KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE 0.080 (2,03) 0.070 (1,78) 0.243 (6,17) 0.233 (5,91) 0.228 (5,79) 0.218 (5,54) 0.050 (1,27) 0.040 (1,02) 0.010 (0,25) NOM 0.130 (3,30) NOM 0.215 (5,46) NOM 0.247 (6,27) 0.237 (6,02) Thermal Tab (See Note C) 0.287 (7,29) 0.277 (7,03) 0.381 (9,68) 0.371 (9,42) 0.100 (2,54) 0.090 (2,29) 0.032 (0,81) MAX Seating Plane 0.090 (2,29) 0.180 (4,57) 0.004 (0,10) 0.005 (0,13) 0.001 (0,02) 0.031 (0,79) 0.025 (0,63) 0.010 (0,25) M 0.010 (0,25) NOM Gage Plane 0.047 (1,19) 0.037 (0,94) 0.010 (0,25) 2°–ā6° 4073388/M 01/02 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. The center lead is in electrical contact with the thermal tab. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). Falls within JEDEC TO-252 variation AC. PowerFLEX is a trademark of Texas Instruments. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated