ROHM UMZU6.2N

UMZU6.2N
Diodes
ESD Protection diode
UMZU6.2N
zApplications
ESD Protection
(common anode configuration)
zLand size figure
zExternal dimensions (Unit : mm)
1.3
0.3±0.1
各リードとも
Each lead has same dimension
同寸法
0.65
0.15±0.05
0.9MIN.
zFeatures
1) Small mold type. (UMD3)
2) High reliability
2.1±0.1
1.25±0.1
(3)
0.8MIN
UMD3
zConstruction
Silicon epitaxial planar
0.1Min
0~0.1
(2)
(1)
(0.65)
1.6
2.0±0.2
(0.65)
zStructure
0.7±0.1
1.3±0.1
0.9±0.1
ROHM : UMD3
JEDEC : SOT-323
JEITA : SC-70
dot (year week factory)
zTaping dimensions (Unit : mm)
φ1.55±0.05
2.0±0.05
0.3±0.1
φ0.5±0.05
4.0±0.1
2.4±0.1
8.0±0.2
0~0.1
2.4±0.1
2.25±0.1
0
5.5±0.2
3.5±0.05
1.75±0.1
4.0±0.1
1.25±0.1
zAbsolute maximum ratings (Ta=25°C)
Parameter
Power dissipation
Junction temperature
Storage temperature
Limits
200
150
-55 to +150
Symbol
P(※)
Tj
Tstg
Unit
mW
℃
℃
(※)Total of 2 elements
zElectrical characteristic (Ta=25°C) (∗ Rating of per diode)
Parameter
Symbol
Min.
Typ.
VZ
Zener voltage
5.9
Reverse current
Operating resistance
Rising operating resistance
Capacitance between terminals
Conditions
Max.
6.50
Unit
V
IZ=5mA
IR
-
-
3.00
µA
VR=5.5V
ZZ
Zzk
Ct
-
8
30
100
-
Ω
Ω
pF
Iz=5mA
IZ=0.5mA
f=1MHz VR=0V
*Zener voltage(Vz) shall be measured at 40ms after loading current.
1/2
UMZU6.2N
Diodes
zElectrical characteristic curves
1000000
REVERSE CURRENT:IR (nA)
ZENER CURRENT:Iz(mA)
Ta=75℃
Ta=125℃
Ta=25℃
1
100
Ta=150℃
100000
Ta=150℃
Ta=-25℃
0.1
Ta=125℃
f=1MHz
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
10
10000
Ta=75℃
1000
Ta=25℃
100
10
10
Ta=-25℃
1
0.1
0.01
5.5
6
6.5
ZENER VOLTAGE:Vz(V)
Vz-Iz CHARACTERISTICS
7
0
1
2
3
4
5
0
6
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
6.5
6.3
6.2
6.1
Ta=25℃
VR=5.5V
n=30pcs
160
140
120
100
80
60
40
AVE:6.155V
AVE:40.68nA
20
6
2
3
4
5
6
10
180
9
CAPACITANCE
BETWEENTERMINALS:Ct(pF)
6.4
1
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
200
Ta=25℃
IZ=5mA
n=30pcs
REVERSE CURRENT:IR(nA)
ZENER VOLTAGE:Vz(V)
1
0.01
5
8
7
6
AVE:8.02pF
Ta=25℃
f=1MHz
VR=0V
n=10pcs
5
4
3
2
1
0
0
IR DISRESION MAP
Vz DISRESION MAP
Ct DISRESION MAP
1000
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
DYNAMIC IMPEDANCE:Zz(Ω)
100
10
1
0.1
1
ZENER CURRENT(mA)
Zz-Iz CHARACTERISTICS
10
Rth(j-a)
100
Rth(j-c)
Mounted on epoxy board
IM=10mA
10
1ms
1
0.001
IF=100mA
time
300us
0.01
0.1
1
10
100
TIME:t(ms)
Rth-t CHARACTERISTICS
1000
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1