µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 D D D D D 3-Terminal Regulators Output Current up to 100 mA No External Components Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting D PACKAGE (TOP VIEW) OUTPUT COMMON COMMON NC 1 8 2 7 3 6 4 5 INPUT COMMON COMMON NC description/ordering information This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high-current voltage regulators. One of these regulators can deliver up to 100 mA of output current. The internal limiting and thermal-shutdown features of these regulators essentially make them immune to overload. When used as a replacement for a Zener diode-resistor combination, an effective improvement in output impedance can be obtained, together with lower bias current. NC – No internal connection LP PACKAGE (TO-92, TO-226AA) (TOP VIEW) INPUT COMMON OUTPUT PK PACKAGE (TOP VIEW) INPUT The µA78L00C and µA78L00AC series are characterized for operation over the virtual junction temperature range of 0°C to 125°C. The µA78L05AI is characterized for operation over the virtual junction temperature range of –40°C to 125°C. COMMON OUTPUT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2003, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 description/ordering information (continued) ORDERING INFORMATION TJ VO(NOM) (V) OUTPUT VOLTAGE TOLERANCE 2.6 V 5% PACKAGE† 5V Tube of 75 µA78L02ACD 78L02A TO-226/TO-92 (LP) Bulk of 1000 µA78L02ACLP 78L02AC Tube of 75 µA78L05ACD Reel of 2500 µA78L05ACDR Bulk of 1000 µA78L05ACLP Pack of 2000 µA78L05ACLPM Reel of 2000 µA78L05ACLPR Reel of 1000 µA78L05ACPK Tube of 75 µA78L05CD Reel of 2500 µA78L05CDR TO-92 (LP) TO-226AA (LP) Bulk of 1000 µA78L05CLP Reel of 2000 µA78L05CLPR SOT-89 (PK) Tube of µA78L05CPK Bulk of 1000 µA78L06ACLP Reel of 2000 µA78L06ACLPR Reel of 1000 µA78L06ACPK Tube of 75 µA78L08ACD Reel of 2500 µA78L08ACDR Bulk of 1000 µA78L08ACLP Reel of 2000 µA78L08ACLPR Reel of 1000 µA78L08ACPK Tube of 75 µA78L08CD Reel of 2500 µA78L08CDR Tube of 75 µA78L09ACD Reel of 2500 µA78L09ACDR Bulk of 1000 µA78L09ACLP Reel of 2000 µA78L09ACLPR Reel of 1000 µA78L09ACPK Tube of 75 µA78L10ACD Reel of 2500 µA78L10ACDR Bulk of 1000 µA78L10ACLP Reel of 2000 µA78L10ACLPR Reel of 1000 µA78L10ACPK Tube of 75 µA78L12ACD Reel of 2500 µA78L12ACDR Bulk of 1000 µA78L12ACLP Reel of 2000 µA78L12ACLPR TO-226/TO-92 (LP) SOT-89 (PK) SOIC (D) 10% 6.2 V 5% TO-226/TO-92 (LP) SOT-89 (PK) SOIC (D) 5% 0 C to 125°C 0°C 125 C 8V TO-226/TO-92 (LP) SOT-89 (PK) 10% SOIC (D) SOIC (D) 9V 5% TO-226/TO-92 (LP) SOT-89 (PK) SOIC (D) 10 V 5% TO-226/TO-92 (LP) SOT-89 (PK) SOIC (D) 12 V 5% TOP-SIDE MARKING SOIC (D) SOIC (D) 5% ORDERABLE PART NUMBER TO-226/TO-92 (LP) 78L05A 78L05AC F5 78L05C 78L05C B5 78L06AC F6 78L08A 78L08AC F8 78L08C 78L09A 78L09AC F9 78L10A 78L10AC FA 78L12A 78L12AC SOT-89 (PK) Reel of 1000 µA78L12ACPK FC † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 description/ordering information (continued) ORDERING INFORMATION TJ VO(NOM) (V) OUTPUT VOLTAGE TOLERANCE PACKAGE† SOIC (D) 0 C to 125 0°C 125°C