V602ME06-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Spread Spectrum Radios • Basestations • Satellite Modems £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1145 Typ Max Units 1245 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -101 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 0.3 3.0 MHz/V 84 Tuning Sensitivity (avg.) 9 dBm Input Capacitance 50 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) 14 MHz 85 °C Max Units Power Output 4 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 6.5 Vdc MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 3.3 Supply Current (Icc) 17 Vdc 21 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V602ME06-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 1340 1320 1300 1280 1260 1240 1220 1200 1180 1160 1140 1120 1100 1080 1060 1040 1020 1000 85 °C 25 °C -40 °C 0 0.6 1.2 1.8 2.4 3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 1034 1105 1162 1213 1260 1306 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B