ALUMINUM ELECTROLYTIC CAPACITORS MP 5mmL, Bi-Polarized series Bi-polarized series with 5mm height. Adapted to the RoHS directive (2002/95/EC). MP MA Bi-polarized Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85°C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 47µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.05CV or 10 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ 6.3 0.24 Rated voltage (V) tan δ (MAX.) 10 0.20 16 0.17 25 0.17 35 0.15 50 0.15 Measurement frequency : 120Hz Stability at Low Temperature 6.3 4 8 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 Endurance After 2000 hours' application of rated voltage at 85°C with the polarity inverted every 250 hours, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Type numbering system (Example : 10V 33µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 UMP 1 A 3 3 0 M D D P ±0.5 φ D+0.5 MAX Configuration Capacitance tolerance (± 20%) Rated capacitance (33µF) (mm) 15 MIN L+1MAX φD 4 MIN 4 P 1.5 φ d 0.45 5 6.3 2.0 0.45 2.5 0.45 Rated voltage (10V) Series name Type Configuration φD Pb-free leadwire Pb-free PET sleeve 4 ~ 6.3 DD Dimensions V Cap.(µF) 0.10 0.22 0.33 0.47 10.1 2.20 3.30 4.70 100.1 220.1 330.1 470.1 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 6.3 0J 0.5 × 5 6.3 × 5 6.3 × 5 10 1A 28 37 45 0.4 × 5 6.3 × 5 6.3 × 5 25 1E 16 1C 17 33 41 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 12 23 37 49 0.5 × 5 0.5 × 5 6.3 × 5 35 1V 12 16 27 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 8.4 16 18 29 50 1H 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 Case size φ D × L (mm) 1.0 2.0 2.8 4.0 8.4 13 17 20 Rated ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V