ALUMINUM ELECTROLYTIC CAPACITORS VP Bi-Polarized series Standard bi-polarized series for entertainment electronics. Adapted to the RoHS directive (2002/95/EC). ET High Temperature VP Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85°C Rated Voltage Range 6.3 ~ 100V Rated Capacitance Range 0.47 ~ 6800µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 5 minutes' application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. tan δ Rated voltage (V) tan δ (MAX.) 6.3 0.26 10 0.24 16 0.22 25 0.20 35 0.16 Measurement frequency : 120Hz, Temperature : 20°C 50 0.14 63 0.12 100 0.10 Measurement frequency : 120Hz 6.3 4 10 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature After 2000 hours' application of rated voltage at 85°C with the polarity inverted every 250 hours,capacitors meet the characteristic requirements listed at right. Endurance 10 3 8 16 2 6 25 2 5 35 2 4 Capacitance change tan δ Leakage current 50 2 4 Marking Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Type numbering system (Example : 10V 47µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 fd UVP 1 A 4 7 0 MDD Configuration Capacitance tolerance (± 20%) Rated Capacitance (47µF) Rated voltage (10V) Series name Type f P±0.5 D+0.5 MAX Sleeve (P.E.T.) Pressure reliefvent 100 2 3 After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life (f 6.3up) 63 2 3 15MIN L+ MAX (L < 20) 1.5 (L => 20) 2.0 4MIN (mm) D 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 fd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 f • Please refer to page 21 about the end seal configulation. Configuration Pb-free leadwire fD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 ~ 18 HD Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS VP series Dimensions V Cap. (µF) Code 6.3 10 16 25 35 50 63 0J 1A 1C 1E 1V 1H 1J 100 2A 0.47 R47 5 × 11 11 5 × 11 14 1 010 5 × 11 17 5 × 11 21 2.2 2R2 5 × 11 25 6.3 × 11 34 3.3 3R3 5 × 11 27 5 × 11 28 6.3 × 11 39 4.7 4R7 34 6.3 × 11 34 6.3 × 11 47 52 6.3 × 11 57 5 × 11 34 5 × 11 6.3 × 11 5 × 11 42 5 × 11 42 5 × 11 43 5 × 11 57 6.3 × 11 65 6.3 × 11 73 10 100 22 220 33 330 5 × 11 47 470 5 × 11 100 101 6.3 × 11 220 221 8 × 11.5 215 330 331 8 × 11.5 265 470 471 10 × 12.5 370 1000 102 10 × 20 650 12.5 × 20 2200 222 12.5 × 25 1160 16 × 25 1280 16 × 31.5 1510 3300 332 16 × 25 1570 16 × 31.5 1690 18 × 35.5 1980 4700 472 16 × 31.5 2020 18 × 35.5 2160 6800 682 18 × 35.5 2600 5 × 11 57 64 5 × 11 64 5 × 11 70 6.3 × 11 80 8 × 11.5 76 5 × 11 76 6.3 × 11 95 6.3 × 11 95 8 × 11.5 125 6.3 × 11 125 8 × 11.5 160 215 10 × 12.5 275 10 × 16 305 12.5 × 20 410 12.5 × 25 10 × 16 345 10 × 16 375 12.5 × 20 450 12.5 × 20 505 10 × 16 410 10 × 20 485 12.5 × 20 540 12.5 × 25 655 8 × 11.5 720 12.5 × 25 855 8 × 11.5 16 × 25 160 950 10 × 16 8 × 11.5 71 10 × 16 135 10 × 12.5 135 12.5 × 20 220 10 × 16 180 12.5 × 20 240 320 16 × 25 425 16 × 25 575 18 × 35.5 720 650 16 × 31.5 655 835 18 × 35.5 965 8 × 11.5 8 × 11.5 89 100 8 × 11.5 105 120 10 × 12.5 150 230 10 × 20 265 12.5 × 20 480 16 × 25 16 × 31.5 95 16 × 31.5 1140 18 × 35.5 1620 Case size Rated φ D × L (mm) ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz ~ 0000 ~ 4700 0.75 1.00 1.35 1.57 2.00 0100 ~ 4700 0.80 1.00 1.23 1.34 1.50 1000 ~ 6800 0.85 1.00 1.10 1.13 1.15 Cap.(µF) CAT.8100V