MODULES 48V 2nd Gen 5 0 - 5 0 0 W P C B M O U N T I N G C O M P O N E N T S Features • • • • • • Input Voltage: 36-75Vdc Output Voltage: 2-48Vdc Output Power (per module) Micro: 150W, Mini: 250W, Maxi: 500W Efficiency: Up to 90% Agency Approvals: UL, CSA, TUV, VDE, BABT,CE Marked, C-Tick Specifications Selection Table GENERAL OUTPUT VOLTAGE (VDC) NOTES Set point accuracy ±1%Vout nom Nominal input; 2V Line regulation ±0.02%Vout nom. Low line to high 3.3V 264 150 75 400 200 100/75/50 Load regulation ±0.02%Vout nom. No load to full 5V Temperature regulation ±0.002%Vout/°C -20°C to 100oC 12V 500 250 150 15V 500 250 150 24V 500 250 150 Ripple and noise, p-p 100 mV Full load, 20MHz Remote sense compensation 0.5 Volts 28V 500 250 150 Overvoltage set point 115% Vout nom. 48V 500 250 150 Current limit 115% out max. Vout 95% of Efficiency: 5Vout 24Vout 83% Nominal input; 88% Product Grade Specifications E C T H M Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Programming range 10-110 % Vout nom. Short circuit current 115% out max. Output Voltage Isolation voltage 3000 Vrms Input to Output Temp. Cycling none none none Burn-In none none none 12 hours (typical unless otherwise noted) Low Temp.Test (°C) none none none -40°C -55°C STANDARDS AND APPROVALS High Temp.Test (°C) none none none 100°C 100°C C-Tick Final Test Data none none none AS/NZS CISPR11 Group 1 Class A (°C) Part Numbering 48 24 hours 24 hours (-55 to 125) (-65 to 125) Mechanical Drawings refer to page 237-238 234 OUTPUT POWER (W) MAXI MINI MICRO N/A 100 50 UNITS 24 hours