STMICROELECTRONICS TS524_01

TS524
PRECISION LOW NOISE
QUAD OPERATIONAL AMPLIFIER
■ LOW INPUT OFFSET VOLTAGE 950µV max.
■ LOW VOLTAGE NOISE : 4.5nV/√Hz
■ HIGH GAIN BANDWIDTH PRODUCT :
■
■
■
■
15MHz
HIGH SLEW RATE : 7V/µs
LOW DISTORTION : 0.002%
ESD INTERNAL PROTECTION 2kV
MACROMODEL INCLUDED IN THIS SPECI
FICATION
N
DIP14
(Plastic Package)
DESCRIPTION
The TS524 is a monolithic quad operational amplifier particularly well-suited for audio applications.
The TS524 offers a very low input offset voltage
as well as low voltage noise (4.5nV/√Hz) and high
dynamic performances (15MHz gain bandwidth
product, 7V/µs slew rate).
The output stage allows a large output voltage
swing and symmetrical source and sink currents.
D
SO14
(Plastic Micropackage)
ORDER CODE
Package
Part Number Temperature Range
TS524I
-40°C, +125°C
N
D
•
•
N = Dual in Line Package (DIP)
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
PIN CONNECTIONS (top view)
14 Output 4
Output 1 1
Inverting Input 1 2
-
-
13 Inverting Input 4
Non-inverting Input 1 3
+
+
12 Non-inverting Input 4
11 VCC -
VCC + 4
Non-inverting Input 2
5
+
+
10 Non-inverting Input 3
Inverting Input 2
6
-
-
9
Inverting Input 3
8
Output 3
Output 2 7
October 2001
1/8
TS524
SCHEMATIC DIAGRAM (1/4 TS524)
VCC
Output
Non-inverting
Input
Inverting
Input
VCC
ABSOLUTE MAXIMUM RATINGS
Symbol
VCC
Parameter
Supply Voltage
1)
Vid
Differential Input Voltage
Vi
Input Voltage (see note 1)
Output Short-circuit Duration
Toper
Tj
1.
2.
2)
Operating Free-Air Temperature Range
Maximum Junction Temperature
Tstg
Storage Temperature Range
ptot
Maximum Power Dissipation (see note 2)
Value
Unit
±18 to 36
V
±30
V
±15
V
Infinite
-40 to +105
°C
+ 150
°C
-65 to +150
°C
500
mW
Value
Unit
±2.5 to ±15
V
Either or both input voltages must not exceed the magnitude of VCC+ or VCCPower dissipation must be considered to ensure maximum junction temperature (T j) is not exceeded
OPERATING CONDITIONS
Symbol
VCC
2/8
Parameter
Supply Voltage
TS524
ELECTRICAL CHARACTERISTICS
VCC+ = 15V, V cc- = -15V, Tamb = 25°C (unless otherwise specified)
Symbol
Vio
∆Vio
Parameter
Min.
Typ.
Input Offset Voltage (Vo = 0V, Vic = 0V)
Tmin ≤ Tamb ≤ Tmax
Max.