C 15 V 5% TO-226/TO-92 (LP) SOT-89 (PK) –40°C to 125°C 5V 5% TO-226/TO-92 (LP) ORDERABLE PART NUMBER Tube of 75 µA78L15ACD Reel of 2500 µA78L15ACDR Bulk of 1000 µA78L15ACLP Reel of 2000 µA78L15ACLPR Reel of 1000 µA78L15ACPK Bulk of 1000 µA78L05AILP Reel of 2000 µA78L05AILPR TOP-SIDE MARKING 78L15A 78L15AC FF 78L05AI † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. schematic INPUT 20 kΩ OUTPUT 1 kΩ to 14 kΩ 1.4 kΩ COMMON NOTE A: Resistor values shown are nominal. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 absolute maximum ratings over virtual junction temperature range (unless otherwise noted)† Input voltage, VI: µA78L02AC, µA78L05C–µA78L09C, µA78L10AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V µA78L12C, µA78L12AC, µA78L15C, µA78L15AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. package thermal data (see Note 1) SOIC (D) High K, JESD 51-7 θJC 39°C/W TO-92/TO-226AA (LP) High K, JESD 51-7 55°C/W 140°C/W SOT-89 (PK) High K, JESD 51-7 9°C/W 52°C/W PACKAGE BOARD θJA 97°C/W NOTE 1: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. Due to variations in individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power levels slightly above or below the rated dissipation. recommended operating conditions MIN MAX 4.75 20 7 20 µA78L06C, µA78L06AC 8.5 20 µA78L08C, µA78L08AC 10.5 23 µA78L09C, µA78L09AC 11.5 24 µA78L10AC 12.5 25 µA78L12C, µA78L12AC 14.5 27 µA78L15C, µA78L15AC 17.5 30 µA78L02AC µA78L05C, µA78L05AC VI IO TJ 4 Input voltage Output current 100 Operating virtual junction temperature range POST OFFICE BOX 655303 µA78LxxC and µA78LxxAC series µA78L05AI • DALLAS, TEXAS 75265 0 125 –40 125 UNIT V mA °C µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 electrical characteristics at specified virtual junction temperature, VI = 9 V, IO = 40 mA (unless otherwise noted) PARAMETER VI = 4.75 V to 20 V, Output voltage Input voltage regulation Ripple rejection IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 4.75 V to 20 V VI = 5 V to 20 V VI = 6 V to 20 V, µA78L02AC TJ† TEST CONDITIONS MIN TYP 2.6 MAX 25°C 2.5 0°C to 125°C 2.45 2.75 0°C to 125°C 2.45 2.75 25°C f = 120 Hz 25°C 43 UNIT 2.7 20 100 16 75 51 V mV dB Output voltage regulation IO = 1 mA to 100 mA IO = 1 mA to 40 mA 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 30 µV 25°C 1.7 V 25°C 3.6 Dropout voltage Bias current Bias current change 12 50 6 25 125°C VI = 5 V to 20 V IO = 1 mA to 40 mA 6 5.5 2.5 0°C to 125°C 0.1 mV mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TEST CONDITIONS VI = 7 V to 20 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 7 V to 20 V TJ‡ µA78L05AC µA78L05AI µA78L05C MIN TYP MAX 25°C 4.6 5 Full range 4.5 Full range 4.5 25°C MIN TYP 5.4 4.8 5 5.5 4.75 5.5 4.75 UNIT MAX 5.2 5.25 V 5.25 32 200 32 150 26 150 26 100 mV Ripple rejection VI = 8 V to 20 V VI = 8 V to 18 V, Output voltage regulation IO = 1 mA to 100 mA IO = 1 mA to 40 mA 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 42 42 µV 25°C 1.7 1.7 V 25°C 3.8 Dropout voltage Bias current Bias current change f = 120 Hz 25°C 40 125°C VI = 8 V to 20 V IO = 1 mA to 40 mA Full range 49 41 49 dB 15 60 15 60 8 30 8 30 6 3.8 6 5.5 5.5 1.5 1.5 0.2 0.1 mV mA mA ‡ Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Full range for the µA78L05AC is TJ = 0°C to 125°C, and full range for the µA78L05AI is TJ = –40°C to 125°C. