ALUMINUM ELECTROLYTIC CAPACITORS ML 5mmL, Low Leakage Current series Low leakage current series with 5mm height. Adapted to the RoHS directive (2002/95/EC). Low Leakage Current MA ML Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85°C Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 100µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.002CV or 0.4 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ 4 0.35 Rated voltage (V) tan δ ( MAX.) 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz 4 7 15 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 6.3 4 10 After 1000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Endurance 10 3 8 16 2 6 25 2 4 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 U ML 1 A 3 3 0 M DD Configuration P ±0.5 φ D+0.5 MAX Capacitance tolerance (± 20%) Rated capacitance (33µF) Rated voltage (10V) 15MIN L+1MAX Serise name (mm) 4MIN φD 4 P 1.5 φ d 0.45 5 6.3 2.0 0.45 2.5 0.45 Type Configuration Pb-free leadwire Pb-free PET sleeve φD 4 ~ 6.3 DD Dimensions Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 V Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 4 0G 0.5 × 5 0.5 × 5 6.3 × 5 6.3 0J 28 33 56 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 10 1A 28 37 45 70 0.5 × 5 0.5 × 5 6.3 × 5 16 1C 33 41 52 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 25 1E 23 37 49 58 0.4 × 5 0.5 × 5 6.3 × 5 6.3 × 5 35 1V 16 27 42 52 0.4 × 5 0.5 × 5 6.3 × 5 18 29 46 50 1H 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.4 × 5 0.5 × 5 0.5 × 5 6.3 × 5 Case size φ D × L (mm) 1.0 2.0 2.8 4.0 8.4 13 17 20 33 Rated ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V