Unit
0.95
1.8
mV
µV/°C
Input Offset Voltage Drift
Vic = 0V, Vo = 0V, Tmin ≤ Tamb ≤ Tmax
2
Iio
Input Offset Current (Vic = 0V, Vo = 0V)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
10
150
175
nA
Iib
Input Bias Current (Vic = 0V, Vo = 0V)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
250
750
800
nA
Vicm
Avd
Common Mode Input Voltage Range (∆Vio = 5mV, Vo = 0V)
Large Signal Voltage Gain (RL = 2kΩ, Vo = ±10V
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
±13
±14
90
85
100
V
dB
Output Voltage Swing (Vid = ±1V)
V
RL = 600Ω
RL = 600Ω
±Vopp
CMR
SVR
Io
Icc
SR
GBP
B
Am
∅m
12.2
-12.7
RL = 2.0kΩ
RL = 2.0kΩ
13.2
RL = 10kΩ
RL =10kΩ
13.5
Common Mode Rejection Ratio (Vic = ±13V)
Supply Voltage Rejection Ratio
Vcc+/Vcc- = +15V/-15V to +5V/-5V
Output Short Circuit Current (Vid = ±1V, Output to ground)
Source
Sink
Supply Current (Vo = 0V, All amplifiers)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
80
14
-14.2
-13.2
14.3
-14.6
-14
100
dB
dB
80
105
15
20
29
37
mA
mA
8
10
12
Slew Rate (Vi = -10V to +10V, RL = 2kΩ, CL = 100pF, AV = +1)
5
7
V/µs
Gain Bandwith Product (f = 100kHz, RL = 2kΩ, CL = 100pF)
10
15
MHz
9
MHz
CL = 0pF
CL = 100pF
-11
-6
dB
CL = 0pF
CL = 100pF
55
30
Degrees
Unity Gain Bandwith (Open loop)
Gain Margin (RL = 2kΩ)
Phase Margin
en
Equivalent Input Noise Voltage (Rs = 100Ω, f = 1kHz)
4.5
nV
-----------Hz
in
Equivalent Input Noise current (f = 1kHz)
0.5
pA
-----------Hz
0.002
Vo1/Vo2
Total Harmonic Distortion
RL = 2kΩ, f = 20Hz to 20kHz, Vo = 3Vrms , Av = +1
Channel Separation (f = 20Hz to 20kHz)
120
dB
FPB
Full Power Bandwith (Vo = 27Vpp, RL = 2kΩ, THD ≤ 1%)
120
kHz
THD
%
Zo
Output Impedance (Vo = 0V, f = 9MHz)
37
Ω
Ri
Input Resistance (Vic = 0V)
175
kΩ
Ci
Input Capacitance (Vic = 0V)
12
pF
3/8
TS524
MACROMODEL
** Standard Linear Ics Macromodels, 1993.
** CONNECTIONS :
* 1 INVERTING INPUT
* 2 NON-INVERTING INPUT
* 3 OUTPUT
* 4 POSITIVE POWER SUPPLY
* 5 NEGATIVE POWER SUPPLY
.SUBCKT TS524 1 3 2 4 5 (analog)
********************************************************
.MODEL MDTH D IS=1E-8 KF=2.286238E-16
CJO=10F
* INPUT STAGE
CIP 2 5 1.200000E-11
CIN 1 5 1.200000E-11
EIP 10 5 2 5 1
EIN 16 5 1 5 1
RIP 10 11 2.363636E+00
RIN 15 16 2.363636E+00
RIS 11 15 1.224040E+01
DIP 11 12 MDTH 400E-12
DIN 15 14 MDTH 400E-12
VOFP 12 13 DC 0
VOFN 13 14 DC 0
IPOL 13 5 1.100000E-04
CPS 11 15 2.35E-09
DINN 17 13 MDTH 400E-12
VIN 17 5 1.000000e+00
DINR 15 18 MDTH 400E-12
VIP 4 18 1.000000E+00
FCP 4 5 VOFP 1.718182E+01
FCN 5 4 VOFN 1.718182E+01
FIBP 2 5 VOFN 4.545455E-03
FIBN 5 1 VOFP 4.545455E-03
* AMPLIFYING STAGE
FIP 5 19 VOFP 9.545455E+02
