OPEN FRAME & ENCLOSED PBNH Series 80W MOBILE CONVERTERS Features • • • • • • Easy to mount and terminate Input/output fully isolated Short circuit protected Thermal protected Low noise High surge currents Specifications MECHANICAL INPUT Input Voltage 12VDC (10–16) 24VDC (18–32) 36VDC (30–48) 48VDC (40–64) 110VDC (72–140) Output Voltage See selection table Output Current See selection table Output Voltage Adjustment 10% internal pot Output Power Typically 80W continuous, 110 intermittent Noise Below CISPR limit Ripple & Noise Typically 10mV rms at nominal load and input voltage Load Regulation 5% at nominal input voltage Line Regulation 5% over input range OPERATING Input and output are electrically isolated from chassis and input is isolated from output Isolation voltage – 1000VDC Switching Frequency Approx. 50kHz Efficiency Typically 80%-85% Protection Reverse input polarity Transorb diode at input Overvoltage protection Short circuit protection Thermal protection Unit will switch off automatically at input over- or undervoltage protection ENVIRONMENTAL Operating Temperature 110 Input and output have 6.3mm push on spade terminals Dimensions 135x119x46mm Weight 0.6kg STANDARDS AND APPROVALS OUTPUT Isolation Terminals -20°C to 40°C at full load derate linearly to 60°C C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN50082-1 EMI standards EN50081-1 Selection Table MODEL NUMBER INPUT DC OUTPUT OUT I (PK) PBNH-1212L 12V 13.2V 3.0A 4.0A PBNH-1224L 12V 24V 1.7A 2.2A PBNH-1248L 12V 48V 0.7A 0.8A PBNH-2412L 24V 13.2V 6.0A 10.0A PBNH-2424L 24V 24V 3.0A 4.0A PBNH-2436L 24V 36V 2.5A 3.0A PBNH-2448L 24V 48V 1.5A 2.0A PBNH-3612L 36V 13.2V 6.0A 8.0A PBNH-3624L 36V 24V 3.0A 4.0A PBNH-4812L 48V 13.2V 6.0A 8.0A PBNH-4824L 48V 24V 3.0A 4.0A PBNH-4848L 48V 48V 1.5A 2.0A PBNH-8012L 110V 13.2V 6.0A 8.0A PBNH-8024L 110V 24V 3.0A 4.0A