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 electrical characteristics at specified virtual junction temperature, VI = 12 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TJ† TEST CONDITIONS VI = 8.5 V to 20 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 8.5 V to 20 V µA78L06C TYP MAX MIN TYP MAX 6.2 6.2 6.45 25°C 5.7 6.7 5.95 0°C to 125°C 5.6 6.8 5.9 6.5 0°C to 125°C 5.6 6.8 5.9 6.5 25°C 35 200 35 175 29 150 29 125 Ripple rejection VI = 9 V to 20 V VI = 10 V to 20 V, Output voltage regulation IO = 1 mA to 100 mA IO = 1 mA to 40 mA 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 46 25°C 1.7 25°C 3.9 f = 120 Hz 25°C Dropout voltage Bias current Bias current change 39 48 40 48 80 16 80 9 40 9 40 0°C to 125°C 1.7 3.9 V mV mV µV 46 6 UNIT dB 16 125°C VI = 9 V to 20 V IO = 1 mA to 40 mA µA78L06AC MIN V 6 5.5 5.5 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TJ† TEST CONDITIONS VI = 10.5 V to 23 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 10.5 V to 23 V µA78L08C µA78L08AC MIN TYP MAX MIN TYP MAX 25°C 7.36 8 8.64 7.7 8 8.3 0°C to 125°C 7.2 8.8 7.6 0°C to 125°C 7.2 8.8 7.6 25°C 8.4 UNIT V 8.4 42 200 42 175 36 150 36 125 mV Ripple rejection VI = 11 V to 23 V VI = 13 V to 23 V, Output voltage regulation IO = 1 mA to 100 mA IO = 1 mA to 40 mA 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 54 54 µV 25°C 1.7 1.7 V 25°C 4 f = 120 Hz 25°C Dropout voltage Bias current Bias current change 36 125°C VI = 11 V to 23 V IO = 1 mA to 40 mA 0°C to 125°C 46 37 46 dB 18 80 18 80 10 40 10 40 6 4 6 5.5 5.5 1.5 1.5 0.2 0.1 mV mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 electrical characteristics at specified virtual junction temperature, VI = 16 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage Input voltage regulation TEST CONDITIONS VI = 12 V to 24 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 12 V to 24 V TJ† µA78L09C TYP MAX 9 9.7 8.6 8.1 9.9 8.55 9.45 0°C to 125°C 8.1 9.9 8.55 9.45 225 45 175 40 175 40 125 Output voltage regulation 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 58 25°C 1.7 25°C 4.1 25°C 36 45 45 90 19 90 11 40 11 40 0°C to 125°C 1.7 4.1 mV mV µV 58 6 V dB 19 125°C VI = 13 V to 24 V IO = 1 mA to 40 mA 38 UNIT 9.4 45 IO = 1 mA to 100 mA IO = 1 mA to 40 mA Bias current change 9 MAX 8.3 Ripple rejection Bias current TYP 25°C 25°C Dropout voltage MIN 0°C to 125°C VI = 13 V to 24 V VI = 15 V to 25 V, f = 120 Hz µA78L09AC MIN V 6 5.5 5.5 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage Input voltage regulation Ripple rejection VI = 13 V to 25 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 13 V to 25 V VI = 14 V to 25 V VI = 15 V to 25 V, µA78L10AC TJ† MIN TYP MAX 25°C 