FIN 5 19 VOFN 9.545455E+02
CC 19 29 1.500000E-08
HZTP 30 29 VOFP 1.523529E+02
HZTN 5 30 VOFN 1.523529E+02
DOPM 51 22 MDTH 400E-12
DONM 21 52 MDTH 400E-12
HOPM 22 28 VOUT 5.172414E+03
VIPM 28 4 1.500000E+02
HONM 21 27 VOUT 4.054054E+03
VINM 5 27 1.500000E+02
DBIDON1 19 53 MDTH 400E-12
V1 51 53 0.68
DBIDON2 54 19 MDTH 400E-12
V2 54 52 0.68
RG11 51 5 3.04E+05
RG12 51 4 3.04E+05
RG21 52 5 0.6072E+05
RG22 52 4 0.6072E+05
E1 50 40 51 0 1 E2 40 39 52 0 1
EDEC1 38 39 4 0 0.5
EDEC2 0 38 5 0 0.5
DOP 51 25 MDTH 400E-12
VOP 4 25 1.474575E+00
DON 24 52 MDTH 400E-12
VON 24 5 1.474575E+00
RAJUS 50 5 1E12
GCOMP 5 4 4 5 8.1566068E-04
RPM1 5 80 1E+06
RPM2 4 80 1E+06
GAVPH 5 82 50 80 3.26E-03
RAVPHGH 82 4 613
RAVPHGB 82 5 613
RAVPHDH 82 83 1000
RAVPHDB 82 84 1000
CAVPHH 4 83 0.159E-09
CAVPHB 5 84 0.159E-09
EOUT 26 23 82 5 1
VOUT 23 5 0
ROUT 26 3 4.780354E+01
COUT 3 5 1.000000E-12
.ENDS
ELECTRICAL CHARACTERISTICS
Vcc = ±15V, Tamb = 25°C (unless otherwise specified)
Symbol
Conditions
Vio
Unit
0
mV
Avd
RL = 2kΩ, Vo = ±10V
100
dB
Icc
No load, per operator
2
mA
Vicm
∆Vio = 5mV, Vo = 0V
Vopp
RL = 2kΩ
Isink
Isource
28
V
28.2
V
Vo = 0V
37
mA
Vo = 0V
29
mA
RL = 2kΩ, CL = 100pF
15
MHz
SR
RL = 2kΩ, CL = 100pF, AV = +1
7
V/µs
∅m
RL = 2kΩ, CL = 0pF
55
Degrees
GBP
4/8
Value
TS524
TOTAL SUPPLY CURRENT vs SUPPLY
VOLTAGE
OUTPUT SHORT CIRCUIT CURRENT vs
OUTPUT VOLTAGE
OUTPUT VOLTAGE vs SUPPLY VOLTAGE
OUTPUT VOLTAGE vs SUPPLY VOLTAGE
15
Output Voltage (V)
10
5
Vid=±1V
RL=600Ω
0
-5
-10
-15
0
5
10
15
Supply Voltage (V)
EQUIVALENT INPUT NOISE VOLTAGE vs
FREQUENCY
THD + NOISE vs FREQUENCY
5/8
TS524
VOLTAGE GAIN AND PHASE vs FREQUENCY
6/8
THD + NOISE vs Vout
TS524
PACKAGE MECHANICAL DATA
14 PINS - PLASTIC DIP
Millimeters
Inches
Dim.
Min.
a1
B
b
b1
D
E
e
e3
F
i
L
Z
Typ.
0.51
1.39
Max.
Min.
1.65
0.020
0.055
0.5
0.25
Typ.
0.065
0.020
0.010
20
0.787
8.5
2.54
15.24
0.335
0.100
0.600
7.1
5.1
0.280
0.201
3.3
1.27
Max.
0.130
2.54
0.050
0.100
7/8
TS524
PACKAGE MECHANICAL DATA
14 PINS - PLASTIC MICROPACKAGE (SO)
G
c1
b1
e
a1
b
A
a2
C
L
s
e3
E
D
M
8
1
7
F
14
Millimeters
Inches
Dim.
Min.
A
a1
a2
b
b1
C
c1
D (1)
E
e
e3
F (1)
G
L
M
S
Typ.
Max.
Min.
1.75
0.2
1.6
0.46
0.25
0.1
0.35
0.19
Typ.
0.069
0.008
0.063
0.018
0.010
0.004
0.014
0.007
0.5
Max.
0.020
45° (typ.)
8.55
5.8
8.75
6.2
0.336
0.228
1.27
7.62
3.8
4.6
0.5
0.344
0.244
0.050
0.300
4.0
5.3
1.27
0.68
0.150
0.181
0.020
0.157
0.208
0.050
0.027
8° (max.)
Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK.
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2001 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States
© http://www.st.com
8/8