EXTERNAL TR100 Series 1 0 0 W AT T S S I N G L E O U T P U T A C / D C G E N E R A L Features • • • • • • Wide input voltage 90VAC to 264VAC, 50/60Hz Continuous short circuit protection Output voltage available from 12VDC to 48VDC High efficiency 85% typical Meets EN55022 Class ”B”, conducted emissions MEPS compliance Specifications STANDARDS AND APPROVALS INPUT Voltage range 90 to 264Vac Frequency 47Hz to 63Hz Inrush current 100A max @ 264Vac Isolation Input to Output 4242Vdc Leakage current 1.5mA max. OUTPUT Safety standards NSW office of Fair Trading Certificate of approval NSW19568, EN60950, IEC60950, AS/NZS60950 C-tick AS/NZS CISPR 11:2002 Group 1, EMI standards Class B; Meets EN55022 class “B”, conducted RCM Complies with AS/NZS 4417 Parts 1,2,3 MECHANICAL Dimensions 70x150x35mm AC Inlet IEC320/C14 Output connector Right angle, hollow coaxial plug, 2.5mm inside diameter; 5.5mm, outside diameter; 9.5mm length center positive polarity. DC cord length 720mm with ferrite core 18AWG/UL1185 Output voltage Factory preset, see table (not adjustable) Voltage set-point +/-2% (60% load) Ripple and noise 1% p-p max Short circuit protection Continuous (Auto recovery) Over voltage protection Option Hold-up time 20ms typ @ 115Vac Selection Table Load regulation +/-2 to +/-4% (20 to 100% load) Line regulation +/-1% max at full load MODEL NUMBER ENVIRONMENTAL Operating temperature 0°C to +40°C Storage temperature -20°C to +85°C Technical Illustration RATED Vnom OUTPUTCUR RENT MAX POWER TR100A120-21A11 12Vdc 8.3A 100W TR100A150-21A11 15Vdc 6.67A 100W TR100A180-21A11 18Vdc 5.56A 100W TR100A190-21A11 19Vdc 5.21A 99W TR100A240-21A11 24Vdc 4.17A 100W TR100A280-21A11 28Vdc 3.54A 99W TR100A290-21A11 29Vdc 3.41A 99W TR100A300-21A11 30Vdc 3.3A 99W TR100A360-21A11 36Vdc 2.78A 100W TR100A480-21A11 48Vdc 2.08A 99W Note: MEPS compliance model number change to eg. TRG100A12-21A11. Available, OCT 2007. 260