9.6 10 10.4 0°C to 125°C 9.5 0°C to 125°C 9.5 TEST CONDITIONS 25°C f = 120 Hz 25°C 37 10.5 175 42 125 44 IO = 1 mA to 100 mA IO = 1 mA to 40 mA 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 62 25°C 1.7 25°C 4.2 Bias current Bias current change 125°C VI = 14 V to 25 V IO = 1 mA to 40 mA 0°C to 125°C V 10.5 51 Output voltage regulation Dropout voltage UNIT mV dB 20 90 11 40 mV µV V 6 5.5 1.5 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 electrical characteristics at specified virtual junction temperature, VI = 19 V, IO = 40 mA (unless otherwise noted) PARAMETER TJ† TEST CONDITIONS VI = 14 V to 27 V, Output voltage Input voltage regulation IO = 1 mA to 40 mA IO = 1 mA to 70 mA VI = 14.5 V to 27 V µA78L12C TYP MAX MIN TYP MAX 12 12 12.5 25°C 11.1 12.9 11.5 0°C to 125°C 10.8 13.2 11.4 12.6 0°C to 125°C 10.8 13.2 11.4 12.6 25°C 55 250 55 250 49 200 49 200 Ripple rejection VI = 16 V to 27 V VI = 15 V to 25 V, Output voltage regulation IO = 1 mA to 100 mA IO = 1 mA to 40 mA 25°C Output noise voltage f = 10 Hz to 100 kHz 25°C 70 25°C 1.7 25°C 4.3 f = 120 Hz 25°C Dropout voltage Bias current Bias current change 36 42 37 42 100 22 100 13 50 13 50 0°C to 125°C V mV mV µV 70 1.7 6.5 UNIT dB 22 125°C VI = 16 V to 27 V IO = 1 mA to 40 mA µA78L12AC MIN V 4.3 6.5 6 6 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. electrical characteristics at specified virtual junction temperature, VI = 23 V, IO = 40 mA (unless otherwise noted) PARAMETER Output voltage VI = 17.5 V to 30 V, IO = 1 mA to 40 mA IO = 1 mA to 70 mA Input voltage regulation Ripple rejection Output voltage regulation Output noise voltage TJ† TEST CONDITIONS TYP MAX 25°C 13.8 15 0°C to 125°C 13.5 0°C to 125°C 13.5 VI = 17.5 V to 30 V 25°C VI = 20 V to 30 V VI = 18.5 V to 28.5 V, f = 120 Hz 25°C IO = 1 mA to 100 mA 33 25°C IO = 1 mA to 40 mA f = 10 Hz to 100 kHz Bias current MIN TYP 16.2 14.4 15 16.5 14.25 16.5 14.25 MAX 15.6 15.75 300 65 300 58 250 58 250 34 V 15.75 65 39 UNIT 39 mV dB 25 150 25 150 15 75 15 75 mV 25°C 82 82 µV 25°C 1.7 1.7 V 25°C 4.6 125°C VI = 10 V to 30 V IO = 1 mA to 40 mA µA78L15AC MIN Dropout voltage Bias current change µA78L15C 0°C to 125°C 6.5 4.6 6.5 6 6 1.5 1.5 0.2 0.1 mA mA † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 APPLICATION INFORMATION µA78Lxx VI VO 0.33 µF 0.1 µF Figure 1. Fixed-Output Regulator IN + µA78Lxx VI OUT G IL COM –VO – Figure 2. Positive Regulator in Negative Configuration (VI Must Float) Input µA78Lxx Output R1 IO 0.33 µF 0.1 µF R2 Figure 3. Adjustable-Output Regulator µA78Lxx Input 0.33 µF R1 VO(Reg) Output IO IO = (VO/R1) + IO Bias Current Figure 4. Current Regulator POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 µA78L00 SERIES POSITIVE-VOLTAGE REGULATORS SLVS010Q – JANUARY 1976 – REVISED AUGUST 2003 APPLICATION INFORMATION 1N4001 µA78L15 20-V Input VO = 15 V 0.33 µF 0.1 µF 1N4001 0.1 µF 0.33 µF 1N4001 µA79L15 –20-V Input VO = –15 V 1N4001 Figure 5. Regulated Dual Supply operation with a load common to a voltage of opposite polarity In many cases, a regulator powers a load that is not connected to ground, but instead, is connected to a voltage source of opposite polarity (e.g., operational amplifiers, level-shifting circuits, etc.). In these cases, a clamp diode should be connected to the regulator output as shown in Figure 6. This protects the regulator from output polarity reversals during startup and short-circuit operation. µA78Lxx VI VO 1N4001 or Equivalent –VO Figure 6. Output Polarity-Reversal-Protection Circuit reverse-bias protection Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This can occur, for example, when the input supply is crowbarred during an output overvoltage condition. If the output voltage is greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could break down and be damaged. To prevent this, a diode shunt can be employed as shown in Figure 7. VI µA78Lxx VO Figure 7. Reverse-Bias-Protection Circuit 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MHSI001 – OCTOBER 1994 PK (R-PSSO-F3) PLASTIC SINGLE-IN-LINE PACKAGE 1,60 1,40 4,60 4,40 0,40 TYP 1,80 MAX 2,60 2,40 4,25 MAX 0,80 MIN 0,48 MAX 0,44 MAX 0,53 MAX 1,50 TYP 4040234 / B 03/95 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. The center lead is in electrical contact with the tab. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOI002B – JANUARY 1995 – REVISED SEPTEMBER 2001 D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 8 PINS SHOWN 0.020 (0,51) 0.014 (0,35) 0.050 (1,27) 8 0.010 (0,25) 5 0.008 (0,20) NOM 0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81) Gage Plane 1 4 0.010 (0,25) 0°– 8° A 0.044 (1,12) 0.016 (0,40) Seating Plane 0.010 (0,25) 0.004 (0,10) 0.069 (1,75) MAX PINS ** 0.004 (0,10) 8 14 16 A MAX 0.197 (5,00) 0.344 (8,75) 0.394 (10,00) A MIN 0.189 (4,80) 0.337 (8,55) 0.386 (9,80) DIM 4040047/E 09/01 NOTES: A. B. C. D. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). Falls within JEDEC MS-012 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.205 (5,21) 0.175 (4,44) 0.165 (4,19) 0.125 (3,17) DIA 0.210 (5,34) 0.170 (4,32) Seating Plane 0.157 (4,00) MAX 0.050 (1,27) C 0.500 (12,70) MIN 0.104 (2,65) FORMED LEAD OPTION 0.022 (0,56) 0.016 (0,41) 0.016 (0,41) 0.014 (0,35) STRAIGHT LEAD OPTION D 0.135 (3,43) MIN 0.105 (2,67) 0.095 (2,41) 0.055 (1,40) 0.045 (1,14) 1 2 3 0.105 (2,67) 0.080 (2,03) 0.105 (2,67) 0.080 (2,03) 4040001-2 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MECHANICAL DATA MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 0.539 (13,70) 0.460 (11,70) 1.260 (32,00) 0.905 (23,00) 0.650 (16,50) 0.610 (15,50) 0.020 (0,50) MIN 0.098 (2,50) 0.384 (9,75) 0.335 (8,50) 0.748 (19,00) 0.217 (5,50) 0.433 (11,00) 0.335 (8,50) 0.748 (19,00) 0.689 (17,50) 0.114 (2,90) 0.094 (2,40) 0.114 (2,90) 0.094 (2,40) 0.169 (4,30) 0.146 (3,70) DIA 0.266 (6,75) 0.234 (5,95) 0.512 (13,00) 0.488 (12,40) TAPE & REEL 4040001-3 /C 10/01 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Applications amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2003, Texas Instruments Incorporated